TLV2371IP
- Mfr.Part #
- TLV2371IP
- Manufacturer
- Texas Instruments
- Package / Case
- 8-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8DIP
- Stock
- 3,556
- In Stock :
- 3,556
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Nominal Supply Current :
- 900μA
- Voltage - Supply, Single/Dual (±) :
- 2.7V~16V ±1.35V~8V
- Operating Temperature :
- -40°C~125°C
- Length :
- 9.81mm
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Base Part Number :
- TLV2371
- Nominal Gain Bandwidth Product :
- 3MHz
- Packaging :
- Tube
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Frequency Compensation :
- yes
- Lead Free :
- Lead Free
- Number of Functions :
- 1
- Number of Terminations :
- 8
- Factory Lead Time :
- 6 Weeks
- Pin Count :
- 8
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Thickness :
- 3.9mm
- Number of Channels :
- 1
- Current - Input Bias :
- 1pA
- Voltage - Input Offset :
- 2mV
- Power Dissipation :
- 1.2W
- JESD-609 Code :
- e4
- Slew Rate :
- 2.1V/μs
- Height :
- 5.08mm
- Width :
- 6.35mm
- Micropower :
- No
- Surface Mount :
- No
- Amplifier Type :
- GENERAL PURPOSE
- Architecture :
- VOLTAGE-FEEDBACK
- Voltage Gain :
- 110dB
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Mounting Type :
- Through Hole
- Operating Supply Voltage :
- 8V
- Radiation Hardening :
- No
- Package / Case :
- 8-DIP (0.300, 7.62mm)
- RoHS Status :
- ROHS3 Compliant
- Bandwidth :
- 2.4MHz
- Low-Offset :
- No
- Supply Voltage :
- 5V
- Unity Gain BW-Nom :
- 3000 kHz
- Output Current :
- 16mA
- Output Current per Channel :
- 16mA
- Operating Supply Current :
- 750µA
- Terminal Pitch :
- 2.54mm
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Low-Bias :
- yes
- Programmable Power :
- No
- Pbfree Code :
- yes
- ECCN Code :
- EAR99
- Output Type :
- Rail-to-Rail
- Max I/O Voltage :
- 4.5mV
- Lifecycle Status :
- ACTIVE (Last Updated: 2 days ago)
- Common Mode Rejection Ratio :
- 50 dB
- Average Bias Current-Max (IIB) :
- 0.00006μA
- Max Frequency :
- 21kHz
- Number of Pins :
- 8
- REACH SVHC :
- No SVHC
- Terminal Position :
- Dual
- Input Offset Voltage (Vos) :
- 4.5mV
- Datasheets
- TLV2371IP

1 Channels 16mA per Channel 1pA 50 dB Instrumentational OP Amps 0.00006μA 8V 2.7V~16V ±1.35V~8V TLV2371 8 Pins 8-DIP (0.300, 7.62mm)
TLV2371IP Overview
Packaging for the buffer amplifier is in the form of a 8-DIP (0.300, 7.62mm) case. A General Purpose-type buffer amplifier is shown here. There is a Tube case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 4.5mV. For this electrical component, the recommended mounting type is Through Hole, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 750μA , this buffer op amp will be able to operate. Keeping the voltage gain at 110dB is the best course of action. 1 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 8V.
TLV2371IP Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
TLV2371IP Applications
There are a lot of Texas Instruments
TLV2371IP Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















