TC7652CPD
- Mfr.Part #
- TC7652CPD
- Manufacturer
- Microchip Technology
- Package / Case
- 14-DIP (0.300, 7.62mm)
- Datasheet
- Download
- Description
- IC OPAMP ZERO-DRIFT 1 CIRC 14DIP
- Stock
- 2,239
- In Stock :
- 2,239
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Pin Count :
- 14
- Programmable Power :
- No
- Published :
- 1998
- Series :
- --
- Frequency Compensation :
- yes
- Operating Temperature :
- 0°C~70°C
- Supplier Device Package :
- 14-PDIP
- Shutdown :
- No Shutdown
- Number of Functions :
- 1
- Voltage - Input Offset :
- 2mV
- Output Type :
- --
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Current - Input Bias :
- 30pA
- Brand :
- Microchip Technology
- Min Operating Temperature :
- 0 °C
- RoHS :
- Compliant
- Supply Type :
- Single, Dual
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Height :
- 4.06mm
- Slew Rate :
- 1V/μs
- Bandwidth :
- 400 kHz
- Manufacturer :
- Microchip
- Number of Amplifiers :
- 2
- Max Frequency :
- 550Hz
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Package / Case :
- 14-DIP (0.300, 7.62mm)
- Micropower :
- No
- Number of Channels :
- 1
- Gain Bandwidth Product :
- 400kHz
- Supply Voltage :
- 5V
- Terminal Position :
- Dual
- Max Operating Temperature :
- 70 °C
- Voltage - Supply, Single/Dual (±) :
- 5V~16V ±2.5V~8V
- Voltage Gain :
- 150dB
- Mounting :
- Through Hole
- Common Mode Rejection Ratio :
- 120 dB
- Amplifier Type :
- Zero-Drift
- Mounting Style :
- Through Hole
- Product Status :
- Active
- Unity Gain BW-Nom :
- 400 kHz
- Product Type :
- Op Amps - Operational Amplifiers
- Architecture :
- CHOPPER-STAB
- Resistance :
- 1 TΩ
- Product :
- Operational Amplifiers
- ECCN Code :
- EAR99
- RoHS Status :
- ROHS3 Compliant
- REACH SVHC :
- No SVHC
- Min Dual Supply Voltage :
- 2.5 V
- Operating Supply Current :
- 1mA
- Maximum Operating Temperature :
- + 70 C
- Package :
- Tube
- Output Current per Channel :
- -
- Terminal Finish :
- Matte Tin (Sn)
- Base Part Number :
- TC7652
- Supplier Package :
- PDIP
- Number of Circuits :
- 1
- Mounting Type :
- Through Hole
- Base Product Number :
- TC7652
- Radiation Hardening :
- No
- Product Category :
- Operational Amplifiers - Op Amps
- Dual Supply Voltage :
- +/- 3 V, +/- 5 V
- Pbfree Code :
- yes
- Nominal Supply Current :
- 3mA
- Max Supply Voltage :
- 16 V
- Power Dissipation :
- 800mW
- Input Bias Current :
- 100 pA
- Minimum Operating Temperature :
- 0 C
- Input Offset Voltage (Vos) :
- 5µV
- Power Supply Rejection Ratio (PSRR) :
- 120dB
- Number of Pins :
- 14
- Power Supply Type :
- Dual
- Current - Supply :
- 1mA
- Power Supplies :
- +-5V
- Width :
- 6.6mm
- Factory Lead Time :
- 6 Weeks
- Number of Elements :
- 2
- JESD-609 Code :
- e3
- Low-Bias :
- yes
- Low-Offset :
- yes
- Supply Voltage Limit-Max :
- 9V
- Lead Free :
- Lead Free
- Max Dual Supply Voltage :
- 8 V
- Packaging :
- Tube
- Operating Supply Voltage :
- 8V
- Mount :
- Through Hole
- Length :
- 19.56mm
- Number of Channels per Chip :
- 1
- Voltage Gain dB :
- 150 dB
- Type :
- Chopper Stabilization
- Datasheets
- TC7652CPD

1 Channels - per Channel 30pA 120 dB Instrumentational OP Amps 8V 5V~16V ±2.5V~8V TC7652 14 Pins 14-DIP (0.300, 7.62mm)
TC7652CPD Overview
It is packaged in an 14-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. An op amp of this type is a Zero-Drift-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. A total of 14 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 5μV for input offset voltage. This electronic part is recommended for mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. A supply current of 1mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 150dB. This op amp ic has 1 circuits. There are a total of 1 channels available on the op amps. One of its many advantages is that buffer op amp outputs -- signals. This instrumentation amplifier cannot operate below 0 °C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 70 °C. There are 2 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 8V. For optimal performance, this electrical part should be connected to a supply with a current of 1mA. It is important to keep in mind that the power supply voltage of this electric component is below 16 V, which is suitable. In order to conduct this part, you will need to provide dual supply voltages of 8 V volts. Buffer op amp series numbers are indicated by the --. It is important that the op amp resistance stays within the range of 1 TΩ. The linear amplifier has 2 amplifiers.
TC7652CPD Features
14 Pins
supply voltage of 5V
150dB voltage gain
Output Type: --
Resistance of 1 TΩ
TC7652CPD Applications
There are a lot of Microchip Technology
TC7652CPD Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















