MCP660-E/ML
- Mfr.Part #
- MCP660-E/ML
- Manufacturer
- Microchip Technology
- Package / Case
- 16-VQFN Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP GP 3 CIRCUIT 16QFN
- Stock
- 196
- In Stock :
- 196
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Packing Method :
- Tube
- Output Current :
- 90mA
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Nominal Supply Current :
- 6mA
- Terminal Position :
- QUAD
- Length :
- 4mm
- Number of Terminals :
- 16
- Number of Circuits :
- 3
- Dual Supply Voltage (Max) :
- Not Required(V)
- HTS Code :
- 8542.39.00.01
- Number of Channels :
- 3 Channel
- Qualification Status :
- Not Qualified
- RoHS :
- Details
- Maximum Operating Temperature :
- + 125 C
- Input Offset Voltage :
- (mV)
- Mounting Style :
- SMD/SMT
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Current - Supply :
- 6mA
- Terminal Pitch :
- 0.65mm
- Power Supply Requirement :
- Single
- Package Type :
- QFN EP
- Operating Temp Range :
- -40C to 125C
- Published :
- 2012
- Low-Offset :
- No
- Supply Type :
- Single
- Current - Input Bias :
- 6pA
- Supply Voltage Limit-Max :
- 6.5V
- Power :
- No
- Base Product Number :
- MCP660
- Maximum Input Offset Current :
- 0.00001(TYP)@5.5V
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Width :
- 4 mm
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Shut Down Feature :
- No
- JESD-30 Code :
- S-PQCC-N16
- Input Offset Voltage-Max :
- 8000 µV
- Maximum Operating Supply Voltage :
- 5.5 V
- Power Supply Type :
- Single
- Average Bias Current-Max (IIB) :
- 0.005μA
- ECCN Code :
- EAR99
- Supplier Package :
- QFN EP
- RoHS Status :
- ROHS3 Compliant
- Voltage Gain-Min :
- 25100
- Factory Lead Time :
- 17 Weeks
- Programmable Power :
- No
- Supplier Device Package :
- 16-QFN (4x4)
- Dual Supply Voltage (Min) :
- Not Required(V)
- Number of Elements :
- 3
- Seated Height-Max :
- 1 mm
- Frequency Compensation :
- yes
- Micropower :
- No
- Number of Terminations :
- 16
- Voltage Gain in dB :
- 126(dB)
- Qualification :
- AEC-Q100
- Base Part Number :
- MCP660
- Package / Case :
- 16-VQFN Exposed Pad
- Unity Gain BW-Nom :
- 60000 kHz
- Wideband :
- No
- Single Supply Voltage (Typ) :
- 3/5(V)
- Rad Hardened :
- No
- Product Category :
- Operational Amplifiers - Op Amps
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V ±1.25V~2.75V
- Slew Rate :
- 32V/μs
- Supply Voltage :
- 2.5V
- Current - Output / Channel :
- 90 mA
- Operating Supply Voltage :
- 2, 3.6 V
- Mounting :
- Surface Mount
- Single Supply Voltage (Min) :
- 2.5(V)
- Mount :
- Surface Mount
- Screening Level :
- Extended
- Packaging :
- Tube
- Common Mode Rejection Ratio :
- 64 dB
- Mounting Type :
- Surface Mount
- Low-Bias :
- yes
- Brand :
- Microchip Technology
- Terminal Form :
- NO LEAD
- Architecture :
- VOLTAGE-FEEDBACK
- Product Type :
- Op Amps - Operational Amplifiers
- Input Offset Voltage (Vos) :
- 8mV
- Height Seated (Max) :
- 1mm
- Single Supply Voltage (Max) :
- 5.5(V)
- Output Type :
- Rail-to-Rail
- Product :
- Operational Amplifiers
- Package :
- Tube
- Product Status :
- Active
- Operating Temperature :
- -40°C~125°C
- Series :
- --
- Voltage Gain :
- 126dB
- Unity Gain Bandwidth Product :
- 60
- Minimum Operating Temperature :
- - 40 C
- Power Supplies :
- 3/5 V
- Package Shape :
- Square
- Peak Reflow Temperature (Cel) :
- 260
- Type :
- General Purpose Amplifier
- Rail/Rail I/O Type :
- Rail to Rail Output
- Surface Mount :
- yes
- JESD-609 Code :
- e3
- Output Current per Channel :
- 90 mA
- Pin Count :
- 16
- Voltage - Input Offset :
- 1.8mV
- Operating Supply Current :
- 6 mA
- Operating Temperature Classification :
- Automotive
- Amplifier Type :
- GENERAL PURPOSE
- Shutdown :
- No Shutdown
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Gain Bandwidth Product :
- 60MHz
- Number of Pins :
- 16
- Shut Down Support :
- No
- Number of Channels per Chip :
- 3
- Power Supply Rejection Ratio :
- 61(dB)
- Number of Functions :
- 3
- Temperature Grade :
- Automotive
- Supply Current-Max :
- 27 mA
- Manufacturer :
- Microchip
- Reach Compliance Code :
- Compliant
- Datasheets
- MCP660-E/ML

3 Channel Channels 90 mA per Channel 6pA 64 dB Instrumentational OP Amps 0.005μA 2, 3.6 V 2.5V~5.5V ±1.25V~2.75V MCP660 16 Pins 16-VQFN Exposed Pad
MCP660-E/ML Overview
In the package, you will find a 16-VQFN Exposed Pad-case to contain the op amp ic. The instrumentation amplifier in this picture is of the General Purpose-type. A Tube case is used for delivering the op amp. During the past two weeks, there have been close to 16 terminations. A total of 16 pins are located on this board. This linear amplifier should be powered by an 2.5V battery. The op amp ic has an array of 16 pins on it. Op amp rates 8mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. Using an 6 mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 126dB for the time being. A instrumentation amplifier like this has 3 circuits. On the buffer amps, there are 3 Channel channels that can be used. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. 3 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 2, 3.6 V. The linear amplifier is packaged by using a TUBE axis. There is a recommendation that this electrical part be used with a supply with 6mA current rating. In this case, -- represents the instrumentation amplifiers' series number. In this op amp ic, the minimum voltage gain is 25100. 16 wire terminals are provided on this op amp.
MCP660-E/ML Features
16 Pins
supply voltage of 2.5V
126dB voltage gain
Output Type: Rail-to-Rail
16Terminations
MCP660-E/ML Applications
There are a lot of Microchip Technology
MCP660-E/ML Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















