THS4130ID
Or copy the link below:
- Mfr.Part #
- THS4130ID
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP DIFF 1 CIRCUIT 8SOIC
- Stock
- 1
- In Stock ：
- 1
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Pbfree Code :
- yes
- Power Dissipation :
- 1.02W
- Supply Voltage :
- 5V
- Voltage - Input Offset :
- 200μV
- Power Supply Rejection Ratio (PSRR) :
- 73dB
- Number of Pins :
- 8
- Thickness :
- 1.58mm
- Dual Supply Voltage :
- 15V
- Surface Mount :
- yes
- Output Current per Channel :
- 85mA
- Width :
- 3.91mm
- Lead Free :
- Lead Free
- Max Input Voltage :
- -700mV
- Input Offset Voltage (Vos) :
- 2mV
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- ECCN Code :
- EAR99
- Min Input Voltage :
- 1.23V
- Number of Channels :
- 1
- Max Power Dissipation :
- 1.02W
- Number of Terminations :
- 8
- Peak Reflow Temperature (Cel) :
- 260
- Common Mode Rejection Ratio :
- 80 dB
- Mounting Type :
- Surface Mount
- Settling Time :
- 78 ns
- Terminal Form :
- Gull wing
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Operating Supply Current :
- 12.3mA
- -3db Bandwidth :
- 80MHz
- Operating Temperature :
- -40°C~85°C
- Low-Bias :
- No
- Bias Current-Max (IIB) @25C :
- 6µA
- RoHS Status :
- ROHS3 Compliant
- Voltage - Supply, Single/Dual (±) :
- 4V~33V ±2V~16.5V
- Number of Functions :
- 1
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Terminal Position :
- Dual
- Radiation Hardening :
- No
- Weight :
- 75.891673mg
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Height :
- 1.75mm
- Lifecycle Status :
- ACTIVE (Last Updated: 3 days ago)
- Packaging :
- Tube
- Micropower :
- No
- Max I/O Voltage :
- 2mV
- Programmable Power :
- No
- Low-Offset :
- No
- Pin Count :
- 8
- Amplifier Type :
- Differential
- Input Offset Current-Max (IIO) :
- 0.5μA
- Length :
- 4.9mm
- Architecture :
- VOLTAGE-FEEDBACK
- Base Part Number :
- THS4130
- Gain Bandwidth Product :
- 225MHz
- Current - Input Bias :
- 2µA
- Slew Rate :
- 52V/μs
- Average Bias Current-Max (IIB) :
- 6µA
- Nominal Supply Current :
- 15mA
- Resistance :
- 34mOhm
- REACH SVHC :
- No SVHC
- Bandwidth :
- 150MHz
- Factory Lead Time :
- 6 Weeks
- Frequency Compensation :
- yes
- JESD-609 Code :
- e4
- Voltage Gain :
- 78dB
- Operating Supply Voltage :
- 5V
- Unity Gain BW-Nom :
- 170000 kHz
- Datasheets
- THS4130ID
THS4130ID Documents
1 Channels 85mA per Channel 2μA 80 dB Instrumentational OP Amps 6μA 5V 4V~33V ±2V~16.5V THS4130 8 Pins 8-SOIC (0.154, 3.90mm Width)
THS4130ID Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Differential-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 2mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . An 12.3mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 1 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 5V. 34MOhm should be the range of resistance for the linear amplifier.
THS4130ID Features
8 Pins
supply voltage of 5V
78dB voltage gain
Resistance of 34MOhm
THS4130ID Applications
There are a lot of Texas Instruments
THS4130ID Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
