TLC070AIPE4
- Mfr.Part #
- TLC070AIPE4
- Manufacturer
- Texas Instruments
- Package / Case
- PDIP
- Datasheet
- Download
- Description
- IC CMOS 1 CIRCUIT 8DIP
- Stock
- 590
- In Stock :
- 590
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Width :
- 6.35mm
- Packing Method :
- Tube
- Operating Supply Voltage :
- 8V
- Low-Bias :
- yes
- Gain Bandwidth Product :
- 10MHz
- Number of Channels :
- 1
- Supply Voltage :
- 5V
- Power :
- No
- Lead Free :
- Lead Free
- Bias Current-Max (IIB) @25C :
- 0.00005μA
- Max Operating Temperature :
- 125°C
- JESD-609 Code :
- e4
- Common Mode Rejection Ratio :
- 80 dB
- Thickness :
- 3.9mm
- Pin Count :
- 8
- Output Current per Channel :
- 57mA
- Bandwidth :
- 10MHz
- Voltage Gain :
- 120dB
- Input Offset Current-Max (IIO) :
- 0.00005μA
- Max Dual Supply Voltage :
- 8V
- Nominal Gain Bandwidth Product :
- 10MHz
- Number of Pins :
- 8
- Unity Gain BW-Nom :
- 10000 kHz
- Number of Terminations :
- 8
- Current - Output :
- 57mA
- Surface Mount :
- No
- Micropower :
- No
- Slew Rate :
- 16 V/µs
- Low-Offset :
- No
- Length :
- 9.81mm
- Min Operating Temperature :
- -40°C
- Operating Supply Current :
- 2.1mA
- Average Bias Current-Max (IIB) :
- 0.0007μA
- Height :
- 5.08mm
- Package / Case :
- PDIP
- Lifecycle Status :
- ACTIVE (Last Updated: 1 day ago)
- Input Offset Voltage (Vos) :
- 390μV
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Terminal Pitch :
- 2.54mm
- Current - Input Bias :
- 50pA
- Amplifier Type :
- Operational Amplifier
- Terminal Form :
- THROUGH-HOLE
- RoHS Status :
- RoHS Compliant
- Min Dual Supply Voltage :
- 2.25V
- Programmable Power :
- No
- Terminal Position :
- Dual
- ECCN Code :
- EAR99
- Temperature Grade :
- Automotive
- Frequency Compensation :
- yes
- Min Supply Voltage :
- 4.5V
- Nominal Supply Current :
- 2.9mA
- Max Supply Voltage :
- 16V
- Radiation Hardening :
- No
- Architecture :
- VOLTAGE-FEEDBACK
- Number of Functions :
- 1
- Max I/O Voltage :
- 1.4mV
- Pbfree Code :
- yes
- Datasheets
- TLC070AIPE4

1 Channels 57mA per Channel 50pA 80 dB Instrumentational OP Amps 0.0007μA 8V 8 Pins PDIP
TLC070AIPE4 Overview
In the package, you will find a PDIP-case to contain the op amp ic. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 390μV as input offset voltage. Using an 2.1mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 120dB for the time being. On the buffer amps, there are 1 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 125°C should not be used for the operation of buffer amplifier. The operating supply voltage of the buffer op amp is rated at 8V. The linear amplifier is packaged by using a TUBE axis. This electric component can work from a voltage of under 16V as far as supply voltage is concerned. A voltage of 4.5V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 8V volts when you conduct this part.
TLC070AIPE4 Features
8 Pins
supply voltage of 5V
120dB voltage gain
TLC070AIPE4 Applications
There are a lot of Texas Instruments
TLC070AIPE4 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















