OPA2348AIDCNT
Or copy the link below:
- Mfr.Part #
- OPA2348AIDCNT
- Manufacturer
- Texas Instruments
- Package / Case
- SOT-23-8
- Datasheet
- Download
- Description
- IC CMOS 2 CIRCUIT SOT23-8
- Stock
- 134,047
- In Stock ：
- 134,047
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Length :
- 2.9mm
- Current - Input Bias :
- 0.5pA
- REACH SVHC :
- No SVHC
- Number of Circuits :
- 2
- Max Operating Temperature :
- 125°C
- Packaging :
- Cut Tape (CT)
- Factory Lead Time :
- 6 Weeks
- Common Mode Rejection Ratio :
- 70 dB
- Voltage - Input Offset :
- 1mV
- Operating Supply Current :
- 45µA
- Number of Elements :
- 2
- Supplier Device Package :
- SOT-23-8
- Current - Output / Channel :
- 10mA
- Output Current per Channel :
- 10mA
- Voltage - Supply, Single/Dual (±) :
- 2.1V~5.5V
- Base Part Number :
- OPA2348
- Output Current :
- 10mA
- Number of Pins :
- 8
- Nominal Gain Bandwidth Product :
- 1MHz
- Max I/O Voltage :
- 5mV
- Number of Amplifiers :
- 2
- Power Supply Rejection Ratio (PSRR) :
- 84.44dB
- Mounting Type :
- Surface Mount
- Package / Case :
- SOT-23-8
- Min Operating Temperature :
- -40°C
- Lifecycle Status :
- ACTIVE (Last Updated: 4 days ago)
- Output Type :
- Rail-to-Rail
- Height :
- 1.45mm
- Thickness :
- 1.1mm
- Number of Channels :
- 2
- Radiation Hardening :
- No
- Current - Supply :
- 45µA
- Min Supply Voltage :
- 2.5V
- Amplifier Type :
- GENERAL PURPOSE
- Max Supply Voltage :
- 5.5V
- Slew Rate :
- 0.5V/μs
- Voltage Gain :
- 108dB
- Nominal Supply Current :
- 65μA
- Width :
- 1.63mm
- Bandwidth :
- 1MHz
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Operating Temperature :
- -40°C~125°C
- Gain Bandwidth Product :
- 1MHz
- Lead Free :
- Lead Free
- RoHS Status :
- ROHS3 Compliant
- Input Offset Voltage (Vos) :
- 5mV
- Datasheets
- OPA2348AIDCNT
2 Channels 10mA per Channel 0.5pA 70 dB Instrumentational OP Amps 2.1V~5.5V OPA2348 SOT-23-8
OPA2348AIDCNT Overview
A SOT-23-8 case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Cut Tape (CT) case. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 45μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On this instrumentation amplifier, there are 2 circuits that are connected together. There are 2 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 125°C. There are a total of 2 elements in this linear amplifier. As a recommendation, this electronic component should be used with a power supply that can deliver 45μA. I would like to point out that this electrical component is capable of working from a voltage below 5.5V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2.5V at all times. In total, there are 2 op amps on the device.
OPA2348AIDCNT Features
108dB voltage gain
Output Type: Rail-to-Rail
OPA2348AIDCNT Applications
There are a lot of Texas Instruments
OPA2348AIDCNT Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
Manufacturer related products
Catalog related products
Related products
- Follow Us
-
- Payment
-
- Subscribe
- Certification
-
-
