THS4503IDGN
Or copy the link below:
- Mfr.Part #
- THS4503IDGN
- Manufacturer
- Texas Instruments
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP DIFF 1 CIRCUIT 8HVSSOP
- Stock
- 17,974
- In Stock ：
- 17,974
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Output Current per Channel :
- 120mA
- Peak Reflow Temperature (Cel) :
- 260
- Input Offset Current-Max (IIO) :
- 2µA
- Pin Count :
- 8
- Unity Gain BW-Nom :
- 300000 kHz
- Number of Elements :
- 1
- Operating Temperature :
- -40°C~85°C
- Lifecycle Status :
- ACTIVE (Last Updated: 6 days ago)
- Bandwidth :
- 370MHz
- Resistance :
- 25kOhm
- Length :
- 3mm
- Packing Method :
- TR
- Operating Supply Current :
- 23mA
- Base Part Number :
- THS4503
- Thickness :
- 1.02mm
- Average Bias Current-Max (IIB) :
- 5.2μA
- Dual Supply Voltage :
- 5V
- Power Dissipation :
- 1.71W
- ECCN Code :
- EAR99
- -3db Bandwidth :
- 30MHz
- Amplifier Type :
- Differential
- RoHS Status :
- ROHS3 Compliant
- Input Offset Voltage (Vos) :
- 1mV
- Terminal Pitch :
- 0.65mm
- Qualification Status :
- Not Qualified
- Low-Bias :
- No
- Mounting Type :
- Surface Mount
- Max I/O Voltage :
- -4mV
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Pbfree Code :
- yes
- Current - Input Bias :
- 4μA
- Terminal Form :
- Gull wing
- Time@Peak Reflow Temperature-Max (s) :
- NOT SPECIFIED
- Voltage Gain :
- 54dB
- Width :
- 3mm
- Packaging :
- Tape and Reel (TR)
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Bias Current-Max (IIB) @25C :
- 4.6µA
- Terminal Position :
- Dual
- Architecture :
- VOLTAGE-FEEDBACK
- Micropower :
- No
- Slew Rate :
- 2800V/μs
- Nominal Supply Current :
- 28mA
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
- Factory Lead Time :
- 6 Weeks
- Number of Pins :
- 8
- Max Input Voltage :
- -1.3V
- Height :
- 1.1mm
- Number of Terminations :
- 8
- JESD-609 Code :
- e4
- Max Power Dissipation :
- 1.71W
- Surface Mount :
- yes
- Programmable Power :
- No
- Settling Time :
- 6.3 ns
- Common Mode Rejection Ratio :
- 74 dB
- Gain Bandwidth Product :
- 300MHz
- Voltage - Supply, Single/Dual (±) :
- 4.5V~15V ±2.25V~7.5V
- Number of Functions :
- 1
- Weight :
- 24.408939mg
- Frequency Compensation :
- yes
- Power Supply Rejection Ratio (PSRR) :
- 72dB
- Lead Free :
- Lead Free
- Low-Offset :
- No
- Supply Voltage :
- 5V
- Datasheets
- THS4503IDGN
120mA per Channel 4μA 74 dB Instrumentational OP Amps 5.2μA 4.5V~15V ±2.25V~7.5V THS4503 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
THS4503IDGNR Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case. A Differential-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 1mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using a supply current of 23mA , this buffer op amp will be able to operate. 54dB should be the voltage gain. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. A TR-shaped amplifier is used to pack the buffer amps. It is recommended to keep the instrumentation amplifier resistance within the range of 25kOhm.
THS4503IDGNR Features
8 Pins
supply voltage of 5V
54dB voltage gain
Resistance of 25kOhm
THS4503IDGNR Applications
There are a lot of Texas Instruments
THS4503IDGNR Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
