TLV2262IPW
Or copy the link below:
- Mfr.Part #
- TLV2262IPW
- Manufacturer
- Texas Instruments
- Package / Case
- 8-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC CMOS 2 CIRCUIT 8TSSOP
- Stock
- 3,179
- In Stock ：
- 3,179
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Output Type :
- Rail-to-Rail
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Terminal Position :
- Dual
- Packaging :
- Tube
- Height :
- 1.2mm
- Length :
- 3mm
- Number of Pins :
- 8
- Bandwidth :
- 670 kHz
- Gain Bandwidth Product :
- 710kHz
- Output Current :
- 50mA
- Operating Supply Current :
- 400μA
- Operating Temperature :
- -40°C~125°C
- Number of Terminations :
- 8
- Supply Voltage Limit-Max :
- 16V
- Pin Count :
- 8
- Input Offset Voltage (Vos) :
- 2.5mV
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Programmable Power :
- No
- Dual Supply Voltage :
- 3V
- Base Part Number :
- TLV2262
- Low-Offset :
- No
- RoHS Status :
- ROHS3 Compliant
- Surface Mount :
- yes
- Width :
- 4.4mm
- JESD-609 Code :
- e4
- Unity Gain BW-Nom :
- 710 kHz
- Voltage - Supply, Single/Dual (±) :
- 2.7V~8V ±1.35V~4V
- Radiation Hardening :
- No
- Peak Reflow Temperature (Cel) :
- 260
- Package / Case :
- 8-TSSOP (0.173, 4.40mm Width)
- Voltage Gain :
- 114.81dB
- Low-Bias :
- yes
- Number of Functions :
- 2
- Voltage - Input Offset :
- 300µV
- Slew Rate :
- 0.55V/µs
- Power Dissipation :
- 525mW
- Common Mode Rejection Ratio :
- 65 dB
- Frequency Compensation :
- yes
- Supply Voltage :
- 3V
- Architecture :
- VOLTAGE-FEEDBACK
- Max I/O Voltage :
- 2.5mV
- Output Current per Channel :
- 50mA
- Current - Input Bias :
- 1pA
- Micropower :
- yes
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Mounting Type :
- Surface Mount
- Nominal Supply Current :
- 500μA
- Amplifier Type :
- GENERAL PURPOSE
- Lifecycle Status :
- ACTIVE (Last Updated: 1 day ago)
- Pbfree Code :
- yes
- ECCN Code :
- EAR99
- Factory Lead Time :
- 6 Weeks
- Terminal Pitch :
- 0.65mm
- Thickness :
- 1mm
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Series :
- LinCMOS™
- Terminal Form :
- Gull wing
- Operating Supply Voltage :
- 4V
- Lead Free :
- Lead Free
- Number of Elements :
- 2
- Datasheets
- TLV2262IPW
50mA per Channel 1pA 65 dB Instrumentational OP Amps 4V 2.7V~8V ±1.35V~4V TLV2262 8 Pins 8-TSSOP (0.173, 4.40mm Width)
TLV2262IPW Overview
There is a 8-TSSOP (0.173, 4.40mm Width) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called General Purpose-types. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 3V at all times, so please keep that in mind when using it. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 2.5mV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of -40°C~125°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 400μA . 114.81dB should be the voltage gain. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. There are 2 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 4V. The LinCMOS™ represents the op amp's series number.
TLV2262IPW Features
8 Pins
supply voltage of 3V
114.81dB voltage gain
Output Type: Rail-to-Rail
TLV2262IPW Applications
There are a lot of Texas Instruments
TLV2262IPW Instrumentational OP Amps applications.
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
