TS1872AIYDT
- Mfr.Part #
- TS1872AIYDT
- Manufacturer
- STMicroelectronics
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 16,480
- In Stock :
- 16,480
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- STMicroelectronics
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Packaging :
- Tape and Reel (TR)
- Output Type :
- Rail-to-Rail
- Lifecycle Status :
- ACTIVE (Last Updated: 7 months ago)
- Input Offset Voltage (Vos) :
- 100μV
- Supplier Device Package :
- 8-SO
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Current - Supply :
- 500μA
- Voltage - Supply, Single/Dual (±) :
- 1.8V~6V
- Output Current per Channel :
- 80mA
- Operating Supply Current :
- 500μA
- Operating Temperature :
- -40°C~125°C
- Current - Input Bias :
- 70nA
- RoHS Status :
- ROHS3 Compliant
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Radiation Hardening :
- No
- Mounting Type :
- Surface Mount
- Common Mode Rejection Ratio :
- 55 dB
- Number of Pins :
- 8
- Amplifier Type :
- GENERAL PURPOSE
- Number of Channels :
- 2
- Nominal Supply Current :
- 560μA
- Max Supply Voltage :
- 6V
- Base Part Number :
- TS1872
- Gain Bandwidth Product :
- 1.8MHz
- Min Operating Temperature :
- -40°C
- Max Operating Temperature :
- 125°C
- Slew Rate :
- 0.6V/µs
- Min Supply Voltage :
- 1.8V
- Voltage - Input Offset :
- 100μV
- Number of Circuits :
- 2
- Series :
- Automotive, AEC-Q100
- Voltage Gain :
- 97dB
- Factory Lead Time :
- 10 Weeks
- Output Current :
- 68mA
- Mount :
- Surface Mount
- Current - Output / Channel :
- 80mA
- Datasheets
- TS1872AIYDT

2 Channels 80mA per Channel 70nA 55 dB Instrumentational OP Amps 1.8V~6V TS1872 8-SOIC (0.154, 3.90mm Width)
TS1872AIYDT Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 100μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 500μA and 10 . Maintain 97dB as the voltage gain. In total, there are 2 circuits on this buffer amplifier. Buffer op amp is equipped with 2 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is recommended that the temperature of this op amp ic should not fall below -40°C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 125°C degrees. This electronic part is recommended to be used with an 500μA supply for best performance. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 6V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 1.8V when using it. Automotive, AEC-Q100 is the number that corresponds to the series of the buffer op amp.
TS1872AIYDT Features
97dB voltage gain
Output Type: Rail-to-Rail
TS1872AIYDT Applications
There are a lot of STMicroelectronics
TS1872AIYDT Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















