OPA124UAG4
- Mfr.Part #
- OPA124UAG4
- Manufacturer
- Texas Instruments
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 1
- In Stock :
- 1
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Texas Instruments
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Operating Temperature :
- -25°C~85°C
- Peak Reflow Temperature (Cel) :
- 260
- Operating Supply Voltage :
- 18V
- Slew Rate :
- 1.6V/µs
- Thickness :
- 1.58mm
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Series :
- Difet®
- Micropower :
- No
- Voltage - Input Offset :
- 150μV
- Power Dissipation :
- 750mW
- Voltage Gain :
- 125dB
- Nominal Gain Bandwidth Product :
- 1.5MHz
- Nominal Supply Current :
- 3.5mA
- Radiation Hardening :
- No
- Amplifier Type :
- GENERAL PURPOSE
- Pin Count :
- 8
- Average Bias Current-Max (IIB) :
- 0.000002μA
- Lead Free :
- Lead Free
- Number of Pins :
- 8
- Operating Supply Current :
- 2.5mA
- Architecture :
- VOLTAGE-FEEDBACK
- Height :
- 1.75mm
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Input Offset Voltage (Vos) :
- 500μV
- Base Part Number :
- OPA124
- Bandwidth :
- 1.5MHz
- Frequency Compensation :
- yes
- REACH SVHC :
- Unknown
- Bias Current-Max (IIB) @25C :
- 0.000002μA
- Terminal Form :
- Gull wing
- Output Current per Channel :
- 10mA
- Supply Voltage :
- 15V
- Neg Supply Voltage-Nom (Vsup) :
- -15V
- Programmable Power :
- No
- Max I/O Voltage :
- 500μV
- Moisture Sensitivity Level (MSL) :
- 3 (168 Hours)
- Number of Terminations :
- 8
- Surface Mount :
- yes
- Current - Input Bias :
- 0.5pA
- Mounting Type :
- Surface Mount
- Output Current :
- 10mA
- Voltage - Supply, Single/Dual (±) :
- 10V~36V ±5V~18V
- Length :
- 4.9mm
- RoHS Status :
- ROHS3 Compliant
- Terminal Position :
- Dual
- ECCN Code :
- EAR99
- Lifecycle Status :
- LIFEBUY (Last Updated: 4 days ago)
- Common Mode Rejection Ratio :
- 94 dB
- Packaging :
- Tube
- Pbfree Code :
- yes
- Width :
- 3.91mm
- Number of Channels :
- 1
- Low-Offset :
- yes
- Low-Bias :
- yes
- Dual Supply Voltage :
- 15V
- JESD-609 Code :
- e4
- Unity Gain BW-Nom :
- 1500 kHz
- Number of Functions :
- 1
- Datasheets
- OPA124UAG4

1 Channels 10mA per Channel 0.5pA 94 dB Instrumentational OP Amps 0.000002μA 18V 10V~36V ±5V~18V OPA124 8 Pins 8-SOIC (0.154, 3.90mm Width)
OPA124UAG4 Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 500μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -25°C~85°C . An 2.5mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 1 channels on the operational amplifiers. The operating supply voltage of the buffer op amp is rated at 18V. The Difet® indicates the series number of the op amp.
OPA124UAG4 Features
8 Pins
supply voltage of 15V
125dB voltage gain
OPA124UAG4 Applications
There are a lot of Texas Instruments
OPA124UAG4 Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















