THS4151ID
Or copy the link below:
- Mfr.Part #
- THS4151ID
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP DIFF 1 CIRCUIT 8SOIC
- Stock
- 1,169
- In Stock ：
- 1,169
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Width :
- 3.91mm
- Unity Gain BW-Nom :
- 150000 kHz
- RoHS Status :
- ROHS3 Compliant
- Factory Lead Time :
- 6 Weeks
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Pin Count :
- 8
- Slew Rate :
- 650V/μs
- Terminal Form :
- Gull wing
- Number of Channels :
- 1
- Output Current per Channel :
- 85mA
- Number of Functions :
- 1
- Operating Supply Current :
- 17.5mA
- Mounting Type :
- Surface Mount
- Neg Supply Voltage-Nom (Vsup) :
- -15V
- Operating Temperature :
- -40°C~85°C
- Supply Voltage :
- 15V
- Frequency Compensation :
- yes
- Surface Mount :
- yes
- Max Power Dissipation :
- 1.02W
- Input Offset Voltage (Vos) :
- 7mV
- Architecture :
- VOLTAGE-FEEDBACK
- Nominal Supply Current :
- 21mA
- Thickness :
- 1.58mm
- Gain Bandwidth Product :
- 340MHz
- Common Mode Rejection Ratio :
- 75 dB
- -3db Bandwidth :
- 80MHz
- Packaging :
- Tube
- Voltage - Input Offset :
- 1.1mV
- Low-Bias :
- No
- ECCN Code :
- EAR99
- Qualification Status :
- Not Qualified
- Base Part Number :
- THS4151
- Terminal Pitch :
- 0.65mm
- Pbfree Code :
- yes
- Voltage - Supply, Single/Dual (±) :
- 4V~33V ±2V~16.5V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Contact Plating :
- Gold
- Terminal Position :
- Dual
- Time@Peak Reflow Temperature-Max (s) :
- NOT SPECIFIED
- Dual Supply Voltage :
- 15V
- Max I/O Voltage :
- 7mV
- Resistance :
- 14.4MOhm
- Programmable Power :
- No
- Weight :
- 75.891673mg
- Current - Input Bias :
- 4.3μA
- Peak Reflow Temperature (Cel) :
- 260
- Amplifier Type :
- Differential
- REACH SVHC :
- No SVHC
- Lead Free :
- Lead Free
- Micropower :
- No
- Operating Supply Voltage :
- 30V
- Number of Pins :
- 8
- Low-Offset :
- No
- Bandwidth :
- 150MHz
- Settling Time :
- 53 ns
- Power Dissipation :
- 1.02W
- Lifecycle Status :
- ACTIVE (Last Updated: 5 days ago)
- Length :
- 4.9mm
- Voltage Gain :
- 67dB
- Number of Terminations :
- 8
- Height :
- 1.75mm
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- JESD-609 Code :
- e4
- Datasheets
- THS4151ID
1 Channels 85mA per Channel 4.3μA 75 dB Instrumentational OP Amps 30V 4V~33V ±2V~16.5V THS4151 8 Pins 8-SOIC (0.154, 3.90mm Width)
THS4151ID Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 7mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 17.5mA and 10 . Maintain 67dB as the voltage gain. Buffer op amp is equipped with 1 channels on the device. The operating supply voltage of the buffer op amp is rated at 30V. It is important to keep the resistance within the 14.4MOhm range of the op amps.
THS4151ID Features
8 Pins
supply voltage of 15V
67dB voltage gain
Resistance of 14.4MOhm
THS4151ID Applications
There are a lot of Texas Instruments
THS4151ID Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
