MCP6L92T-E/MS
- Mfr.Part #
- MCP6L92T-E/MS
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8MSOP
- Stock
- 21,415
- In Stock :
- 21,415
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Output Type :
- Rail-to-Rail
- Max Operating Temperature :
- 125 °C
- Current - Supply :
- 850μA
- Product :
- Operational Amplifiers
- Power Supply Type :
- Single
- MSL :
- MSL 1 - Unlimited
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Supply Type :
- Single
- Series :
- --
- Schedule B :
- 8542330000
- Height :
- 950μm
- Bandwidth :
- 10MHz
- Package Shape :
- Square
- Mounting Style :
- SMD/SMT
- Number of Channels per Chip :
- 2
- Number of Terminations :
- 8
- Number of Elements :
- 2
- Slew Rate :
- 7V/µs
- Current - Output / Channel :
- 25 mA
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Voltage - Input Offset :
- 1mV
- RoHS Status :
- ROHS3 Compliant
- Voltage Gain :
- 105dB
- Output Current :
- 25mA
- Number of Pins :
- 8
- Mounting Type :
- Surface Mount
- Mounting :
- Surface Mount
- Number of Amplifiers :
- 2
- Terminal Form :
- Gull wing
- Terminal Position :
- Dual
- Product Status :
- Active
- Operating Supply Current :
- 850 uA
- Length :
- 3mm
- JESD-30 Code :
- S-PDSO-G8
- Number of Circuits :
- 2
- Lead Free :
- Lead Free
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Number of Functions :
- 2
- Maximum Operating Supply Voltage :
- 6 V
- Gain Bandwidth Product :
- 10 MHz
- Input Bias Current :
- 1 pA
- Dimensions :
- 3 x 3 x 0.95mm
- Type :
- General Purpose Amplifier
- Radiation Hardening :
- No
- Seated Height-Max :
- 1.1 mm
- Operating Supply Voltage :
- 6 V
- Surface Mount :
- yes
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Published :
- 2009
- Reach Compliance Code :
- Compliant
- Brand :
- Microchip Technology
- Max Supply Voltage :
- 6 V
- Input Offset Voltage (Vos) :
- 4mV
- Supply Voltage :
- 5V
- Product Category :
- Operational Amplifiers - Op Amps
- Min Operating Temperature :
- -40 °C
- Amplifier Type :
- GENERAL PURPOSE
- Current - Input Bias :
- 1pA
- Number of Terminals :
- 8
- Voltage - Supply, Single/Dual (±) :
- 2.4V~6V
- Package Type :
- MSOP
- Number of Channels :
- 2
- Maximum Operating Temperature :
- +125 °C
- Common Mode Rejection Ratio :
- 91 dB
- Voltage Gain dB :
- 105 dB
- Minimum Operating Temperature :
- -40 °C
- Peak Reflow Temperature (Cel) :
- 260
- Output Current per Channel :
- 25 mA
- Min Supply Voltage :
- 2.4 V
- Supplier Device Package :
- 8-MSOP
- Supplier Package :
- MSOP
- Operating Temperature :
- -40°C~125°C
- RoHS :
- Compliant
- Nominal Supply Current :
- 850μA
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Pin Count :
- 8
- Base Product Number :
- MCP6L92
- Screening Level :
- Extended
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- ECCN Code :
- EAR99
- Manufacturer :
- Microchip
- Terminal Pitch :
- 0.65mm
- Supply Voltage Limit-Max :
- 7V
- Rail to Rail :
- Rail to Rail Input/Output
- Width :
- 3mm
- Mount :
- Surface Mount
- Product Type :
- Op Amps - Operational Amplifiers
- Temperature Grade :
- Automotive
- Input Offset Voltage-Max :
- 4000 µV
- Factory Lead Time :
- 7 Weeks
- Packaging :
- Tape and Reel (TR)
- Shutdown :
- No Shutdown
- HTS Code :
- 8542.33.00.01
- Unity Gain BW-Nom :
- 10000 kHz
- JESD-609 Code :
- e3
- REACH SVHC :
- No SVHC
- Base Part Number :
- MCP6L92
- Datasheets
- MCP6L92T-E/MS

2 Channels 25 mA per Channel 1pA 91 dB Instrumentational OP Amps 6 V 2.4V~6V MCP6L92 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
MCP6L92T-E/MS Overview
Packaging for the buffer amplifier is in the form of a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 5V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 4mV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 850 uA , this buffer op amp will be able to operate. Keeping the voltage gain at 105dB is the best course of action. The buffer amp consists of 2 circuits in total. 2 channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. This op amp needs to be operated at a temperature of not less than -40 °C degrees Celsius in order to function properly. You should not use op amp above 125 °C degrees. A total of 2 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 6 V. A supply of 850µA or higher is recommended for use with this electronic part. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 6 V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 2.4 V, it is recommended to keep it higher. The -- stands for the buffer op amp's serial number. As you can see, the linear amplifier has 2 amplifiers. The buffer op amp has 8 terminals that can be used for connecting wires to the amplifier.
MCP6L92T-E/MS Features
8 Pins
supply voltage of 5V
105dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6L92T-E/MS Applications
There are a lot of Microchip Technology
MCP6L92T-E/MS Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















