MCP662T-E/SN
- Mfr.Part #
- MCP662T-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 7,017
- In Stock :
- 7,017
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Product Status :
- Active
- Terminal Pitch :
- 1.27 mm
- Supply Voltage :
- 2.5V
- Shutdown :
- No Shutdown
- Output Current per Channel :
- 80mA
- Voltage - Input Offset :
- 1.8mV
- Mounting Type :
- Surface Mount
- Supply Voltage Limit-Max :
- 6.5V
- Maximum Operating Temperature :
- + 125 C
- Peak Reflow Temperature (Cel) :
- 260
- Qualification Status :
- Not Qualified
- Terminal Form :
- Gull wing
- Output Current :
- 90mA
- RoHS Status :
- ROHS3 Compliant
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V ±1.25V~2.75V
- Frequency Compensation :
- yes
- Power Supplies :
- 3/5V
- Supplier Package :
- SOIC N
- Gain Bandwidth Product :
- 60MHz
- Number of Pins :
- 8
- Product Category :
- Operational Amplifiers - Op Amps
- Mounting :
- Surface Mount
- Current - Input Bias :
- 6pA
- Number of Circuits :
- 2
- Width :
- 3.9 mm
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Pin Count :
- 8
- Terminal Position :
- Dual
- Current - Output / Channel :
- 90 mA
- Operating Supply Current :
- 6mA
- Minimum Operating Temperature :
- - 40 C
- Output Type :
- Rail-to-Rail
- Package Shape :
- RECTANGULAR
- Architecture :
- VOLTAGE-FEEDBACK
- Surface Mount :
- yes
- Programmable Power :
- No
- Manufacturer :
- Microchip
- Number of Elements :
- 2
- Average Bias Current-Max (IIB) :
- 0.005μA
- Factory Lead Time :
- 10 Weeks
- JESD-609 Code :
- e3
- Common Mode Rejection Ratio :
- 64 dB
- Micropower :
- No
- Reach Compliance Code :
- Compliant
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Pbfree Code :
- yes
- Base Part Number :
- MCP662
- Nominal Supply Current :
- 6mA
- Supply Current-Max :
- 18 mA
- Number of Terminals :
- 8
- Amplifier Type :
- GENERAL PURPOSE
- Power :
- No
- Number of Functions :
- 2
- Voltage Gain dB :
- 126 dB
- Base Product Number :
- MCP662
- Length :
- 4.9mm
- Qualification :
- AEC-Q100
- Input Offset Voltage-Max :
- 8000 µV
- Wideband :
- No
- Unity Gain BW-Nom :
- 60000 kHz
- Packaging :
- Tape and Reel (TR)
- Product Type :
- Op Amps - Operational Amplifiers
- Height Seated (Max) :
- 1.75mm
- Mount :
- Surface Mount
- Height :
- 1.25 mm (Min)
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Supply Type :
- Single
- Voltage Gain :
- 126dB
- Published :
- 2012
- Package :
- Tape and Reel (TR)
- Radiation Hardening :
- No
- Supplier Device Package :
- 8-SOIC
- Seated Height-Max :
- 1.75 mm
- Number of Channels :
- 2 Channel
- Number of Terminations :
- 8
- Slew Rate :
- 32V/μs
- Product :
- Operational Amplifiers
- Temperature Grade :
- Automotive
- Packing Method :
- Tape and Reel
- Low-Bias :
- yes
- Brand :
- Microchip Technology
- Maximum Operating Supply Voltage :
- 5.5 V
- Terminal Finish :
- MATTE TIN
- Mounting Style :
- SMD/SMT
- Low-Offset :
- No
- Type :
- General Purpose Amplifier
- Input Offset Voltage (Vos) :
- 1.8mV
- Screening Level :
- Extended
- Operating Supply Voltage :
- 5.5 V
- JESD-30 Code :
- R-PDSO-G8
- Operating Temperature :
- -40°C~125°C
- Number of Channels per Chip :
- 2
- Series :
- --
- Voltage Gain-Min :
- 25100
- Current - Supply :
- 6mA
- RoHS :
- Details
- Datasheets
- MCP662T-E/SN

2 Channel Channels 80mA per Channel 6pA 64 dB Instrumentational OP Amps 0.005μA 5.5 V 2.5V~5.5V ±1.25V~2.75V MCP662 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP662T-E/SN Overview
Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 2.5V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 1.8mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 6mA, this op amp ic can operate. Keeping the voltage gain at 126dB is the best course of action. During the manufacturing process, this buffer amplifier is divided into 2 circuits. As far as the device is concerned, buffer amplifier has 2 Channel channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. The operating supply voltage of the buffer op amp is rated at 5.5 V. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. As a result, it is recommended that a power supply of 6mA be used with this electronic part. As the name implies, -- refers to the series of the buffer op amp. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 25100. The buffer op amp is equipped with 8 terminals for attaching wires to it.
MCP662T-E/SN Features
8 Pins
supply voltage of 2.5V
126dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP662T-E/SN Applications
There are a lot of Microchip Technology
MCP662T-E/SN Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















