TLV2452CDGKR
- Mfr.Part #
- TLV2452CDGKR
- Manufacturer
- Texas Instruments
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8VSSOP
- Stock
- 30,342
- In Stock :
- 30,342
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Supply Voltage Limit-Max :
- 7V
- Max Power Dissipation :
- 481mW
- Terminal Form :
- Gull wing
- Packaging :
- Cut Tape (CT)
- Radiation Hardening :
- No
- Power Dissipation :
- 481mW
- Common Mode Rejection Ratio :
- 70 dB
- Number of Elements :
- 2
- RoHS Status :
- ROHS3 Compliant
- Operating Supply Voltage :
- 3V
- ECCN Code :
- EAR99
- Architecture :
- VOLTAGE-FEEDBACK
- Factory Lead Time :
- 6 Weeks
- Unity Gain BW-Nom :
- 220 kHz
- Low-Bias :
- No
- Amplifier Type :
- GENERAL PURPOSE
- Thickness :
- 970μm
- Max I/O Voltage :
- 1.5mV
- Operating Supply Current :
- 23µA
- Output Current :
- 10mA
- Lifecycle Status :
- ACTIVE (Last Updated: 2 days ago)
- JESD-609 Code :
- e4
- Length :
- 3mm
- Packing Method :
- TR
- Output Current per Channel :
- 10mA
- Number of Terminations :
- 8
- Bias Current-Max (IIB) @25C :
- 0.005μA
- Height :
- 1.07mm
- Width :
- 3mm
- Current - Input Bias :
- 500pA
- Mounting Type :
- Surface Mount
- Base Part Number :
- TLV2452
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Voltage - Supply, Single/Dual (±) :
- 2.7V~6V ±1.35V~3V
- Micropower :
- yes
- Number of Functions :
- 2
- Number of Pins :
- 8
- Programmable Power :
- No
- Average Bias Current-Max (IIB) :
- 0.007μA
- Frequency Compensation :
- yes
- Voltage - Input Offset :
- 300µV
- Output Type :
- Rail-to-Rail
- Lead Free :
- Lead Free
- Operating Temperature :
- 0°C~70°C
- Bandwidth :
- 220 kHz
- Surface Mount :
- yes
- Voltage Gain :
- 103dB
- Input Offset Current-Max (IIO) :
- 0.00045μA
- Supply Voltage :
- 3V
- Nominal Supply Current :
- 84μA
- Peak Reflow Temperature (Cel) :
- 260
- Terminal Pitch :
- 0.65mm
- Low-Offset :
- No
- Pin Count :
- 8
- Input Offset Voltage (Vos) :
- 1.5mV
- Slew Rate :
- 0.11V/µs
- Pbfree Code :
- yes
- Terminal Position :
- Dual
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Contact Plating :
- Gold
- Datasheets
- TLV2452CDGKR

10mA per Channel 500pA 70 dB Instrumentational OP Amps 0.007μA 3V 2.7V~6V ±1.35V~3V TLV2452 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
TLV2452CDGKR Overview
In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 1.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 23μA and 10 . Maintain 103dB as the voltage gain. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a whole, there are 2 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. As a result of this, the buffer amplifier is packed in TR.
TLV2452CDGKR Features
8 Pins
supply voltage of 3V
103dB voltage gain
Output Type: Rail-to-Rail
TLV2452CDGKR Applications
There are a lot of Texas Instruments
TLV2452CDGKR Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















