TLV2211CDBVR
- Mfr.Part #
- TLV2211CDBVR
- Manufacturer
- Texas Instruments
- Package / Case
- SC-74A, SOT-753
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT SOT23-5
- Stock
- 37,109
- In Stock :
- 37,109
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Pin Count :
- 5
- Packing Method :
- TR
- Number of Terminations :
- 5
- Operating Supply Current :
- 13μA
- Factory Lead Time :
- 6 Weeks
- ECCN Code :
- EAR99
- Operating Temperature :
- 0°C~70°C
- Thickness :
- 1.2mm
- JESD-609 Code :
- e4
- Terminal Form :
- Gull wing
- Frequency Compensation :
- yes
- Surface Mount :
- yes
- Height :
- 1.45mm
- Output Current :
- 50mA
- Lead Free :
- Lead Free
- Unity Gain BW-Nom :
- 65 kHz
- Average Bias Current-Max (IIB) :
- 0.00006μA
- Output Current per Channel :
- 50mA
- Input Offset Current-Max (IIO) :
- 0.00006μA
- Voltage Gain :
- 118.06dB
- Base Part Number :
- TLV2211
- Number of Pins :
- 5
- Mounting Type :
- Surface Mount
- Common Mode Rejection Ratio :
- 65 dB
- Supply Voltage :
- 3V
- REACH SVHC :
- No SVHC
- Radiation Hardening :
- No
- Output Type :
- Rail-to-Rail
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Number of Channels :
- 1
- Low-Offset :
- No
- Bias Current-Max (IIB) @25C :
- 0.00006μA
- Voltage - Input Offset :
- 450µV
- Bandwidth :
- 56 kHz
- Max I/O Voltage :
- 3mV
- Length :
- 2.9mm
- Operating Supply Voltage :
- 5V
- Slew Rate :
- 0.025V/μs
- Width :
- 1.6mm
- Series :
- LinCMOS™
- Packaging :
- Cut Tape (CT)
- Micropower :
- yes
- Nominal Supply Current :
- 25μA
- Input Offset Voltage (Vos) :
- 3mV
- Peak Reflow Temperature (Cel) :
- 260
- Current - Input Bias :
- 1pA
- Architecture :
- VOLTAGE-FEEDBACK
- Programmable Power :
- No
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Power Dissipation :
- 150mW
- Dual Supply Voltage :
- 3V
- RoHS Status :
- ROHS3 Compliant
- Number of Functions :
- 1
- Terminal Position :
- Dual
- Amplifier Type :
- GENERAL PURPOSE
- Package / Case :
- SC-74A, SOT-753
- Gain Bandwidth Product :
- 65kHz
- Lifecycle Status :
- ACTIVE (Last Updated: 5 days ago)
- Voltage - Supply, Single/Dual (±) :
- 2.7V~10V ±1.35V~5V
- Pbfree Code :
- yes
- Low-Bias :
- yes
- Datasheets
- TLV2211CDBVR

1 Channels 50mA per Channel 1pA 65 dB Instrumentational OP Amps 0.00006μA 5V 2.7V~10V ±1.35V~5V TLV2211 5 Pins SC-74A, SOT-753
TLV2211CDBVR Overview
In order to protect the op amps, a SC-74A, SOT-753 case is used. There are two types of operational amplifiers in this circuit. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 5. It consists of a total of 5 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 3V battery. It has 5 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 3mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 13μA and 10 . Maintain 118.06dB as the voltage gain. Buffer op amp is equipped with 1 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 5V. As a result of this, the buffer amplifier is packed in TR. LinCMOS™ is the number that corresponds to the series of the buffer op amp.
TLV2211CDBVR Features
5 Pins
supply voltage of 3V
118.06dB voltage gain
Output Type: Rail-to-Rail
TLV2211CDBVR Applications
There are a lot of Texas Instruments
TLV2211CDBVR Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















