TLE2082ACDRG4
- Mfr.Part #
- TLE2082ACDRG4
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP JFET 2 CIRCUIT 8SOIC
- Stock
- 1
- In Stock :
- 1
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Factory Lead Time :
- 6 Weeks
- Unity Gain BW-Nom :
- 10000 kHz
- Thickness :
- 1.58mm
- Common Mode Rejection Ratio :
- 70 dB
- Amplifier Type :
- J-FET
- ECCN Code :
- EAR99
- Lead Free :
- Lead Free
- Programmable Power :
- No
- Mounting Type :
- Surface Mount
- Base Part Number :
- TLE2082
- Pin Count :
- 8
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Supply Voltage :
- 5V
- Number of Pins :
- 8
- Width :
- 3.91mm
- Low-Bias :
- yes
- Average Bias Current-Max (IIB) :
- 0.000175μA
- Voltage - Supply, Single/Dual (±) :
- 4.5V~38V ±2.25V~19V
- Voltage Gain :
- 106dB
- Surface Mount :
- yes
- Max I/O Voltage :
- 4mV
- Nominal Supply Current :
- 3.9mA
- Number of Terminations :
- 8
- Bias Current-Max (IIB) @25C :
- 0.000175μA
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Frequency Compensation :
- yes
- Input Offset Voltage (Vos) :
- 700µV
- Micropower :
- No
- Power :
- No
- Slew Rate :
- 45V/µs
- Operating Temperature :
- 0°C~70°C
- Peak Reflow Temperature (Cel) :
- 260
- Power Supplies :
- +-5/+-15V
- Terminal Form :
- Gull wing
- Current - Input Bias :
- 20pA
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- RoHS Status :
- ROHS3 Compliant
- Terminal Position :
- Dual
- Output Current :
- 48mA
- Bandwidth :
- 9.4MHz
- Low-Offset :
- No
- Series :
- Excalibur™
- Gain Bandwidth Product :
- 10MHz
- Operating Supply Voltage :
- 19V
- Length :
- 4.9mm
- Lifecycle Status :
- ACTIVE (Last Updated: 3 days ago)
- Input Offset Current-Max (IIO) :
- 0.00035μA
- Radiation Hardening :
- No
- Pbfree Code :
- yes
- Architecture :
- VOLTAGE-FEEDBACK
- Height :
- 1.75mm
- Packing Method :
- TR
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Nominal Gain Bandwidth Product :
- 9.4MHz
- Packaging :
- Tape and Reel (TR)
- Output Current per Channel :
- 48mA
- Number of Functions :
- 2
- Number of Circuits :
- 2
- Operating Supply Current :
- 3.1mA
- JESD-609 Code :
- e4
- Datasheets
- TLE2082ACDRG4

48mA per Channel 20pA 70 dB Instrumentational OP Amps 0.000175μA 19V 4.5V~38V ±2.25V~19V TLE2082 8 Pins 8-SOIC (0.154, 3.90mm Width)
TLE2082ACDRG4 Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 700μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 3.1mA and 10 . Maintain 106dB as the voltage gain. In total, there are 2 circuits on this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 19V. As a result of this, the buffer amplifier is packed in TR. Excalibur™ is the number that corresponds to the series of the buffer op amp.
TLE2082ACDRG4 Features
8 Pins
supply voltage of 5V
106dB voltage gain
TLE2082ACDRG4 Applications
There are a lot of Texas Instruments
TLE2082ACDRG4 Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















