THS4130IDGKR
Or copy the link below:
- Mfr.Part #
- THS4130IDGKR
- Manufacturer
- Texas Instruments
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP DIFF 1 CIRCUIT 8VSSOP
- Stock
- 4,485
- In Stock ：
- 4,485
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Power Dissipation :
- 385mW
- Terminal Form :
- Gull wing
- Max Input Voltage :
- -700mV
- Min Input Voltage :
- 1.23V
- Operating Supply Voltage :
- 15V
- Thickness :
- 970μm
- Length :
- 3mm
- Peak Reflow Temperature (Cel) :
- 260
- Terminal Position :
- Dual
- Unity Gain BW-Nom :
- 170000 kHz
- Amplifier Type :
- Differential
- Factory Lead Time :
- 6 Weeks
- RoHS Status :
- ROHS3 Compliant
- Pbfree Code :
- yes
- -3db Bandwidth :
- 80MHz
- Current - Input Bias :
- 2µA
- Supply Voltage :
- 5V
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Bandwidth :
- 150MHz
- Number of Pins :
- 8
- Low-Offset :
- No
- Power Supply Rejection Ratio (PSRR) :
- 73dB
- Pin Count :
- 8
- Surface Mount :
- yes
- Resistance :
- 34mOhm
- Output Current per Channel :
- 85mA
- Slew Rate :
- 52V/μs
- Lead Free :
- Lead Free
- Voltage - Supply, Single/Dual (±) :
- 4V~33V ±2V~16.5V
- Voltage - Input Offset :
- 200μV
- Number of Terminations :
- 8
- Bias Current-Max (IIB) @25C :
- 6µA
- Input Offset Current-Max (IIO) :
- 0.5μA
- Max I/O Voltage :
- 2mV
- Average Bias Current-Max (IIB) :
- 6µA
- Operating Temperature :
- -40°C~85°C
- Width :
- 3mm
- Operating Supply Current :
- 12.3mA
- Max Power Dissipation :
- 385mW
- Time@Peak Reflow Temperature-Max (s) :
- NOT SPECIFIED
- Packing Method :
- TR
- Packaging :
- Tape and Reel (TR)
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Weight :
- 23.303308mg
- Micropower :
- No
- Mounting Type :
- Surface Mount
- Input Offset Voltage (Vos) :
- 2mV
- JESD-609 Code :
- e4
- Terminal Pitch :
- 0.65mm
- Lifecycle Status :
- ACTIVE (Last Updated: 1 week ago)
- Height :
- 1.07mm
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- ECCN Code :
- EAR99
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Voltage Gain :
- 78dB
- Settling Time :
- 78 ns
- Nominal Supply Current :
- 15mA
- Number of Elements :
- 1
- Qualification Status :
- Not Qualified
- Number of Functions :
- 1
- Frequency Compensation :
- yes
- Common Mode Rejection Ratio :
- 80 dB
- Base Part Number :
- THS4130
- Programmable Power :
- No
- Low-Bias :
- No
- Dual Supply Voltage :
- 15V
- Architecture :
- VOLTAGE-FEEDBACK
- Gain Bandwidth Product :
- 225MHz
- Datasheets
- THS4130IDGKR
85mA per Channel 2μA 80 dB Instrumentational OP Amps 6μA 15V 4V~33V ±2V~16.5V THS4130 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
THS4130IDGKR Overview
There is a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the Differential-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. 8 pins are located on the operational amplifiers. The input offset voltage is 2mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 12.3mA . It is recommended to keep the voltage gain at 78dB at all times. The total number of elements in this buffer amplifier is 1. The operating supply voltage of the buffer op amp is rated at 15V. This linear amplifier pack is based on the TR axis. In order for the op amp resistance to remain within the 34MOhm range, the op amp should be tested.
THS4130IDGKR Features
8 Pins
supply voltage of 5V
78dB voltage gain
Resistance of 34MOhm
THS4130IDGKR Applications
There are a lot of Texas Instruments
THS4130IDGKR Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
