OPA141AIDGKR
- Mfr.Part #
- OPA141AIDGKR
- Manufacturer
- Texas Instruments
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP JFET 1 CIRCUIT 8VSSOP
- Stock
- 7,421
- In Stock :
- 7,421
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Low-Offset :
- No
- Packing Method :
- TR
- Slew Rate :
- 20V/µs
- Voltage - Supply, Single/Dual (±) :
- 4.5V~36V ±2.25V~18V
- Input Offset Voltage (Vos) :
- 3.5mV
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Wideband :
- No
- Supply Voltage :
- 18V
- Output Current per Channel :
- 36mA
- Output Current :
- 36mA
- Height :
- 1.07mm
- Pin Count :
- 8
- Power Supply Rejection Ratio (PSRR) :
- 137.07dB
- Terminal Form :
- Gull wing
- Moisture Sensitivity Level (MSL) :
- 2 (1 Year)
- Thickness :
- 970μm
- Radiation Hardening :
- No
- Number of Elements :
- 1
- Mounting Type :
- Surface Mount
- Number of Terminations :
- 8
- Operating Temperature :
- -40°C~125°C
- Frequency Compensation :
- yes
- Lead Free :
- Lead Free
- Number of Pins :
- 8
- Low-Bias :
- yes
- RoHS Status :
- ROHS3 Compliant
- Neg Supply Voltage-Nom (Vsup) :
- -18V
- Base Part Number :
- OPA141
- Supply Voltage Limit-Max :
- 20V
- Surface Mount :
- yes
- Factory Lead Time :
- 6 Weeks
- Nominal Gain Bandwidth Product :
- 10MHz
- JESD-609 Code :
- e4
- Micropower :
- No
- Nominal Supply Current :
- 2.3mA
- Packaging :
- Tape and Reel (TR)
- Current - Input Bias :
- 2pA
- Operating Supply Current :
- 1.8mA
- ECCN Code :
- EAR99
- Number of Functions :
- 1
- Terminal Pitch :
- 0.65mm
- Amplifier Type :
- J-FET
- Terminal Position :
- Dual
- Bias Current-Max (IIB) @25C :
- 0.00002μA
- Voltage - Input Offset :
- 1mV
- Output Type :
- Rail-to-Rail
- Unity Gain BW-Nom :
- 10000 kHz
- Programmable Power :
- No
- Lifecycle Status :
- ACTIVE (Last Updated: 5 days ago)
- Common Mode Rejection Ratio :
- 120 dB
- Peak Reflow Temperature (Cel) :
- 260
- Architecture :
- VOLTAGE-FEEDBACK
- Pbfree Code :
- yes
- Length :
- 3mm
- Voltage Gain :
- 126dB
- Width :
- 3mm
- Average Bias Current-Max (IIB) :
- 0.00002μA
- Max I/O Voltage :
- 3.5mV
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Operating Supply Voltage :
- 18V
- Datasheets
- OPA141AIDGKR

36mA per Channel 2pA 120 dB Instrumentational OP Amps 0.00002μA 18V 4.5V~36V ±2.25V~18V OPA141 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
OPA141AIDGKR Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a J-FET-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 18V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 3.5mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 1.8mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 126dB. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. There are 1 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 18V. An buffer amplifier is packed in a TR-shape according to the design.
OPA141AIDGKR Features
8 Pins
supply voltage of 18V
126dB voltage gain
Output Type: Rail-to-Rail
OPA141AIDGKR Applications
There are a lot of Texas Instruments
OPA141AIDGKR Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















