THS4502CDGN
- Mfr.Part #
- THS4502CDGN
- Manufacturer
- Texas Instruments
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP DIFF 1 CIRCUIT 8HVSSOP
- Stock
- 6,483
- In Stock :
- 6,483
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Packaging :
- Tube
- Base Part Number :
- THS4502
- Micropower :
- No
- Settling Time :
- 6.3 ns
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Length :
- 3mm
- Low-Bias :
- No
- Bandwidth :
- 370MHz
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Slew Rate :
- 2800V/μs
- Number of Pins :
- 8
- Peak Reflow Temperature (Cel) :
- 260
- Lifecycle Status :
- ACTIVE (Last Updated: 2 days ago)
- Bias Current-Max (IIB) @25C :
- 4.6µA
- Dual Supply Voltage :
- 5V
- Gain Bandwidth Product :
- 300MHz
- Power Dissipation :
- 1.71W
- Operating Supply Current :
- 23mA
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
- Pin Count :
- 8
- Voltage - Input Offset :
- 1mV
- Height :
- 1.1mm
- -3db Bandwidth :
- 30MHz
- Max I/O Voltage :
- -4mV
- Factory Lead Time :
- 8 Weeks
- Supply Voltage :
- 5V
- RoHS Status :
- ROHS3 Compliant
- Voltage Gain :
- 54dB
- Max Input Voltage :
- -1.3V
- Mounting Type :
- Surface Mount
- Resistance :
- 50kOhm
- Input Offset Current-Max (IIO) :
- 2µA
- Nominal Supply Current :
- 28mA
- Operating Supply Voltage :
- 5V
- Number of Functions :
- 1
- Terminal Form :
- Gull wing
- JESD-609 Code :
- e4
- Number of Elements :
- 1
- Lead Free :
- Lead Free
- ECCN Code :
- EAR99
- Unity Gain BW-Nom :
- 300000 kHz
- Terminal Position :
- Dual
- Voltage - Supply, Single/Dual (±) :
- 4.5V~15V ±2.25V~7.5V
- Input Offset Voltage (Vos) :
- 2.4mV
- Radiation Hardening :
- No
- Max Power Dissipation :
- 1.71W
- Frequency Compensation :
- yes
- Output Current per Channel :
- 120mA
- Programmable Power :
- No
- Power Supply Rejection Ratio (PSRR) :
- 72dB
- Pbfree Code :
- yes
- Common Mode Rejection Ratio :
- 74 dB
- Current - Input Bias :
- 4μA
- Operating Temperature :
- 0°C~70°C
- Thickness :
- 1.02mm
- Amplifier Type :
- Differential
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Weight :
- 24.408939mg
- Average Bias Current-Max (IIB) :
- 5μA
- Low-Offset :
- No
- Width :
- 3mm
- Surface Mount :
- yes
- Number of Terminations :
- 8
- Terminal Pitch :
- 0.65mm
- Architecture :
- VOLTAGE-FEEDBACK
- Datasheets
- THS4502CDGN

120mA per Channel 4μA 74 dB Instrumentational OP Amps 5μA 5V 4.5V~15V ±2.25V~7.5V THS4502 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
THS4502CDGN Overview
In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 2.4mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than 0°C~70°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 23mA and 10 . Maintain 54dB as the voltage gain. As a whole, there are 1 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. It is important to keep the resistance within the 50kOhm range of the op amps.
THS4502CDGN Features
8 Pins
supply voltage of 5V
54dB voltage gain
Resistance of 50kOhm
THS4502CDGN Applications
There are a lot of Texas Instruments
THS4502CDGN Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















