THS4150IDGNR
- Mfr.Part #
- THS4150IDGNR
- Manufacturer
- Texas Instruments
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP DIFF 1 CIRCUIT 8HVSSOP
- Stock
- 10,150
- In Stock :
- 10,150
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Micropower :
- No
- Packaging :
- Cut Tape (CT)
- Amplifier Type :
- Differential
- JESD-609 Code :
- e4
- Voltage - Input Offset :
- 1.1mV
- Supply Voltage :
- 5V
- Terminal Pitch :
- 0.65mm
- Settling Time :
- 53 ns
- Nominal Supply Current :
- 21mA
- Voltage Gain :
- 67dB
- Terminal Form :
- Gull wing
- Surface Mount :
- yes
- Frequency Compensation :
- yes
- Pin Count :
- 8
- ECCN Code :
- EAR99
- Width :
- 3mm
- Peak Reflow Temperature (Cel) :
- 260
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Number of Functions :
- 1
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Output Current per Channel :
- 85mA
- Current - Input Bias :
- 4.3μA
- Operating Supply Current :
- 17.5mA
- Gain Bandwidth Product :
- 340MHz
- Low-Offset :
- No
- Number of Pins :
- 8
- Max I/O Voltage :
- 7mV
- Number of Terminations :
- 8
- Voltage - Supply, Single/Dual (±) :
- 4V~33V ±2V~16.5V
- Thickness :
- 1.02mm
- Dual Supply Voltage :
- 15V
- Weight :
- 24.408939mg
- Common Mode Rejection Ratio :
- 75 dB
- -3db Bandwidth :
- 80MHz
- Pbfree Code :
- yes
- Bandwidth :
- 150MHz
- Factory Lead Time :
- 6 Weeks
- Programmable Power :
- No
- Operating Temperature :
- -40°C~85°C
- Mounting Type :
- Surface Mount
- Max Power Dissipation :
- 1.07W
- Time@Peak Reflow Temperature-Max (s) :
- NOT SPECIFIED
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- Low-Bias :
- No
- Lead Free :
- Lead Free
- Length :
- 3mm
- Lifecycle Status :
- ACTIVE (Last Updated: 6 days ago)
- Architecture :
- VOLTAGE-FEEDBACK
- RoHS Status :
- ROHS3 Compliant
- Packing Method :
- TR
- Height :
- 1.1mm
- Unity Gain BW-Nom :
- 150000 kHz
- Number of Elements :
- 1
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
- Power Dissipation :
- 1.07W
- Qualification Status :
- Not Qualified
- Base Part Number :
- THS4150
- Resistance :
- 14.4MOhm
- Slew Rate :
- 650V/μs
- Input Offset Voltage (Vos) :
- 7mV
- Terminal Position :
- Dual
- Datasheets
- THS4150IDGNR

85mA per Channel 4.3μA 75 dB Instrumentational OP Amps 4V~33V ±2V~16.5V THS4150 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
THS4150IDGNR Overview
In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case is used. There are two types of operational amplifiers in this circuit. In the case of Cut Tape (CT) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 7mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 17.5mA and 10 . Maintain 67dB as the voltage gain. As a whole, there are 1 elements that make up this buffer amplifier. As a result of this, the buffer amplifier is packed in TR. It is important to keep the resistance within the 14.4MOhm range of the op amps.
THS4150IDGNR Features
8 Pins
supply voltage of 5V
67dB voltage gain
Resistance of 14.4MOhm
THS4150IDGNR Applications
There are a lot of Texas Instruments
THS4150IDGNR Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















