MCP6H92-E/SN
- Mfr.Part #
- MCP6H92-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 149
- In Stock :
- 149
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Current - Supply :
- 2mA
- Mounting Type :
- Surface Mount
- Shut Down Support :
- No
- Peak Reflow Temperature (Cel) :
- 260
- Mounting Style :
- SMD/SMT
- Minimum Operating Temperature :
- -40 °C
- Base Part Number :
- MCP6H92
- Power Supply Type :
- Single/Dual
- Operating Supply Voltage :
- 3.5 V to 12 V
- Series :
- --
- Supply Voltage :
- 5V
- Common Mode Rejection Ratio :
- 75 dB
- Radiation Hardening :
- No
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Base Product Number :
- MCP6H92
- Supplier Package :
- SOIC N
- Unity Gain BW-Nom :
- 10000 kHz
- Screening Level :
- Extended
- Published :
- 2012
- Frequency Compensation :
- yes
- Architecture :
- VOLTAGE-FEEDBACK
- MSL :
- MSL 1 - Unlimited
- Maximum Operating Supply Voltage :
- ±6/12 V
- Input Offset Voltage (Vos) :
- 4V
- Voltage - Supply, Single/Dual (±) :
- 3.5V~12V ±1.75V~6V
- REACH SVHC :
- No SVHC
- Voltage Gain :
- 115dB
- Pin Count :
- 8
- Number of Channels per Chip :
- 2
- Supplier Device Package :
- 8-SOIC
- Power Supply Rejection Ratio (PSRR) :
- 75dB
- Max Frequency :
- 10kHz
- Rail to Rail :
- Rail to Rail Output
- Amplifier Type :
- GENERAL PURPOSE
- Number of Pins :
- 8
- Width :
- 3.9mm
- Product :
- Operational Amplifiers
- Current - Output / Channel :
- 41mA
- Package Type :
- SOIC
- Number of Terminations :
- 8
- Packaging :
- Tube
- Gain Bandwidth Product :
- 10MHz
- RoHS :
- Details
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Brand :
- Microchip Technology / Atmel
- Product Status :
- Active
- Bandwidth :
- 10MHz
- Length :
- 4.9mm
- Nominal Supply Current :
- 2mA
- Qualification :
- AEC-Q100
- Operating Temperature :
- -40°C~125°C
- Low-Offset :
- No
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Type :
- General Purpose Amplifier
- Operating Supply Current :
- 2 mA
- Terminal Form :
- Gull wing
- Terminal Position :
- Dual
- Lead Free :
- Lead Free
- Number of Channels :
- 2
- Slew Rate :
- 10V/μs
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Output Current per Channel :
- 41 mA
- ECCN Code :
- EAR99
- Current - Input Bias :
- 10pA
- Mounting :
- Surface Mount
- Manufacturer :
- Microchip
- JESD-609 Code :
- e3
- Voltage - Input Offset :
- 1mV
- Micropower :
- No
- Dimensions :
- 4.9 x 3.9 x 1.5mm
- Programmable Power :
- No
- Factory Lead Time :
- 8 Weeks
- Height :
- 1.5mm
- Surface Mount :
- yes
- Package :
- Tube
- Product Category :
- Operational Amplifiers - Op Amps
- Shutdown :
- No Shutdown
- RoHS Status :
- ROHS3 Compliant
- Output Type :
- Rail-to-Rail
- Low-Bias :
- yes
- Number of Circuits :
- 2
- Number of Functions :
- 2
- Product Type :
- Op Amps - Operational Amplifiers
- Maximum Operating Temperature :
- +125 °C
- Supply Voltage Limit-Max :
- 13V
- Datasheets
- MCP6H92-E/SN
MCP6H92-E/SN Documents

2 Channels 41 mA per Channel 10pA 75 dB Instrumentational OP Amps 3.5 V to 12 V 3.5V~12V ±1.75V~6V MCP6H92 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6H92-E/SN Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 4V as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 2 mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 115dB for the time being. A instrumentation amplifier like this has 2 circuits. On the buffer amps, there are 2 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 3.5 V to 12 V. There is a recommendation that this electrical part be used with a supply with 2mA current rating. In this case, -- represents the instrumentation amplifiers' series number.
MCP6H92-E/SN Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
MCP6H92-E/SN Applications
There are a lot of Microchip Technology
MCP6H92-E/SN Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















