TLV2782CDGKR
- Mfr.Part #
- TLV2782CDGKR
- Manufacturer
- Texas Instruments
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8VSSOP
- Stock
- 2,054
- In Stock :
- 2,054
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Surface Mount :
- yes
- Lead Free :
- Lead Free
- JESD-609 Code :
- e4
- Lifecycle Status :
- ACTIVE (Last Updated: 6 days ago)
- Number of Elements :
- 2
- Slew Rate :
- 5V/μs
- Output Current per Channel :
- 23mA
- Voltage - Input Offset :
- 250μV
- Operating Temperature :
- 0°C~70°C
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Nominal Supply Current :
- 1.54mA
- Number of Functions :
- 2
- Width :
- 3mm
- Low-Bias :
- yes
- Max I/O Voltage :
- 3mV
- Output Current :
- 23mA
- Terminal Position :
- Dual
- Terminal Form :
- Gull wing
- Nominal Gain Bandwidth Product :
- 8MHz
- Number of Pins :
- 8
- Base Part Number :
- TLV2782
- Frequency Compensation :
- yes
- Low-Offset :
- No
- Output Type :
- Rail-to-Rail
- Pbfree Code :
- yes
- Current - Input Bias :
- 2.5pA
- Bandwidth :
- 8MHz
- Radiation Hardening :
- No
- Terminal Pitch :
- 0.65mm
- Voltage Gain :
- 120dB
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Power Dissipation :
- 481mW
- Packing Method :
- TR
- Mounting Type :
- Surface Mount
- Input Offset Current-Max (IIO) :
- 0.000015μA
- Pin Count :
- 8
- ECCN Code :
- EAR99
- Input Offset Voltage (Vos) :
- 3mV
- Factory Lead Time :
- 6 Weeks
- Architecture :
- VOLTAGE-FEEDBACK
- Supply Voltage Limit-Max :
- 4V
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Thickness :
- 970μm
- Height :
- 1.07mm
- Supply Voltage :
- 2.7V
- Common Mode Rejection Ratio :
- 50 dB
- Length :
- 3mm
- Programmable Power :
- No
- RoHS Status :
- ROHS3 Compliant
- Voltage - Supply, Single/Dual (±) :
- 1.8V~3.6V ±0.9V~1.8V
- Number of Terminations :
- 8
- Packaging :
- Cut Tape (CT)
- Bias Current-Max (IIB) @25C :
- 0.000015μA
- Operating Supply Current :
- 650μA
- Micropower :
- yes
- Unity Gain BW-Nom :
- 8000 kHz
- Amplifier Type :
- GENERAL PURPOSE
- Average Bias Current-Max (IIB) :
- 0.0001μA
- Peak Reflow Temperature (Cel) :
- 260
- Datasheets
- TLV2782CDGKR

23mA per Channel 2.5pA 50 dB Instrumentational OP Amps 0.0001μA 1.8V~3.6V ±0.9V~1.8V TLV2782 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
TLV2782CDGKR Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Cut Tape (CT) case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 2.7V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . An 650μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. There are a total of 2 elements in this linear amplifier. The instrumentation amplifier is packed in the form of TR.
TLV2782CDGKR Features
8 Pins
supply voltage of 2.7V
120dB voltage gain
Output Type: Rail-to-Rail
TLV2782CDGKR Applications
There are a lot of Texas Instruments
TLV2782CDGKR Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















