TLV2474CDR
- Mfr.Part #
- TLV2474CDR
- Manufacturer
- Texas Instruments
- Package / Case
- 14-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC CMOS 4 CIRCUIT 14SOIC
- Stock
- 7,100
- In Stock :
- 7,100
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Pin Count :
- 14
- Unity Gain BW-Nom :
- 2800 kHz
- Width :
- 3.91mm
- Number of Pins :
- 14
- Output Current per Channel :
- 35mA
- Average Bias Current-Max (IIB) :
- 0.0001μA
- Bandwidth :
- 2.8MHz
- Architecture :
- VOLTAGE-FEEDBACK
- Voltage - Supply, Single/Dual (±) :
- 2.7V~6V ±1.35V~3V
- Operating Temperature :
- 0°C~70°C
- Current - Input Bias :
- 2.5pA
- Lead Free :
- Lead Free
- Operating Supply Voltage :
- 3V
- Base Part Number :
- TLV2474
- Height :
- 1.75mm
- Thickness :
- 1.58mm
- Contact Plating :
- Gold
- Terminal Form :
- Gull wing
- Factory Lead Time :
- 6 Weeks
- Lifecycle Status :
- ACTIVE (Last Updated: 2 days ago)
- Length :
- 8.65mm
- Output Type :
- Rail-to-Rail
- ECCN Code :
- EAR99
- Max I/O Voltage :
- 2.2mV
- Nominal Supply Current :
- 3.6mA
- JESD-609 Code :
- e4
- Amplifier Type :
- GENERAL PURPOSE
- Packaging :
- Cut Tape (CT)
- Bias Current-Max (IIB) @25C :
- 0.00005μA
- Radiation Hardening :
- No
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Supply Voltage :
- 3V
- Power Dissipation :
- 1.022W
- Voltage - Input Offset :
- 250μV
- Number of Functions :
- 4
- RoHS Status :
- ROHS3 Compliant
- Micropower :
- No
- Low-Bias :
- yes
- Input Offset Current-Max (IIO) :
- 0.00005μA
- Common Mode Rejection Ratio :
- 61 dB
- Programmable Power :
- No
- Voltage Gain :
- 120dB
- Output Current :
- 35mA
- Peak Reflow Temperature (Cel) :
- 260
- Packing Method :
- TR
- Frequency Compensation :
- yes
- Input Offset Voltage (Vos) :
- 2.2mV
- Supply Voltage Limit-Max :
- 7V
- Package / Case :
- 14-SOIC (0.154, 3.90mm Width)
- Number of Elements :
- 4
- Mounting Type :
- Surface Mount
- Terminal Position :
- Dual
- Surface Mount :
- yes
- Power Supplies :
- +-1.35/+-3/2.7/6V
- Slew Rate :
- 1.5V/µs
- Operating Supply Current :
- 600μA
- Max Power Dissipation :
- 1.022W
- Number of Terminations :
- 14
- Pbfree Code :
- yes
- Low-Offset :
- No
- Terminal Pitch :
- 1.27mm
- Datasheets
- TLV2474CDR

35mA per Channel 2.5pA 61 dB Instrumentational OP Amps 0.0001μA 3V 2.7V~6V ±1.35V~3V TLV2474 14 Pins 14-SOIC (0.154, 3.90mm Width)
TLV2474CDR Overview
In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. It has 14 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 2.2mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 600μA and 10 . Maintain 120dB as the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a whole, there are 4 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. As a result of this, the buffer amplifier is packed in TR.
TLV2474CDR Features
14 Pins
supply voltage of 3V
120dB voltage gain
Output Type: Rail-to-Rail
TLV2474CDR Applications
There are a lot of Texas Instruments
TLV2474CDR Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















