TLV2371IDR
- Mfr.Part #
- TLV2371IDR
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 4,763
- In Stock :
- 4,763
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Unity Gain BW-Nom :
- 3000 kHz
- ECCN Code :
- EAR99
- Length :
- 4.9mm
- Number of Terminations :
- 8
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Voltage - Input Offset :
- 2mV
- Frequency Compensation :
- yes
- Number of Channels :
- 1
- Voltage - Supply, Single/Dual (±) :
- 2.7V~16V ±1.35V~8V
- Output Type :
- Rail-to-Rail
- Power Dissipation :
- 710mW
- JESD-609 Code :
- e4
- Pin Count :
- 8
- Pbfree Code :
- yes
- Supply Voltage :
- 5V
- Micropower :
- No
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Operating Temperature :
- -40°C~125°C
- Number of Pins :
- 8
- Lifecycle Status :
- ACTIVE (Last Updated: 3 days ago)
- Voltage Gain :
- 110dB
- Operating Supply Current :
- 750µA
- Average Bias Current-Max (IIB) :
- 0.00006μA
- Base Part Number :
- TLV2371
- Surface Mount :
- yes
- Low-Offset :
- No
- Output Current :
- 16mA
- Operating Supply Voltage :
- 8V
- Terminal Position :
- Dual
- Input Offset Voltage (Vos) :
- 4.5mV
- Nominal Gain Bandwidth Product :
- 3MHz
- Radiation Hardening :
- No
- RoHS Status :
- ROHS3 Compliant
- Terminal Form :
- Gull wing
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Lead Free :
- Lead Free
- REACH SVHC :
- No SVHC
- Factory Lead Time :
- 6 Weeks
- Slew Rate :
- 2.1V/μs
- Programmable Power :
- No
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Nominal Supply Current :
- 900μA
- Architecture :
- VOLTAGE-FEEDBACK
- Number of Functions :
- 1
- Current - Input Bias :
- 1pA
- Output Current per Channel :
- 16mA
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Mounting Type :
- Surface Mount
- Height :
- 1.75mm
- Max I/O Voltage :
- 4.5mV
- Packing Method :
- TR
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Width :
- 3.91mm
- Low-Bias :
- yes
- Bandwidth :
- 2.4MHz
- Packaging :
- Cut Tape (CT)
- Common Mode Rejection Ratio :
- 50 dB
- Peak Reflow Temperature (Cel) :
- 260
- Amplifier Type :
- GENERAL PURPOSE
- Thickness :
- 1.58mm
- Datasheets
- TLV2371IDR

1 Channels 16mA per Channel 1pA 50 dB Instrumentational OP Amps 0.00006μA 8V 2.7V~16V ±1.35V~8V TLV2371 8 Pins 8-SOIC (0.154, 3.90mm Width)
TLV2371IDR Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Cut Tape (CT) case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 4.5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 750μA volt supply current is needed for this linear amplifier to operate. Voltage gain should remain at 110dB. There are 1 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 8V. The instrumentation amplifier is packed in the form of TR.
TLV2371IDR Features
8 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
TLV2371IDR Applications
There are a lot of Texas Instruments
TLV2371IDR Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















