MCP6H72T-E/SN
- Mfr.Part #
- MCP6H72T-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 44,909
- In Stock :
- 44,909
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Terminal Form :
- Gull wing
- Series :
- --
- Package :
- Tape and Reel (TR)
- Voltage - Input Offset :
- 1mV
- Supply Voltage Limit-Max :
- 13.2 V
- Mounting Type :
- Surface Mount
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Supplier Device Package :
- 8-SOIC
- Factory Lead Time :
- 8 Weeks
- Number of Channels per Chip :
- 2
- Unity Gain BW-Nom :
- 2700 kHz
- Type :
- General Purpose Amplifier
- Number of Circuits :
- 2
- Input Offset Voltage-Max :
- 4000 µV
- Manufacturer :
- Microchip Technology Inc
- Voltage Gain-Min :
- 100000
- Number of Terminals :
- 8
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Min Operating Temperature :
- -40 °C
- Length :
- 4.9mm
- Packing Method :
- Tape and Reel
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Screening Level :
- Extended
- JESD-609 Code :
- e3
- Width :
- 3.9 mm
- Mounting :
- Surface Mount
- Power :
- No
- Shutdown :
- No Shutdown
- Amplifier Type :
- GENERAL PURPOSE
- JESD-30 Code :
- R-PDSO-G8
- Frequency Compensation :
- yes
- Product Status :
- Active
- Reach Compliance Code :
- Compliant
- Wideband :
- No
- Max Dual Supply Voltage :
- 6 V
- Micropower :
- yes
- Supply Current-Max :
- 1.2 mA
- Temperature Grade :
- Automotive
- Number of Functions :
- 2
- Package Shape :
- RECTANGULAR
- Low-Bias :
- yes
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Terminal Pitch :
- 1.27 mm
- Supplier Package :
- SOIC N
- Voltage Gain :
- 120dB
- Power Supplies :
- +-1.75/+-6/3.5/12 V
- Base Part Number :
- MCP6H72
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Product Type :
- Op Amps - Operational Amplifiers
- Height Seated (Max) :
- 1.75mm
- Peak Reflow Temperature (Cel) :
- 260
- Supply Voltage :
- 5V
- Mount :
- Surface Mount
- Programmable Power :
- No
- Number of Terminations :
- 8
- Maximum Operating Supply Voltage :
- ±6/12 V
- Terminal Position :
- Dual
- Radiation Hardening :
- No
- Low-Offset :
- No
- Max Operating Temperature :
- 125 °C
- Gain Bandwidth Product :
- 2.7MHz
- Surface Mount :
- yes
- RoHS :
- Compliant
- Number of Pins :
- 8
- Slew Rate :
- 2V/μs
- Current - Supply :
- 480μA
- Power Supply Rejection Ratio (PSRR) :
- 82dB
- Current - Input Bias :
- 10pA
- Common Mode Rejection Ratio :
- 76 dB
- Number of Elements :
- 2
- Seated Height-Max :
- 1.75 mm
- Packaging :
- Tape and Reel (TR)
- Min Supply Voltage :
- 3.5 V
- Current - Output / Channel :
- 53 mA
- Qualification Status :
- Not Qualified
- Published :
- 2012
- Operating Temperature :
- -40°C~125°C
- RoHS Status :
- ROHS3 Compliant
- Max Supply Voltage :
- 12 V
- Pin Count :
- 8
- Product :
- Operational Amplifiers
- Output Type :
- Rail-to-Rail
- Voltage - Supply, Single/Dual (±) :
- 3.5V~12V ±1.75V~6V
- HTS Code :
- 8542.33.00.01
- Architecture :
- VOLTAGE-FEEDBACK
- Min Dual Supply Voltage :
- 1.75 V
- ECCN Code :
- EAR99
- Base Product Number :
- MCP6H72
- Datasheets
- MCP6H72T-E/SN

10pA 76 dB Instrumentational OP Amps 3.5V~12V ±1.75V~6V MCP6H72 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6H72T-E/SN Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. You should keep the voltage gain at 120dB for the time being. A instrumentation amplifier like this has 2 circuits. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. To operate this buffer amplifier, the temperature must not be lower than -40 °C. A temperature greater than 125 °C should not be used for the operation of buffer amplifier. 2 elements make up the design of this buffer amplifier. The linear amplifier is packaged by using a TAPE AND REEL axis. There is a recommendation that this electrical part be used with a supply with 480μA current rating. This electric component can work from a voltage of under 12 V as far as supply voltage is concerned. A voltage of 3.5 V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 6 V volts when you conduct this part. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 100000. 8 wire terminals are provided on this op amp.
MCP6H72T-E/SN Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6H72T-E/SN Applications
There are a lot of Microchip Technology
MCP6H72T-E/SN Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















