TL972ID
Or copy the link below:
- Mfr.Part #
- TL972ID
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 1,569
- In Stock ：
- 1,569
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Number of Terminations :
- 14
- ECCN Code :
- EAR99
- Pin Count :
- 14
- Common Mode Rejection Ratio :
- 60 dB
- Radiation Hardening :
- No
- Power :
- No
- Length :
- 4.9mm
- Voltage - Input Offset :
- 1mV
- Surface Mount :
- yes
- Architecture :
- VOLTAGE-FEEDBACK
- Frequency Compensation :
- yes
- Base Part Number :
- TL972
- Width :
- 3.91mm
- Bias Current-Max (IIB) @25C :
- 0.75μA
- Output Current per Channel :
- 80mA
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Nominal Gain Bandwidth Product :
- 12MHz
- Operating Supply Current :
- 2mA
- Slew Rate :
- 5V/μs
- RoHS Status :
- ROHS3 Compliant
- Input Offset Voltage (Vos) :
- 4mV
- JESD-609 Code :
- e4
- Number of Pins :
- 8
- Supply Voltage :
- 2.5V
- Lead Free :
- Lead Free
- Terminal Position :
- Dual
- Terminal Form :
- Gull wing
- Voltage - Supply, Single/Dual (±) :
- 2.7V~12V ±1.35V~6V
- Peak Reflow Temperature (Cel) :
- 260
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Factory Lead Time :
- 6 Weeks
- Current - Input Bias :
- 200nA
- Micropower :
- No
- Neg Supply Voltage-Nom (Vsup) :
- -2.5V
- Unity Gain BW-Nom :
- 12000 kHz
- Mounting Type :
- Surface Mount
- Operating Supply Voltage :
- 6V
- Low-Offset :
- No
- Voltage Gain :
- 80dB
- Number of Functions :
- 2
- Thickness :
- 1.58mm
- Average Bias Current-Max (IIB) :
- 0.75μA
- Max I/O Voltage :
- 4mV
- Operating Temperature :
- -40°C~125°C
- Number of Channels :
- 2
- Height :
- 1.75mm
- Dual Supply Voltage :
- 5V
- Input Offset Current-Max (IIO) :
- 0.15μA
- Programmable Power :
- No
- Amplifier Type :
- GENERAL PURPOSE
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- REACH SVHC :
- No SVHC
- Bandwidth :
- 12MHz
- Lifecycle Status :
- ACTIVE (Last Updated: 5 days ago)
- Low-Bias :
- No
- Output Type :
- Rail-to-Rail
- Nominal Supply Current :
- 5.6mA
- Packaging :
- Tube
- Pbfree Code :
- yes
- Datasheets
- TL972ID
2 Channels 80mA per Channel 200nA 60 dB Instrumentational OP Amps 0.75μA 6V 2.7V~12V ±1.35V~6V TL972 14 Pins 8-SOIC (0.154, 3.90mm Width)
TL972ID Overview
It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 14 terminations this year. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 2.5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 4mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 2mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 80dB. There are a total of 2 channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 6V.
TL972ID Features
14 Pins
supply voltage of 2.5V
80dB voltage gain
Output Type: Rail-to-Rail
TL972ID Applications
There are a lot of Texas Instruments
TL972ID Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
