THS4130CDG4
Or copy the link below:
- Mfr.Part #
- THS4130CDG4
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP DIFF 1 CIRCUIT 8SOIC
- Stock
- 16,552
- In Stock ：
- 16,552
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Operating Supply Current :
- 14mA
- Peak Reflow Temperature (Cel) :
- 260
- Width :
- 3.91mm
- Micropower :
- No
- ECCN Code :
- EAR99
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Number of Functions :
- 1
- Operating Supply Voltage :
- 5V
- Factory Lead Time :
- 6 Weeks
- Height :
- 1.75mm
- Packaging :
- Tube
- JESD-609 Code :
- e4
- Voltage Gain :
- 78dB
- Low-Bias :
- No
- Number of Pins :
- 8
- Output Current per Channel :
- 85mA
- Voltage - Input Offset :
- 200μV
- Input Offset Current-Max (IIO) :
- 0.5μA
- Pbfree Code :
- yes
- Supply Voltage :
- 5V
- Thickness :
- 1.58mm
- Power Dissipation :
- 1.02W
- Number of Elements :
- 1
- Base Part Number :
- THS4130
- Radiation Hardening :
- No
- Programmable Power :
- No
- Bandwidth :
- 150MHz
- Pin Count :
- 8
- Operating Temperature :
- 0°C~70°C
- Max Input Voltage :
- -700mV
- Max Power Dissipation :
- 1.02W
- Low-Offset :
- No
- Nominal Supply Current :
- 15mA
- Min Input Voltage :
- 1.23V
- Terminal Position :
- Dual
- Average Bias Current-Max (IIB) :
- 6µA
- RoHS Status :
- ROHS3 Compliant
- Amplifier Type :
- Differential
- Resistance :
- 34mOhm
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Current - Input Bias :
- 2µA
- Lead Free :
- Lead Free
- Dual Supply Voltage :
- 15V
- Voltage - Supply, Single/Dual (±) :
- 5V~30V ±2.5V~15V
- Length :
- 4.9mm
- Mounting Type :
- Surface Mount
- Unity Gain BW-Nom :
- 170000 kHz
- Frequency Compensation :
- yes
- Max I/O Voltage :
- 2mV
- Weight :
- 75.891673mg
- Number of Terminations :
- 8
- Common Mode Rejection Ratio :
- 80 dB
- Input Offset Voltage (Vos) :
- 2mV
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Architecture :
- VOLTAGE-FEEDBACK
- Gain Bandwidth Product :
- 225MHz
- Terminal Form :
- Gull wing
- Lifecycle Status :
- ACTIVE (Last Updated: 1 week ago)
- Settling Time :
- 78 ns
- Power Supply Rejection Ratio (PSRR) :
- 73dB
- Slew Rate :
- 52V/μs
- -3db Bandwidth :
- 80MHz
- Bias Current-Max (IIB) @25C :
- 6µA
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Surface Mount :
- yes
- Datasheets
- THS4130CDG4
85mA per Channel 2μA 80 dB Instrumentational OP Amps 6μA 5V 5V~30V ±2.5V~15V THS4130 8 Pins 8-SOIC (0.154, 3.90mm Width)
THS4130CDG4 Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Differential-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 2mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . An 14mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are a total of 1 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5V. 34MOhm should be the range of resistance for the linear amplifier.
THS4130CDG4 Features
8 Pins
supply voltage of 5V
78dB voltage gain
Resistance of 34MOhm
THS4130CDG4 Applications
There are a lot of Texas Instruments
THS4130CDG4 Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
