TLV2454IDRG4
- Mfr.Part #
- TLV2454IDRG4
- Manufacturer
- Texas Instruments
- Package / Case
- 14-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14SOIC
- Stock
- 6,512
- In Stock :
- 6,512
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Bandwidth :
- 220 kHz
- Length :
- 8.65mm
- Width :
- 3.91mm
- Voltage Gain :
- 103dB
- Number of Elements :
- 4
- JESD-609 Code :
- e4
- Operating Temperature :
- -40°C~125°C
- Output Current :
- 10mA
- Height :
- 1.75mm
- Radiation Hardening :
- No
- Operating Supply Voltage :
- 3V
- Bias Current-Max (IIB) @25C :
- 0.005μA
- Supply Voltage :
- 3V
- Low-Offset :
- No
- Common Mode Rejection Ratio :
- 70 dB
- Power Dissipation :
- 1.022W
- Input Offset Voltage (Vos) :
- 1.5mV
- Micropower :
- yes
- Programmable Power :
- No
- Frequency Compensation :
- yes
- Voltage - Input Offset :
- 300µV
- Package / Case :
- 14-SOIC (0.154, 3.90mm Width)
- Nominal Supply Current :
- 168μA
- Lead Free :
- Lead Free
- Output Type :
- Rail-to-Rail
- Packing Method :
- TR
- Lifecycle Status :
- ACTIVE (Last Updated: 6 days ago)
- RoHS Status :
- ROHS3 Compliant
- Average Bias Current-Max (IIB) :
- 0.007μA
- Terminal Pitch :
- 1.27mm
- Output Current per Channel :
- 10mA
- Operating Supply Current :
- 23µA
- Base Part Number :
- TLV2454
- Unity Gain BW-Nom :
- 220 kHz
- Pbfree Code :
- yes
- Thickness :
- 1.58mm
- Terminal Position :
- Dual
- Packaging :
- Tape and Reel (TR)
- Terminal Form :
- Gull wing
- Surface Mount :
- yes
- Supply Voltage Limit-Max :
- 7V
- Number of Pins :
- 14
- Architecture :
- VOLTAGE-FEEDBACK
- Pin Count :
- 14
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Mounting Type :
- Surface Mount
- Number of Functions :
- 4
- Factory Lead Time :
- 6 Weeks
- Current - Input Bias :
- 500pA
- Low-Bias :
- No
- Voltage - Supply, Single/Dual (±) :
- 2.7V~6V ±1.35V~3V
- ECCN Code :
- EAR99
- Peak Reflow Temperature (Cel) :
- 260
- Power Supplies :
- +-1.35/+-3/2.7/6V
- Amplifier Type :
- GENERAL PURPOSE
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Slew Rate :
- 0.11V/µs
- Max I/O Voltage :
- 1.5mV
- Number of Terminations :
- 14
- Datasheets
- TLV2454IDRG4

10mA per Channel 500pA 70 dB Instrumentational OP Amps 0.007μA 3V 2.7V~6V ±1.35V~3V TLV2454 14 Pins 14-SOIC (0.154, 3.90mm Width)
TLV2454IDRG4 Overview
In order to protect the op amps, a 14-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 14. It consists of a total of 14 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. It has 14 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 1.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 23μA and 10 . Maintain 103dB as the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a whole, there are 4 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. As a result of this, the buffer amplifier is packed in TR.
TLV2454IDRG4 Features
14 Pins
supply voltage of 3V
103dB voltage gain
Output Type: Rail-to-Rail
TLV2454IDRG4 Applications
There are a lot of Texas Instruments
TLV2454IDRG4 Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















