TLV2454IDR
- Mfr.Part #
- TLV2454IDR
- Manufacturer
- Texas Instruments
- Package / Case
- 14-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14SOIC
- Stock
- 12,378
- In Stock :
- 12,378
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Frequency Compensation :
- yes
- Micropower :
- yes
- Amplifier Type :
- GENERAL PURPOSE
- Lead Free :
- Lead Free
- Height :
- 1.75mm
- Number of Functions :
- 4
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Package / Case :
- 14-SOIC (0.154, 3.90mm Width)
- Input Offset Voltage (Vos) :
- 1.5mV
- Unity Gain BW-Nom :
- 220 kHz
- Output Current per Channel :
- 10mA
- ECCN Code :
- EAR99
- Power Supplies :
- +-1.35/+-3/2.7/6V
- Slew Rate :
- 0.11V/µs
- Power Dissipation :
- 1.022W
- Number of Elements :
- 4
- Voltage - Input Offset :
- 300µV
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Terminal Form :
- Gull wing
- Mounting Type :
- Surface Mount
- Voltage Gain :
- 103dB
- Current - Input Bias :
- 500pA
- Low-Offset :
- No
- Low-Bias :
- No
- JESD-609 Code :
- e4
- Average Bias Current-Max (IIB) :
- 0.007μA
- Common Mode Rejection Ratio :
- 70 dB
- Pin Count :
- 14
- Packing Method :
- TR
- Surface Mount :
- yes
- Supply Voltage :
- 3V
- Bandwidth :
- 220 kHz
- Terminal Position :
- Dual
- Operating Supply Voltage :
- 3V
- Nominal Supply Current :
- 168μA
- Bias Current-Max (IIB) @25C :
- 0.005μA
- Output Type :
- Rail-to-Rail
- RoHS Status :
- ROHS3 Compliant
- Architecture :
- VOLTAGE-FEEDBACK
- Number of Terminations :
- 14
- Supply Voltage Limit-Max :
- 7V
- Lifecycle Status :
- ACTIVE (Last Updated: 2 days ago)
- Packaging :
- Cut Tape (CT)
- Max I/O Voltage :
- 1.5mV
- Thickness :
- 1.58mm
- Operating Temperature :
- -40°C~125°C
- Operating Supply Current :
- 23µA
- Length :
- 8.65mm
- Terminal Pitch :
- 1.27mm
- Radiation Hardening :
- No
- Voltage - Supply, Single/Dual (±) :
- 2.7V~6V ±1.35V~3V
- Peak Reflow Temperature (Cel) :
- 260
- Programmable Power :
- No
- Pbfree Code :
- yes
- Number of Pins :
- 14
- Output Current :
- 10mA
- Width :
- 3.91mm
- Factory Lead Time :
- 6 Weeks
- Base Part Number :
- TLV2454
- Datasheets
- TLV2454IDR

10mA per Channel 500pA 70 dB Instrumentational OP Amps 0.007μA 3V 2.7V~6V ±1.35V~3V TLV2454 14 Pins 14-SOIC (0.154, 3.90mm Width)
TLV2454IDR Overview
Packaging for the buffer amplifier is in the form of a 14-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Cut Tape (CT) case that is delivered with the instrumentation amplifiers. A total of 14 terminations have been reported in the past few weeks. Buffer amplifier has a total of 14 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 3V. An 14-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 1.5mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 23μA , this buffer op amp will be able to operate. Keeping the voltage gain at 103dB is the best course of action. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. A total of 4 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 3V. A TR-shaped amplifier is used to pack the buffer amps.
TLV2454IDR Features
14 Pins
supply voltage of 3V
103dB voltage gain
Output Type: Rail-to-Rail
TLV2454IDR Applications
There are a lot of Texas Instruments
TLV2454IDR Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















