MCP6H72-E/SN
- Mfr.Part #
- MCP6H72-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 15
- In Stock :
- 15
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Product :
- Operational Amplifiers
- Low-Bias :
- yes
- Wideband :
- No
- Amplifier Type :
- GENERAL PURPOSE
- Shutdown :
- No Shutdown
- Supply Voltage :
- 5V
- Published :
- 2002
- Max Dual Supply Voltage :
- 6 V
- Mounting :
- Surface Mount
- Terminal Position :
- Dual
- Packaging :
- Tube
- Voltage - Input Offset :
- 1mV
- Qualification :
- AEC-Q100
- Nominal Supply Current :
- 480μA
- Mounting Style :
- SMD/SMT
- Power Supply Type :
- Single/Dual
- Number of Channels :
- 2
- Height :
- 1.5mm
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Packing Method :
- Tube
- Voltage - Supply, Single/Dual (±) :
- 3.5V~12V ±1.75V~6V
- Current - Input Bias :
- 10pA
- Max Supply Voltage :
- 12 V
- Number of Pins :
- 8
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Product Status :
- Active
- Slew Rate :
- 2V/μs
- Unity Gain BW-Nom :
- 2700 kHz
- Power Supplies :
- +-1.75/+-6/3.5/12 V
- Minimum Operating Temperature :
- - 40 C
- Terminal Form :
- Gull wing
- JESD-609 Code :
- e3
- Power Supply Rejection Ratio (PSRR) :
- 82dB
- Series :
- --
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Max Frequency :
- 10kHz
- Min Supply Voltage :
- 3.5 V
- Gain Bandwidth Product :
- 2.7MHz
- Package Shape :
- RECTANGULAR
- REACH SVHC :
- No SVHC
- Operating Temperature :
- -40°C~125°C
- Min Operating Temperature :
- -40 °C
- Operating Supply Current :
- 480 uA
- Input Offset Voltage (Vos) :
- 1mV
- Supplier Package :
- SOIC N
- Type :
- General Purpose Amplifier
- Qualification Status :
- Not Qualified
- Mount :
- Surface Mount
- Architecture :
- VOLTAGE-FEEDBACK
- Voltage Gain :
- 120dB
- Manufacturer :
- Microchip
- Base Product Number :
- MCP6H72
- Power :
- No
- RoHS Status :
- ROHS3 Compliant
- Operating Supply Voltage :
- 3.5 V to 12 V
- Maximum Operating Temperature :
- + 125 C
- Number of Terminals :
- 8
- Product Category :
- Operational Amplifiers - Op Amps
- Bandwidth :
- 2.7 MHz
- Brand :
- Microchip Technology
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Reach Compliance Code :
- Compliant
- Current - Output / Channel :
- 53 mA
- Min Dual Supply Voltage :
- 1.75 V
- Width :
- 3.9mm
- ECCN Code :
- EAR99
- Number of Functions :
- 2
- Supply Type :
- Single
- Voltage Gain dB :
- 120 dB
- Input Bias Current :
- 25 nA
- Pin Count :
- 8
- Length :
- 4.9mm
- Surface Mount :
- yes
- Shut Down Support :
- No
- Supply Current-Max :
- 1.2 mA
- Max Operating Temperature :
- 125 °C
- Terminal Pitch :
- 1.27 mm
- Package :
- Tube
- Lead Free :
- Lead Free
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Programmable Power :
- No
- Screening Level :
- Extended
- Temperature Grade :
- Automotive
- Common Mode Rejection Ratio :
- 76 dB
- Output Type :
- Rail-to-Rail
- Input Offset Voltage-Max :
- 4000 µV
- Number of Channels per Chip :
- 2
- Product Type :
- Op Amps - Operational Amplifiers
- Factory Lead Time :
- 8 Weeks
- JESD-30 Code :
- R-PDSO-G8
- Supplier Device Package :
- 8-SOIC
- Current - Supply :
- 480μA
- Voltage Gain-Min :
- 100000
- Supply Voltage Limit-Max :
- 13.2 V
- Radiation Hardening :
- No
- Base Part Number :
- MCP6H72
- Number of Terminations :
- 8
- Number of Elements :
- 2
- Mounting Type :
- Surface Mount
- Micropower :
- yes
- Peak Reflow Temperature (Cel) :
- 260
- Seated Height-Max :
- 1.75 mm
- HTS Code :
- 8542.33.00.01
- Low-Offset :
- No
- Number of Amplifiers :
- 2
- Number of Circuits :
- 2
- Frequency Compensation :
- yes
- RoHS :
- Details
- Datasheets
- MCP6H72-E/SN

2 Channels 10pA 76 dB Instrumentational OP Amps 3.5 V to 12 V 3.5V~12V ±1.75V~6V MCP6H72 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6H72-E/SN Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 5V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 1mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 480 uA, this op amp ic can operate. 120dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 2 circuits. As far as the device is concerned, buffer amplifier has 2 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. For the buffer op amp to operate properly, it must be above the temperature of -40 °C degrees Celsius. No temperature greater than 125 °C should be used. The linear amplifier consists of 2 different elements in total. The operating supply voltage of the buffer op amp is rated at 3.5 V to 12 V. For packing the buffer amplifier, the TUBE-axis is adopted. As a result, it is recommended that a power supply of 480µA be used with this electronic part. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 12 V. A high supply voltage of more than 3.5 V is recommended for the instrumentation amplifier's supply voltage. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 6 V volts. As the name implies, -- refers to the series of the buffer op amp. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 100000. A total of 2 instrumentation amplifiers are present on the device. The buffer op amp is equipped with 8 terminals for attaching wires to it.
MCP6H72-E/SN Features
8 Pins
supply voltage of 5V
120dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6H72-E/SN Applications
There are a lot of Microchip Technology
MCP6H72-E/SN Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















