MCP6V01-E/SN
- Mfr.Part #
- MCP6V01-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP ZERO-DRIFT 1 CIRC 8SOIC
- Stock
- 1,724
- In Stock :
- 1,724
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Brand :
- Microchip Technology / Atmel
- Base Part Number :
- MCP6V01
- Low-Offset :
- yes
- Base Product Number :
- MCP6V01
- ECCN Code :
- EAR99
- Height :
- 1.2446mm
- Supplier Package :
- SOIC N
- Qualification Status :
- Not Qualified
- Programmable Power :
- No
- Package Shape :
- RECTANGULAR
- Wideband :
- No
- Number of Channels :
- 1
- HTS Code :
- 8542.33.00.01
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- JESD-609 Code :
- e3
- Manufacturer :
- Microchip
- Product Status :
- Active
- JESD-30 Code :
- R-PDSO-G8
- Dimensions :
- 4.9 x 3.9 x 1.25mm
- Gain Bandwidth Product :
- 1.3MHz
- Product Type :
- Op Amps - Operational Amplifiers
- MSL :
- MSL 1 - Unlimited
- Terminal Pitch :
- 1.27 mm
- Voltage Gain :
- 156dB
- Slew Rate :
- 0.5V/μs
- Current - Supply :
- 300μA
- Number of Terminals :
- 8
- Nominal Supply Current :
- 300μA
- Supply Voltage :
- 1.8V
- Reach Compliance Code :
- Compliant
- Common Mode Rejection Ratio :
- 130 dB
- Architecture :
- VOLTAGE-FEEDBACK
- REACH SVHC :
- No SVHC
- Pbfree Code :
- yes
- Input Offset Voltage-Max :
- 2 µV
- Number of Channels per Chip :
- 1
- Operating Supply Voltage :
- 5.5 V
- Published :
- 2000
- Voltage Gain dB :
- 156 dB
- Factory Lead Time :
- 9 Weeks
- Operating Temperature :
- -40°C~125°C
- Series :
- --
- Power Supply Rejection Ratio (PSRR) :
- 130dB
- Product :
- Operational Amplifiers
- Maximum Operating Supply Voltage :
- 5.5 V
- Supply Voltage Limit-Max :
- 6.5V
- Bandwidth :
- 1.3MHz
- Surface Mount :
- yes
- Output Current :
- 22mA
- Temperature Grade :
- Automotive
- RoHS :
- Details
- Package :
- Tube
- Shutdown :
- No Shutdown
- Power Supplies :
- 2/5V
- Lead Free :
- Lead Free
- Unity Gain BW-Nom :
- 1300 kHz
- Screening Level :
- Extended
- Mounting :
- Surface Mount
- Frequency Compensation :
- yes
- Terminal Position :
- Dual
- Type :
- General Purpose Amplifier
- Input Offset Voltage (Vos) :
- 2µV
- Mount :
- Surface Mount
- Length :
- 4.8768mm
- Seated Height-Max :
- 1.75 mm
- Mounting Type :
- Surface Mount
- Supply Current-Max :
- 0.4 mA
- Radiation Hardening :
- No
- Product Category :
- Operational Amplifiers - Op Amps
- Operating Supply Current :
- 300μA
- Shut Down Support :
- No
- Maximum Operating Temperature :
- +125 °C
- Micropower :
- yes
- Mounting Style :
- SMD/SMT
- Supplier Device Package :
- 8-SOIC
- Current - Input Bias :
- 1pA
- Qualification :
- AEC-Q100
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Number of Pins :
- 8
- Amplifier Type :
- Zero-Drift
- Output Type :
- Rail-to-Rail
- Number of Terminations :
- 8
- Output Current per Channel :
- 22mA
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Average Bias Current-Max (IIB) :
- 0.005μA
- Rail to Rail :
- Rail to Rail Input/Output
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Number of Circuits :
- 1
- Package Type :
- SOIC
- Supply Type :
- Single
- Voltage - Input Offset :
- 2µV
- Voltage Gain-Min :
- 3162000
- Power Supply Type :
- Single
- Terminal Form :
- Gull wing
- Width :
- 3.9116mm
- Power :
- No
- Pin Count :
- 8
- Number of Functions :
- 1
- Voltage - Supply, Single/Dual (±) :
- 1.8V~5.5V
- Packaging :
- Tube
- Low-Bias :
- yes
- Peak Reflow Temperature (Cel) :
- 260
- RoHS Status :
- ROHS3 Compliant
- Minimum Operating Temperature :
- -40 °C
- Datasheets
- MCP6V01-E/SN
MCP6V01-E/SN Documents

1 Channels 22mA per Channel 1pA 130 dB Instrumentational OP Amps 0.005μA 5.5 V 1.8V~5.5V MCP6V01 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6V01-E/SN Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the Zero-Drift type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 1.8V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 2μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 300μA, this op amp ic can operate. 156dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 1 circuits. As far as the device is concerned, buffer amplifier has 1 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5.5 V. As a result, it is recommended that a power supply of 300µA be used with this electronic part. As the name implies, -- refers to the series of the buffer op amp. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 3162000. The buffer op amp is equipped with 8 terminals for attaching wires to it.
MCP6V01-E/SN Features
8 Pins
supply voltage of 1.8V
156dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6V01-E/SN Applications
There are a lot of Microchip Technology
MCP6V01-E/SN Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















