MCP662-E/SN
- Mfr.Part #
- MCP662-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8SOIC
- Stock
- 3
- In Stock :
- 3
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Common Mode Rejection Ratio :
- 64 dB
- Qualification Status :
- Not Qualified
- Number of Functions :
- 2
- Current - Output / Channel :
- 90 mA
- Pbfree Code :
- yes
- Programmable Power :
- No
- Voltage Gain-Min :
- 25100
- Power :
- No
- Wideband :
- No
- Length :
- 4.9mm
- Supplier Device Package :
- 8-SOIC
- Supply Current-Max :
- 18 mA
- Bandwidth :
- 60MHz
- Number of Channels per Chip :
- 2
- Output Type :
- Rail-to-Rail
- Input Offset Voltage-Max :
- 8000 µV
- Operating Temperature :
- -40°C~125°C
- Supply Voltage :
- 2.5V
- Supplier Package :
- SOIC N
- Micropower :
- No
- Product :
- Operational Amplifiers
- ECCN Code :
- EAR99
- Slew Rate :
- 32V/μs
- Voltage Gain dB :
- 126 dB
- Number of Pins :
- 8
- Base Product Number :
- MCP662
- Package :
- Tube
- Average Bias Current-Max (IIB) :
- 0.005μA
- HTS Code :
- 8542.33.00.01
- Gain Bandwidth Product :
- 60MHz
- Published :
- 2009
- Manufacturer :
- Microchip
- Product Status :
- Active
- Nominal Supply Current :
- 6mA
- Voltage - Input Offset :
- 1.8mV
- Series :
- --
- Operating Supply Voltage :
- 3, 15 V
- Surface Mount :
- yes
- Shutdown :
- No Shutdown
- Mount :
- Surface Mount
- Temperature Grade :
- Automotive
- Screening Level :
- Extended
- Number of Terminals :
- 8
- Pin Count :
- 8
- Low-Bias :
- yes
- Lead Free :
- Lead Free
- Product Category :
- Operational Amplifiers - Op Amps
- Packaging :
- Tube
- Base Part Number :
- MCP662
- Mounting :
- Surface Mount
- Number of Channels :
- 2
- Qualification :
- AEC-Q100
- Architecture :
- VOLTAGE-FEEDBACK
- Product Type :
- Op Amps - Operational Amplifiers
- Peak Reflow Temperature (Cel) :
- 260
- Low-Offset :
- No
- Mounting Style :
- SMD/SMT
- Height :
- 1.25mm
- Factory Lead Time :
- 10 Weeks
- Terminal Form :
- Gull wing
- Supply Voltage Limit-Max :
- 6.5V
- JESD-609 Code :
- e3
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Dimensions :
- 4.9 x 3.9 x 1.25mm
- Mounting Type :
- Surface Mount
- Maximum Operating Temperature :
- +125 °C
- Rail to Rail :
- Rail to Rail Output
- Current - Input Bias :
- 6pA
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Width :
- 3.9mm
- MSL :
- MSL 1 - Unlimited
- Unity Gain BW-Nom :
- 60000 kHz
- Number of Terminations :
- 8
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V ±1.25V~2.75V
- Type :
- General Purpose Amplifier
- Supply Type :
- Single
- Minimum Operating Temperature :
- -40 °C
- Brand :
- Microchip Technology / Atmel
- Power Supply Type :
- Single
- Package Shape :
- RECTANGULAR
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Terminal Pitch :
- 1.27 mm
- Current - Supply :
- 6mA
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Input Offset Voltage (Vos) :
- 8mV
- Amplifier Type :
- GENERAL PURPOSE
- JESD-30 Code :
- R-PDSO-G8
- REACH SVHC :
- No SVHC
- Package Type :
- SOIC
- Voltage Gain :
- 126dB
- Reach Compliance Code :
- Compliant
- Operating Supply Current :
- 6 mA
- RoHS :
- Details
- Output Current per Channel :
- 90 mA
- Output Current :
- 90mA
- Number of Circuits :
- 2
- Terminal Position :
- Dual
- RoHS Status :
- ROHS3 Compliant
- Power Supplies :
- 3/5V
- Seated Height-Max :
- 1.75 mm
- Maximum Operating Supply Voltage :
- 5.5 V
- Radiation Hardening :
- No
- Frequency Compensation :
- yes
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Datasheets
- MCP662-E/SN
MCP662-E/SN Documents

2 Channels 90 mA per Channel 6pA 64 dB Instrumentational OP Amps 0.005μA 3, 15 V 2.5V~5.5V ±1.25V~2.75V MCP662 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP662-E/SN Overview
In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 2.5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 8mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 6 mA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 126dB at all times. A instrumentation amplifier like this has 2 circuits. On the buffer amps, there are 2 channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 3, 15 V. There is a recommendation that this electrical part be used with a supply with 6mA current rating. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 25100. 8 wire terminals are provided on this op amp.
MCP662-E/SN Features
8 Pins
supply voltage of 2.5V
126dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP662-E/SN Applications
There are a lot of Microchip Technology
MCP662-E/SN Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















