MCP6L02T-E/MS
- Mfr.Part #
- MCP6L02T-E/MS
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8MSOP
- Stock
- 89,570
- In Stock :
- 89,570
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Dimensions :
- 3 x 3 x 0.95mm
- Terminal Position :
- Dual
- Supply Type :
- Single
- Reach Compliance Code :
- Compliant
- Power Supply Rejection Ratio (PSRR) :
- 83dB
- Operating Supply Voltage :
- 6 V
- RoHS :
- Compliant
- Supply Voltage Limit-Max :
- 7V
- Base Product Number :
- MCP6L02
- Frequency Compensation :
- yes
- Number of Elements :
- 2
- Maximum Operating Temperature :
- +125 °C
- Low-Bias :
- yes
- Height :
- 950μm
- Min Supply Voltage :
- 1.8 V
- Number of Channels per Chip :
- 2
- Supplier Package :
- MSOP
- RoHS Status :
- ROHS3 Compliant
- Min Operating Temperature :
- -40 °C
- Lead Free :
- Lead Free
- Micropower :
- yes
- Shut Down Support :
- No
- Manufacturer :
- Microchip
- Packing Method :
- Tape and Reel
- Product Type :
- Op Amps - Operational Amplifiers
- Input Bias Current :
- 2 pA
- Power Supplies :
- 5V
- Maximum Operating Supply Voltage :
- 6 V
- Voltage Gain :
- 105dB
- Length :
- 3mm
- Qualification Status :
- Not Qualified
- Number of Channels :
- 2
- Output Current per Channel :
- 20 mA
- Number of Amplifiers :
- 2
- Supplier Device Package :
- 8-MSOP
- Output Type :
- Rail-to-Rail
- Slew Rate :
- 0.6V/µs
- Input Offset Voltage-Max :
- 5000 µV
- Surface Mount :
- yes
- Seated Height-Max :
- 1.1 mm
- Published :
- 2005
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Current - Input Bias :
- 2pA
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Pin Count :
- 8
- Product Category :
- Operational Amplifiers - Op Amps
- Mounting Style :
- SMD/SMT
- Series :
- -
- JESD-30 Code :
- S-PDSO-G8
- Bandwidth :
- 1 MHz
- Common Mode Rejection Ratio :
- 78 dB
- Terminal Form :
- Gull wing
- Mounting :
- Surface Mount
- Current - Output / Channel :
- 20 mA
- Product Status :
- Active
- MSL :
- MSL 1 - Unlimited
- Mounting Type :
- Surface Mount
- Number of Terminations :
- 8
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Voltage - Supply, Single/Dual (±) :
- 1.8V~6V
- Current - Supply :
- 85µA (x2 Channels)
- Rail to Rail :
- Rail to Rail Input/Output
- Shutdown :
- No Shutdown
- Max Supply Voltage :
- 6 V
- Max Operating Temperature :
- 125 °C
- Nominal Supply Current :
- 85μA
- Power Supply Type :
- Single
- Input Offset Voltage (Vos) :
- 5mV
- Terminal Pitch :
- 0.65mm
- Product :
- Operational Amplifiers
- Screening Level :
- Extended
- Amplifier Type :
- GENERAL PURPOSE
- Voltage Gain dB :
- 105 dB
- ECCN Code :
- EAR99
- Number of Functions :
- 2
- Radiation Hardening :
- No
- Number of Circuits :
- 2
- Package Type :
- MSOP
- Number of Pins :
- 8
- Minimum Operating Temperature :
- -40 °C
- Low-Offset :
- No
- REACH SVHC :
- No SVHC
- Operating Temperature :
- -40°C~125°C
- Schedule B :
- 8542390000, 8542390000/8542390000/8542390000/8542390000/8542390000
- Mount :
- Surface Mount
- Type :
- General Purpose Amplifier
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- JESD-609 Code :
- e3
- Peak Reflow Temperature (Cel) :
- 260
- Brand :
- Microchip Technology / Atmel
- Factory Lead Time :
- 7 Weeks
- Supply Voltage :
- 5V
- Operating Supply Current :
- 85 uA
- Unity Gain BW-Nom :
- 1000 kHz
- Temperature Grade :
- Automotive
- Gain Bandwidth Product :
- 1 MHz
- Package Shape :
- Square
- Base Part Number :
- MCP6L02
- Width :
- 3mm
- Architecture :
- VOLTAGE-FEEDBACK
- Output Current :
- 20mA
- Packaging :
- Tape and Reel (TR)
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Pbfree Code :
- yes
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Supply Current-Max :
- 0.34 mA
- Voltage - Input Offset :
- 1mV
- HTS Code :
- 8542.39.00.01
- Number of Terminals :
- 8
- Datasheets
- MCP6L02T-E/MS
MCP6L02T-E/MS Documents

2 Channels 20 mA per Channel 2pA 78 dB Instrumentational OP Amps 6 V 1.8V~6V MCP6L02 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
MCP6L02T-E/MS Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 85 uA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On this instrumentation amplifier, there are 2 circuits that are connected together. There are 2 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. In order for op amp to function properly, the temperature should not be lower than -40 °C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 125 °C. There are a total of 2 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 6 V. The instrumentation amplifier is packed in the form of TAPE AND REEL. As a recommendation, this electronic component should be used with a power supply that can deliver 85µA (x2 Channels). I would like to point out that this electrical component is capable of working from a voltage below 6 V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 1.8 V at all times. The - indicates the series number of the op amp. In total, there are 2 op amps on the device. In order to connect the buffer amplifier to the wires, it is equipped with 8 terminals.
MCP6L02T-E/MS Features
8 Pins
supply voltage of 5V
105dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6L02T-E/MS Applications
There are a lot of Microchip Technology
MCP6L02T-E/MS Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















