OP281GSZ
- Mfr.Part #
- OP281GSZ
- Manufacturer
- Analog Devices, Inc.
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 20,344
- In Stock :
- 20,344
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Analog Devices, Inc.
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Height :
- 1.5mm
- Input Offset Voltage (Vos) :
- 1.5mV
- Slew Rate :
- 0.028V/μs
- Low-Bias :
- No
- Terminal Form :
- Gull wing
- Frequency Compensation :
- yes
- Number of Channels :
- 2
- JESD-609 Code :
- e3
- Terminal Finish :
- Matte Tin (Sn)
- Output Current per Channel :
- 12mA
- Voltage Gain :
- 83.52dB
- Length :
- 5mm
- Architecture :
- VOLTAGE-FEEDBACK
- Radiation Hardening :
- No
- Pin Count :
- 8
- Operating Temperature :
- -40°C~85°C
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Supply Voltage :
- 5V
- Surface Mount :
- yes
- Packaging :
- Tube
- Low-Offset :
- No
- Dual Supply Voltage :
- 5V
- REACH SVHC :
- No SVHC
- Mounting Type :
- Surface Mount
- Quiescent Current :
- 5μA
- Factory Lead Time :
- 8 Weeks
- Lead Free :
- Contains Lead
- Output Type :
- Rail-to-Rail
- Power Supply Rejection Ratio (PSRR) :
- 95dB
- Number of Pins :
- 8
- Bandwidth :
- 105 kHz
- Pbfree Code :
- No
- Supply Voltage Limit-Max :
- 8V
- Terminal Position :
- Dual
- Amplifier Type :
- GENERAL PURPOSE
- RoHS Status :
- ROHS3 Compliant
- Number of Terminations :
- 8
- Lifecycle Status :
- Production (Last Updated: 3 weeks ago)
- Neg Supply Voltage-Nom (Vsup) :
- -5V
- Peak Reflow Temperature (Cel) :
- 260
- Base Part Number :
- OP281
- Voltage - Supply, Single/Dual (±) :
- 2.7V~12V ±1.35V~6V
- Operating Supply Current :
- 3.3μA
- Programmable Power :
- No
- Nominal Supply Current :
- 8μA
- Unity Gain BW-Nom :
- 105 kHz
- Voltage - Input Offset :
- 100μV
- Number of Functions :
- 2
- Operating Supply Voltage :
- 5V
- Current - Input Bias :
- 3nA
- Average Bias Current-Max (IIB) :
- 0.01μA
- Time@Peak Reflow Temperature-Max (s) :
- 30
- ECCN Code :
- EAR99
- Width :
- 4mm
- Micropower :
- yes
- Common Mode Rejection Ratio :
- 95 dB
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Datasheets
- OP281GSZ
OP281GSZ Documents

2 Channels 12mA per Channel 3nA 95 dB Instrumentational OP Amps 0.01μA 5V 2.7V~12V ±1.35V~6V OP281 8 Pins 8-SOIC (0.154, 3.90mm Width)
OP281GSZ Overview
In order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 1.5mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 3.3μA and 10 . Maintain 83.52dB as the voltage gain. Buffer op amp is equipped with 2 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of the buffer op amp is rated at 5V. There is an 5μA quiescent current in linear amplifier.
OP281GSZ Features
8 Pins
supply voltage of 5V
83.52dB voltage gain
Output Type: Rail-to-Rail
OP281GSZ Applications
There are a lot of Analog Devices Inc.
OP281GSZ Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















