MCP6V07T-E/SN
- Mfr.Part #
- MCP6V07T-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP ZERO-DRIFT 2 CIRC 8SOIC
- Stock
- 6,468
- In Stock :
- 6,468
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Power Supplies :
- 2/5 V
- JESD-30 Code :
- R-PDSO-G8
- Qualification :
- AEC-Q100
- Reach Compliance Code :
- Compliant
- Mount :
- Surface Mount
- Shutdown :
- No Shutdown
- Terminal Pitch :
- 1.27 mm
- Frequency Compensation :
- yes
- Base Product Number :
- MCP6V07
- Low-Bias :
- yes
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Voltage Gain :
- 158dB
- Operating Supply Current :
- 300μA
- Radiation Hardening :
- No
- Input Offset Voltage (Vos) :
- 3μV
- Power Supply Rejection Ratio (PSRR) :
- 125dB
- Number of Terminations :
- 8
- Number of Channels per Chip :
- 2
- Peak Reflow Temperature (Cel) :
- 260
- Mounting :
- Surface Mount
- Published :
- 2008
- Supply Voltage Limit-Max :
- 6.5V
- Manufacturer :
- Microchip
- Mounting Type :
- Surface Mount
- Output Current :
- 22mA
- Lead Free :
- Lead Free
- Number of Pins :
- 8
- Operating Supply Voltage :
- 2.2, 5.5 V
- Input Bias Current :
- 6 pA
- Maximum Operating Temperature :
- + 125 C
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Micropower :
- yes
- Mounting Style :
- SMD/SMT
- Supply Current-Max :
- 0.8 mA
- Output Type :
- Rail-to-Rail
- Operating Temperature :
- -40°C~125°C
- Type :
- General Purpose Amplifier
- ECCN Code :
- EAR99
- Min Operating Temperature :
- -40 °C
- Output Current per Channel :
- 22mA
- Product Status :
- Active
- Pin Count :
- 8
- Terminal Position :
- Dual
- Length :
- 4.9mm
- Factory Lead Time :
- 8 Weeks
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Min Supply Voltage :
- 1.8 V
- Number of Channels :
- 2 Channel
- Brand :
- Microchip Technology
- Voltage Gain dB :
- 158 dB
- JESD-609 Code :
- e3
- Amplifier Type :
- Zero-Drift
- Product Category :
- Operational Amplifiers - Op Amps
- Current - Supply :
- 300μA
- Base Part Number :
- MCP6V07
- Supply Type :
- Single
- Gain Bandwidth Product :
- 1.3MHz
- Common Mode Rejection Ratio :
- 120 dB
- Number of Terminals :
- 8
- RoHS :
- Details
- Qualification Status :
- Not Qualified
- Voltage - Supply, Single/Dual (±) :
- 1.8V~5.5V
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Number of Circuits :
- 2
- Pbfree Code :
- yes
- Temperature Grade :
- Automotive
- Minimum Operating Temperature :
- - 40 C
- Unity Gain BW-Nom :
- 1300 kHz
- Current - Input Bias :
- 6pA
- Nominal Supply Current :
- 300μA
- Low-Offset :
- yes
- Width :
- 3.9 mm
- Architecture :
- VOLTAGE-FEEDBACK
- Max Operating Temperature :
- 125 °C
- Packaging :
- Tape and Reel (TR)
- Voltage - Input Offset :
- 3μV
- HTS Code :
- 8542.33.00.01
- Packing Method :
- Tape and Reel
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Surface Mount :
- yes
- Package :
- Tape and Reel (TR)
- Input Offset Voltage-Max :
- 3 µV
- Seated Height-Max :
- 1.75 mm
- Screening Level :
- Extended
- Series :
- --
- Slew Rate :
- 0.5V/μs
- Number of Functions :
- 2
- Product :
- Operational Amplifiers
- Current - Output / Channel :
- 22 mA
- RoHS Status :
- ROHS3 Compliant
- Supplier Device Package :
- 8-SOIC
- Max Supply Voltage :
- 5.5 V
- Average Bias Current-Max (IIB) :
- 0.005μA
- Maximum Operating Supply Voltage :
- 5.5 V
- Height Seated (Max) :
- 1.75mm
- Product Type :
- Op Amps - Operational Amplifiers
- Height :
- 1.25 mm (Min)
- Terminal Form :
- Gull wing
- Supplier Package :
- SOIC N
- Number of Elements :
- 2
- Package Shape :
- RECTANGULAR
- Voltage Gain-Min :
- 1778000
- Supply Voltage :
- 1.8V
- Datasheets
- MCP6V07T-E/SN

2 Channel Channels 22mA per Channel 6pA 120 dB Instrumentational OP Amps 0.005μA 2.2, 5.5 V 1.8V~5.5V MCP6V07 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6V07T-E/SN Overview
A 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Zero-Drift-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 1.8V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 3μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 300μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On this instrumentation amplifier, there are 2 circuits that are connected together. There are 2 Channel channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. In order for op amp to function properly, the temperature should not be lower than -40 °C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 125 °C. There are a total of 2 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 2.2, 5.5 V. The instrumentation amplifier is packed in the form of TAPE AND REEL. As a recommendation, this electronic component should be used with a power supply that can deliver 300µA. I would like to point out that this electrical component is capable of working from a voltage below 5.5 V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 1.8 V at all times. The -- indicates the series number of the op amp. There is a minimum voltage gain of 1778000 that this buffer op amp is capable of conducting. In order to connect the buffer amplifier to the wires, it is equipped with 8 terminals.
MCP6V07T-E/SN Features
8 Pins
supply voltage of 1.8V
158dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6V07T-E/SN Applications
There are a lot of Microchip Technology
MCP6V07T-E/SN Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















