TC1034ECTTR
- Mfr.Part #
- TC1034ECTTR
- Manufacturer
- Microchip Technology
- Package / Case
- SC-74A, SOT-753
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT SOT23-5
- Stock
- 22,407
- In Stock :
- 22,407
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Input Offset Voltage (Vos) :
- 100μV
- Base Part Number :
- TC1034
- Micropower :
- yes
- Operating Supply Current :
- 6µA
- Series :
- -
- Product Status :
- Obsolete
- Peak Reflow Temperature (Cel) :
- 260
- Supplier Device Package :
- SOT-23-5
- Pin Count :
- 5
- JESD-609 Code :
- e3
- Number of Terminations :
- 5
- Terminal Form :
- Gull wing
- Base Product Number :
- TC1034
- Number of Circuits :
- 1
- Power Supply Rejection Ratio (PSRR) :
- 80dB
- Current - Output / Channel :
- 4 mA
- Slew Rate :
- 0.035V/µs
- Amplifier Type :
- GENERAL PURPOSE
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Supply Current-Max :
- 0.008mA
- Current - Input Bias :
- 50pA
- Max Supply Voltage :
- 5.5 V
- Operating Temperature :
- -40°C~85°C
- Qualification Status :
- Not Qualified
- Package / Case :
- SC-74A, SOT-753
- Mounting Type :
- Surface Mount
- Mount :
- Surface Mount
- Min Supply Voltage :
- 1.8 V
- Common Mode Rejection Ratio :
- 70 dB
- Output Current per Channel :
- 4mA
- Packing Method :
- Tape and Reel
- Low-Offset :
- No
- Operating Supply Voltage :
- 5V
- Current - Supply :
- 6µA
- Wideband :
- No
- ECCN Code :
- EAR99
- Number of Pins :
- 5
- Low-Bias :
- yes
- Input Bias Current :
- 100 pA
- Unity Gain BW-Nom :
- 90 kHz
- Voltage Gain :
- 100dB
- Max Operating Temperature :
- 85 °C
- Output Type :
- Rail-to-Rail
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Voltage - Supply, Single/Dual (±) :
- 1.8V~5.5V
- Number of Channels :
- 2
- Architecture :
- VOLTAGE-FEEDBACK
- Lead Free :
- Lead Free
- Time@Peak Reflow Temperature-Max (s) :
- NOT SPECIFIED
- Number of Functions :
- 1
- Reach Compliance Code :
- Unknown
- Frequency Compensation :
- yes
- Terminal Position :
- Dual
- Min Operating Temperature :
- -40 °C
- Gain Bandwidth Product :
- 90kHz
- RoHS Status :
- ROHS3 Compliant
- Programmable Power :
- No
- Supply Voltage Limit-Max :
- 6V
- Supply Voltage :
- 3V
- Voltage - Input Offset :
- 100 µV
- Terminal Finish :
- Matte Tin (Sn)
- Packaging :
- Cut Tape (CT)
- Published :
- 2002
- RoHS :
- Compliant
- Number of Elements :
- 1
- Datasheets
- TC1034ECTTR

2 Channels 4mA per Channel 50pA 70 dB Instrumentational OP Amps 5V 1.8V~5.5V TC1034 5 Pins SC-74A, SOT-753
TC1034ECTTR Overview
There is a SC-74A, SOT-753 case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Cut Tape (CT) case. We are approaching the 5h termination of the year. In total, there are 5 pins on this op amp ic. This linear amplifier should be powered by an 3V battery. 5 pins are located on the operational amplifiers. The input offset voltage is 100μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . The buffer amplifier is capable of operating from a supply current of 6μA . It is recommended to keep the voltage gain at 100dB at all times. This op amp contains 1 circuits. On the buffer amps, there are 2 channels that can be used. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. For this linear amplifier to work, the temperature should not be below -40 °C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 85 °C. The total number of elements in this buffer amplifier is 1. The operating supply voltage of the buffer op amp is rated at 5V. This linear amplifier pack is based on the TAPE AND REEL axis. It is recommended that you use an 6µA power supply with this electrical part in order for it to operate correctly. Under 5.5 V is the minimum supply voltage for this electric component. Over 1.8 V is a recommended supply voltage for buffer ampsInstrumentation amplifiers are numbered by their - series.
TC1034ECTTR Features
5 Pins
supply voltage of 3V
100dB voltage gain
Output Type: Rail-to-Rail
TC1034ECTTR Applications
There are a lot of Microchip Technology
TC1034ECTTR Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















