MCP6S93-E/UN
- Mfr.Part #
- MCP6S93-E/UN
- Manufacturer
- Microchip Technology
- Package / Case
- 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP PGA 2 CIRCUIT 10MSOP
- Stock
- 1,435
- In Stock :
- 1,435
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Special Purpose Amplifiers
- Screening Level :
- Extended
- Operating Temperature :
- -40°C~125°C
- Supply Voltage :
- 5V
- Terminal Position :
- Dual
- Product Category :
- Special Purpose Amplifiers
- Bandwidth :
- 18MHz
- Width :
- 4.9mm
- Supply Current-Max (Isup) :
- 1.6 mA
- Current - Output / Channel :
- 25mA
- Number of Terminations :
- 10
- Reach Compliance Code :
- Compliant
- Temperature Grade :
- Automotive
- Nominal Supply Current :
- 1.6mA
- Voltage - Input Offset :
- 400μV
- Supplier Package :
- MSOP
- Product Status :
- Active
- Supply Voltage-Min (Vsup) :
- 2.5 V
- Rail to Rail :
- Rail to Rail Input/Output
- Applications :
- Data Acquisition
- Number of Circuits :
- 2
- Package Type :
- MSOP
- Power Supplies :
- 3/5 V
- Current - Supply :
- 1mA
- Type :
- Programmable Gain Amplifier
- Operating Supply Current :
- 1.6 mA
- Amplifier Type :
- Programmable Gain
- Package / Case :
- 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
- REACH SVHC :
- No SVHC
- Current - Input Bias :
- 1pA
- ECCN Code :
- EAR99
- Voltage Gain :
- 30.1dB
- RoHS :
- Details
- Manufacturer :
- Microchip
- Analog IC - Other Type :
- ANALOG CIRCUIT
- Supplier Device Package :
- 10-MSOP
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V
- Published :
- 2004
- Mounting Style :
- SMD/SMT
- JESD-609 Code :
- e3
- Pin Count :
- 10
- Factory Lead Time :
- 6 Weeks
- Peak Reflow Temperature (Cel) :
- 260
- Output Type :
- Rail-to-Rail
- Qualification Status :
- Not Qualified
- Mounting :
- Surface Mount
- JESD-30 Code :
- S-PDSO-G10
- Height :
- 1.1mm
- Number of Functions :
- 1
- Product Type :
- Special Purpose Amplifiers
- Number of Terminals :
- 10
- Terminal Pitch :
- 0.5mm
- Number of Channels per Chip :
- 1
- Number of Pins :
- 10
- Terminal Form :
- Gull wing
- Radiation Hardening :
- No
- Supply Voltage-Max (Vsup) :
- 5.5 V
- Terminal Finish :
- Matte Tin (Sn)
- Length :
- 3mm
- MSL :
- MSL 1 - Unlimited
- Gain Bandwidth Product :
- 18MHz
- Packaging :
- Tube
- Seated Height-Max :
- 1.1 mm
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Pbfree Code :
- yes
- Mount :
- Surface Mount
- Input Offset Voltage (Vos) :
- 4mV
- Slew Rate :
- 22V/µs
- Power Supply Type :
- Single
- Mounting Type :
- Surface Mount
- Number of Elements :
- 1
- Series :
- -
- Resistance :
- 10 TΩ
- Number of Channels :
- 1 Channel
- Package :
- Tube
- Dimensions :
- 3 x 4.9 x 1.1mm
- RoHS Status :
- ROHS3 Compliant
- Operating Supply Voltage :
- 5V
- Package Shape :
- Square
- Maximum Operating Temperature :
- +125 °C
- Minimum Operating Temperature :
- -40 °C
- Base Product Number :
- MCP6S93
- Base Part Number :
- MCP6S93
- Brand :
- Microchip Technology / Atmel
- Surface Mount :
- yes
- Power Supply Rejection Ratio (PSRR) :
- 70dB
- HTS Code :
- 8542.33.00.01
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Datasheets
- MCP6S93-E/UN

1 Channel Channels 1pA Instrumentational OP Amps 5V 2.5V~5.5V MCP6S93 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
MCP6S93-E/UN Overview
In order to protect the op amps, a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 10. It consists of a total of 10 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 10 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 4mV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.6 mA and 10 . Maintain 30.1dB as the voltage gain. In total, there are 2 circuits on this buffer amplifier. Buffer op amp is equipped with 1 Channel channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a whole, there are 1 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. This electronic part is recommended to be used with an 1mA supply for best performance. - is the number that corresponds to the series of the buffer op amp. It is important to keep the resistance within the 10 TΩ range of the op amps. Besides the analog ICs used in this instrumentation amplifier, there is also another type of analog IC called ANALOG CIRCUIT IC. As part of this op amp ic, there are 10 terminals on which wires can be connected.
MCP6S93-E/UN Features
10 Pins
supply voltage of 5V
30.1dB voltage gain
Output Type: Rail-to-Rail
Resistance of 10 TΩ
10Terminations
MCP6S93-E/UN Applications
There are a lot of Microchip Technology
MCP6S93-E/UN Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















