THS4131CDGKR
Or copy the link below:
- Mfr.Part #
- THS4131CDGKR
- Manufacturer
- Texas Instruments
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP DIFF 1 CIRCUIT 8VSSOP
- Stock
- 2,599
- In Stock ：
- 2,599
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Low-Offset :
- No
- JESD-609 Code :
- e4
- Number of Functions :
- 1
- Voltage Gain :
- 78dB
- Output Current per Channel :
- 85mA
- Factory Lead Time :
- 6 Weeks
- Dual Supply Voltage :
- 15V
- Time@Peak Reflow Temperature-Max (s) :
- NOT SPECIFIED
- Slew Rate :
- 52V/μs
- Input Offset Voltage (Vos) :
- 2mV
- -3db Bandwidth :
- 80MHz
- Voltage - Input Offset :
- 200μV
- Lead Free :
- Lead Free
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Height :
- 1.07mm
- Programmable Power :
- No
- Weight :
- 23.303308mg
- Lifecycle Status :
- ACTIVE (Last Updated: 4 days ago)
- Bandwidth :
- 150MHz
- Pbfree Code :
- yes
- Current - Input Bias :
- 2µA
- Number of Pins :
- 8
- Peak Reflow Temperature (Cel) :
- 260
- Thickness :
- 970μm
- Resistance :
- 34mOhm
- Frequency Compensation :
- yes
- Amplifier Type :
- Differential
- Number of Terminations :
- 8
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Common Mode Rejection Ratio :
- 80 dB
- Power Dissipation :
- 385mW
- ECCN Code :
- EAR99
- Packaging :
- Tape and Reel (TR)
- RoHS Status :
- ROHS3 Compliant
- Input Offset Current-Max (IIO) :
- 0.5μA
- Operating Supply Voltage :
- 15V
- Gain Bandwidth Product :
- 225MHz
- Bias Current-Max (IIB) @25C :
- 6µA
- Number of Elements :
- 1
- Terminal Pitch :
- 0.65mm
- Terminal Position :
- Dual
- Surface Mount :
- yes
- Max Input Voltage :
- -700mV
- Base Part Number :
- THS4131
- Qualification Status :
- Not Qualified
- Low-Bias :
- No
- Unity Gain BW-Nom :
- 170000 kHz
- Mounting Type :
- Surface Mount
- Average Bias Current-Max (IIB) :
- 6µA
- Max Power Dissipation :
- 385mW
- Settling Time :
- 78 ns
- Voltage - Supply, Single/Dual (±) :
- 4V~33V ±2V~16.5V
- Operating Temperature :
- 0°C~70°C
- Architecture :
- VOLTAGE-FEEDBACK
- Pin Count :
- 8
- Packing Method :
- TR
- Min Input Voltage :
- 1.23V
- Power Supply Rejection Ratio (PSRR) :
- 73dB
- Nominal Supply Current :
- 15mA
- Width :
- 3mm
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Terminal Form :
- Gull wing
- Supply Voltage :
- 5V
- Operating Supply Current :
- 12.3mA
- Micropower :
- No
- Length :
- 3mm
- Max I/O Voltage :
- 2mV
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheets
- THS4131CDGKR
85mA per Channel 2μA 80 dB Instrumentational OP Amps 6μA 15V 4V~33V ±2V~16.5V THS4131 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
THS4131CDGKR Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a Differential-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 2mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. A supply current of 12.3mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 78dB. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 15V. An buffer amplifier is packed in a TR-shape according to the design. It is important that the op amp resistance stays within the range of 34MOhm.
THS4131CDGKR Features
8 Pins
supply voltage of 5V
78dB voltage gain
Resistance of 34MOhm
THS4131CDGKR Applications
There are a lot of Texas Instruments
THS4131CDGKR Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
