TL972IDR
Or copy the link below:
- Mfr.Part #
- TL972IDR
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 1,003
- In Stock ：
- 1,003
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Lifecycle Status :
- ACTIVE (Last Updated: 5 days ago)
- Max I/O Voltage :
- 4mV
- Architecture :
- VOLTAGE-FEEDBACK
- Amplifier Type :
- GENERAL PURPOSE
- Low-Offset :
- No
- Unity Gain BW-Nom :
- 12000 kHz
- Number of Terminations :
- 14
- Voltage - Supply, Single/Dual (±) :
- 2.7V~12V ±1.35V~6V
- Packing Method :
- TR
- Surface Mount :
- yes
- Frequency Compensation :
- yes
- Low-Bias :
- No
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Supply Voltage Limit-Max :
- 15V
- Number of Channels :
- 2
- Radiation Hardening :
- No
- Number of Functions :
- 2
- ECCN Code :
- EAR99
- Input Offset Current-Max (IIO) :
- 0.15μA
- Length :
- 4.9mm
- Bandwidth :
- 12MHz
- Programmable Power :
- No
- Output Type :
- Rail-to-Rail
- Thickness :
- 1.58mm
- Micropower :
- No
- Bias Current-Max (IIB) @25C :
- 0.75μA
- REACH SVHC :
- No SVHC
- Terminal Position :
- Dual
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Nominal Supply Current :
- 5.6mA
- Base Part Number :
- TL972
- Factory Lead Time :
- 12 Weeks
- Current - Input Bias :
- 200nA
- Pbfree Code :
- yes
- Supply Voltage :
- 2.5V
- Terminal Form :
- Gull wing
- Voltage Gain :
- 80dB
- Pin Count :
- 14
- Operating Supply Current :
- 2mA
- JESD-609 Code :
- e4
- Lead Free :
- Lead Free
- Peak Reflow Temperature (Cel) :
- 260
- RoHS Status :
- ROHS3 Compliant
- Neg Supply Voltage-Nom (Vsup) :
- -2.5V
- Slew Rate :
- 5V/μs
- Operating Temperature :
- -40°C~125°C
- Operating Supply Voltage :
- 6V
- Nominal Gain Bandwidth Product :
- 12MHz
- Input Offset Voltage (Vos) :
- 4mV
- Output Current per Channel :
- 80mA
- Width :
- 3.91mm
- Height :
- 1.75mm
- Common Mode Rejection Ratio :
- 60 dB
- Average Bias Current-Max (IIB) :
- 0.75μA
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Power :
- No
- Mounting Type :
- Surface Mount
- Packaging :
- Tape and Reel (TR)
- Voltage - Input Offset :
- 1mV
- Number of Pins :
- 8
- Datasheets
- TL972IDR
2 Channels 80mA per Channel 200nA 60 dB Instrumentational OP Amps 0.75μA 6V 2.7V~12V ±1.35V~6V TL972 14 Pins 8-SOIC (0.154, 3.90mm Width)
TL972IDR Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 14. The pins on this board total to 14 in total. I would like to remind you that this buffer op amp should be powered by an 2.5V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 4mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 2mA, this op amp ic can operate. 80dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 2 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 6V. For packing the buffer amplifier, the TR-axis is adopted.
TL972IDR Features
14 Pins
supply voltage of 2.5V
80dB voltage gain
Output Type: Rail-to-Rail
TL972IDR Applications
There are a lot of Texas Instruments
TL972IDR Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
