MCP6H02-E/SN
- Mfr.Part #
- MCP6H02-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 2,577
- In Stock :
- 2,577
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Series :
- --
- Average Bias Current-Max (IIB) :
- 0.025 µA
- Operating Temperature :
- -40°C~125°C
- Qualification :
- AEC-Q100
- Mounting Type :
- Surface Mount
- Input Offset Voltage-Max :
- 3500 µV
- Mounting Style :
- SMD/SMT
- Supply Voltage Limit-Max :
- 17V
- Current - Supply :
- 135µA
- Pin Count :
- 8
- Maximum Operating Temperature :
- +125 °C
- Width :
- 3.9mm
- Shutdown :
- No Shutdown
- Terminal Position :
- Dual
- Base Part Number :
- MCP6H02
- Operating Supply Current :
- 135µA
- Nominal Supply Current :
- 135µA
- Mounting :
- Surface Mount
- Maximum Input Offset Current :
- 0.000001(TYP)@16V
- Supply Type :
- Single, Dual
- Lead Free :
- Lead Free
- Number of Functions :
- 2
- Product Status :
- Active
- Product Category :
- Operational Amplifiers - Op Amps
- JESD-609 Code :
- e3
- Operating Supply Voltage :
- 8V
- Number of Pins :
- 8
- Single Supply Voltage (Min) :
- 3.5(V)
- Temperature Grade :
- Automotive
- Rail/Rail I/O Type :
- Rail to Rail Output
- Amplifier Type :
- GENERAL PURPOSE
- Number of Channels per Chip :
- 2
- Bandwidth :
- 1.2MHz
- Factory Lead Time :
- 8 Weeks
- Power Supply Rejection Ratio :
- 87(dB)
- Brand :
- Microchip Technology / Atmel
- Shut Down Support :
- No
- Output Type :
- Rail-to-Rail
- Common Mode Rejection Ratio :
- 78 dB
- Terminal Form :
- Gull wing
- Dual Supply Voltage (Min) :
- ±1.75(V)
- Frequency Compensation :
- yes
- Number of Terminals :
- 8
- REACH SVHC :
- No SVHC
- Low-Bias :
- yes
- Power Supply Rejection Ratio (PSRR) :
- 87dB
- Voltage Gain :
- 115dB
- Type :
- General Purpose Amplifier
- Length :
- 4.9mm
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Number of Channels :
- 2
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- RoHS :
- Details
- Minimum Operating Temperature :
- -40 °C
- Rail to Rail :
- Rail to Rail Output
- Single Supply Voltage (Typ) :
- 5/9/12/15(V)
- RoHS Status :
- ROHS3 Compliant
- Base Product Number :
- MCP6H02
- Height :
- 1.25mm
- Published :
- 2006
- Product Type :
- Op Amps - Operational Amplifiers
- Micropower :
- yes
- Reach Compliance Code :
- Compliant
- Voltage Gain in dB :
- 115(dB)
- Voltage - Input Offset :
- 700µV
- Terminal Finish :
- Matte Tin (Sn)
- Unity Gain Bandwidth Product :
- 1.2
- Dual Supply Voltage (Max) :
- ±8(V)
- Output Current :
- 50mA
- Operating Temperature Classification :
- Automotive
- Package :
- Tube
- Package Shape :
- RECTANGULAR
- Output Current per Channel :
- 50mA
- Seated Height-Max :
- 1.75 mm
- Terminal Pitch :
- 1.27 mm
- Supply Voltage :
- 5V
- Supply Current-Max :
- 0.185 mA
- Dimensions :
- 4.9 x 3.9 x 1.25mm
- Slew Rate :
- 0.8V/µs
- Unity Gain BW-Nom :
- 1200 kHz
- Shut Down Feature :
- No
- ECCN Code :
- 3A991.A.2
- Supplier Package :
- SOIC N
- Input Offset Voltage :
- 3.5@16V(mV)
- Current - Input Bias :
- 10pA
- Manufacturer :
- Microchip
- Number of Terminations :
- 8
- Number of Circuits :
- 2
- Package Type :
- SOIC N
- Product :
- Operational Amplifiers
- Single Supply Voltage (Max) :
- 16(V)
- Number of Elements :
- 2
- Peak Reflow Temperature (Cel) :
- NOT SPECIFIED
- Voltage - Supply, Single/Dual (±) :
- 3.5V~16V ±1.75V~8V
- Screening Level :
- Extended
- Packaging :
- Tube
- MSL :
- MSL 1 - Unlimited
- HTS Code :
- 8542.31.00.01
- Mount :
- Surface Mount
- Supplier Device Package :
- 8-SOIC
- Architecture :
- VOLTAGE-FEEDBACK
- Input Offset Voltage (Vos) :
- 3.5mV
- Operating Temp Range :
- -40C to 125C
- Rad Hardened :
- No
- Dual Supply Voltage (Typ) :
- ±3/±5(V)
- Gain Bandwidth Product :
- 1.2MHz
- JESD-30 Code :
- R-PDSO-G8
- Packing Method :
- Tube
- Low-Offset :
- No
- Power Supplies :
- +-1.75/+-8/3.5/16 V
- Voltage Gain-Min :
- 56234
- Power Supply Requirement :
- Single/Dual
- Current - Output / Channel :
- 50 mA
- Surface Mount :
- yes
- Radiation Hardening :
- No
- Power Supply Type :
- Single/Dual
- Qualification Status :
- Not Qualified
- Datasheets
- MCP6H02-E/SN
MCP6H02-E/SN Documents

2 Channels 50mA per Channel 10pA 78 dB Instrumentational OP Amps 0.025 µA 8V 3.5V~16V ±1.75V~8V MCP6H02 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP6H02-E/SN Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 3.5mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 135μA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 115dB for the time being. A instrumentation amplifier like this has 2 circuits. On the buffer amps, there are 2 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. 2 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 8V. The linear amplifier is packaged by using a TUBE axis. There is a recommendation that this electrical part be used with a supply with 135µA current rating. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 56234. 8 wire terminals are provided on this op amp.
MCP6H02-E/SN Features
8 Pins
supply voltage of 5V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6H02-E/SN Applications
There are a lot of Microchip Technology
MCP6H02-E/SN Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















