THS4130CDGNRG4
Or copy the link below:
- Mfr.Part #
- THS4130CDGNRG4
- Manufacturer
- Texas Instruments
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP DIFF 1 CIRCUIT 8HVSSOP
- Stock
- 14,768
- In Stock ：
- 14,768
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Bandwidth :
- 150MHz
- Dual Supply Voltage :
- 15V
- Input Offset Current-Max (IIO) :
- 0.5μA
- Power Dissipation :
- 1.71W
- Terminal Form :
- Gull wing
- Terminal Position :
- Dual
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Unity Gain BW-Nom :
- 170000 kHz
- Voltage Gain :
- 78dB
- Mounting Type :
- Surface Mount
- Number of Functions :
- 1
- Nominal Supply Current :
- 15mA
- Settling Time :
- 78 ns
- Min Input Voltage :
- 1.23V
- Gain Bandwidth Product :
- 225MHz
- Peak Reflow Temperature (Cel) :
- 260
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Current - Input Bias :
- 2µA
- RoHS Status :
- ROHS3 Compliant
- Surface Mount :
- yes
- Number of Pins :
- 8
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
- Input Offset Voltage (Vos) :
- 2mV
- Low-Bias :
- No
- Operating Supply Current :
- 14mA
- Slew Rate :
- 52V/μs
- Max I/O Voltage :
- 2mV
- Weight :
- 24.408939mg
- Lifecycle Status :
- ACTIVE (Last Updated: 6 days ago)
- Amplifier Type :
- Differential
- Pin Count :
- 8
- Time@Peak Reflow Temperature-Max (s) :
- NOT SPECIFIED
- Bias Current-Max (IIB) @25C :
- 6µA
- Power Supply Rejection Ratio (PSRR) :
- 73dB
- Micropower :
- No
- Common Mode Rejection Ratio :
- 80 dB
- Number of Elements :
- 1
- Packaging :
- Tape and Reel (TR)
- Max Power Dissipation :
- 1.71W
- Thickness :
- 1.02mm
- ECCN Code :
- EAR99
- Operating Temperature :
- 0°C~70°C
- JESD-609 Code :
- e4
- Output Current per Channel :
- 85mA
- Supply Voltage :
- 5V
- Terminal Pitch :
- 0.65mm
- Architecture :
- VOLTAGE-FEEDBACK
- Voltage - Supply, Single/Dual (±) :
- 5V~30V ±2.5V~15V
- Programmable Power :
- No
- Max Input Voltage :
- -700mV
- Height :
- 1.1mm
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Factory Lead Time :
- 6 Weeks
- Frequency Compensation :
- yes
- -3db Bandwidth :
- 80MHz
- Length :
- 3mm
- Pbfree Code :
- yes
- Qualification Status :
- Not Qualified
- Lead Free :
- Lead Free
- Width :
- 3mm
- Resistance :
- 34mOhm
- Average Bias Current-Max (IIB) :
- 6µA
- Low-Offset :
- No
- Voltage - Input Offset :
- 200μV
- Packing Method :
- TR
- Base Part Number :
- THS4130
- Operating Supply Voltage :
- 15V
- Number of Terminations :
- 8
- Datasheets
- THS4130CDGNRG4
85mA per Channel 2μA 80 dB Instrumentational OP Amps 6μA 15V 5V~30V ±2.5V~15V THS4130 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
THS4130CDGNRG4 Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad case is used to package the op amp. Differential-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 2mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . An 14mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are a total of 1 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 15V. The instrumentation amplifier is packed in the form of TR. 34MOhm should be the range of resistance for the linear amplifier.
THS4130CDGNRG4 Features
8 Pins
supply voltage of 5V
78dB voltage gain
Resistance of 34MOhm
THS4130CDGNRG4 Applications
There are a lot of Texas Instruments
THS4130CDGNRG4 Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
