MCP665T-E/UN
- Mfr.Part #
- MCP665T-E/UN
- Manufacturer
- Microchip Technology
- Package / Case
- 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 10MSOP
- Stock
- 9,440
- In Stock :
- 9,440
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Mounting Type :
- Surface Mount
- Radiation Hardening :
- No
- Width :
- 3 mm
- Supply Type :
- Single
- Frequency Compensation :
- yes
- Common Mode Rejection Ratio :
- 64 dB
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Amplifier Type :
- GENERAL PURPOSE
- Operating Supply Current :
- 6mA
- Number of Terminals :
- 10
- JESD-30 Code :
- S-PDSO-G10
- Current - Input Bias :
- 6pA
- Product Category :
- Operational Amplifiers - Op Amps
- Voltage Gain :
- 126dB
- Mounting Style :
- SMD/SMT
- Reach Compliance Code :
- Compliant
- Published :
- 2012
- Number of Pins :
- 10
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Base Part Number :
- MCP665
- Height :
- 0.85 mm
- Supply Current-Max :
- 18 mA
- Terminal Form :
- Gull wing
- Factory Lead Time :
- 8 Weeks
- Minimum Operating Temperature :
- - 40 C
- Current - Supply :
- 6mA
- Package Shape :
- Square
- Low-Bias :
- yes
- Unity Gain BW-Nom :
- 60000 kHz
- Terminal Position :
- Dual
- Mounting :
- Surface Mount
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Number of Functions :
- 2
- Pin Count :
- 10
- Package :
- Tape and Reel (TR)
- Manufacturer :
- Microchip
- Screening Level :
- Extended
- Packaging :
- Tape and Reel (TR)
- Mount :
- Surface Mount
- Qualification Status :
- Not Qualified
- Output Type :
- Rail-to-Rail
- Pbfree Code :
- yes
- Programmable Power :
- No
- Architecture :
- VOLTAGE-FEEDBACK
- Package / Case :
- 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
- Input Offset Voltage-Max :
- 8000 µV
- Nominal Supply Current :
- 6mA
- Series :
- --
- Operating Supply Voltage :
- 5.5 V
- Peak Reflow Temperature (Cel) :
- 260
- Maximum Operating Temperature :
- + 125 C
- Shutdown :
- No Shutdown
- Voltage - Input Offset :
- 1.8mV
- Supplier Package :
- MSOP
- Base Product Number :
- MCP665
- Product Type :
- Op Amps - Operational Amplifiers
- RoHS :
- Details
- Output Current :
- 90mA
- Power Supplies :
- 3/5V
- Type :
- General Purpose Amplifier
- Terminal Pitch :
- 0.5mm
- Number of Channels per Chip :
- 2
- Supply Voltage Limit-Max :
- 6.5V
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Micropower :
- No
- Input Offset Voltage (Vos) :
- 1.8mV
- Product :
- Operational Amplifiers
- JESD-609 Code :
- e3
- Packing Method :
- Tape and Reel
- Voltage Gain-Min :
- 25100
- Product Status :
- Active
- Operating Temperature :
- -40°C~125°C
- Slew Rate :
- 32V/μs
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V ±1.25V~2.75V
- Supplier Device Package :
- 10-MSOP
- Voltage Gain dB :
- 126 dB
- Number of Elements :
- 2
- Wideband :
- No
- Surface Mount :
- yes
- Power :
- No
- Temperature Grade :
- Automotive
- HTS Code :
- 8542.33.00.01
- Current - Output / Channel :
- 90 mA
- Seated Height-Max :
- 1.1 mm
- Gain Bandwidth Product :
- 60MHz
- Maximum Operating Supply Voltage :
- 5.5 V
- Number of Circuits :
- 2
- Qualification :
- AEC-Q100
- RoHS Status :
- ROHS3 Compliant
- Number of Channels :
- 2 Channel
- Low-Offset :
- No
- Brand :
- Microchip Technology
- Height Seated (Max) :
- 1.1mm
- Supply Voltage :
- 2.5V
- Average Bias Current-Max (IIB) :
- 0.005μA
- ECCN Code :
- EAR99
- Output Current per Channel :
- 80mA
- Length :
- 3mm
- Number of Terminations :
- 10
- Datasheets
- MCP665T-E/UN

2 Channel Channels 80mA per Channel 6pA 64 dB Instrumentational OP Amps 0.005μA 5.5 V 2.5V~5.5V ±1.25V~2.75V MCP665 10 Pins 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
MCP665T-E/UN Overview
It is packaged in an 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 10 terminations this year. A total of 10 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 2.5V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 10 pins. Op amp ic rates 1.8mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 6mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 126dB. This op amp ic has 2 circuits. There are a total of 2 Channel channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. There are 2 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. For optimal performance, this electrical part should be connected to a supply with a current of 6mA. Buffer op amp series numbers are indicated by the --. This op amp ic can conduct a minimum voltage gain of 25100. There are 10 wire terminals on this op amp ic.
MCP665T-E/UN Features
10 Pins
supply voltage of 2.5V
126dB voltage gain
Output Type: Rail-to-Rail
10Terminations
MCP665T-E/UN Applications
There are a lot of Microchip Technology
MCP665T-E/UN Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















