MCP655T-E/MF
- Mfr.Part #
- MCP655T-E/MF
- Manufacturer
- Microchip Technology
- Package / Case
- 10-VFDFN Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 10DFN
- Stock
- 38,543
- In Stock :
- 38,543
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Operating Supply Current :
- 6 mA
- Product Type :
- Op Amps - Operational Amplifiers
- Common Mode Rejection Ratio :
- 65 dB
- Qualification :
- AEC-Q100
- Pin Count :
- 10
- HTS Code :
- 8542.33.00.01
- Number of Terminations :
- 10
- Width :
- 3 mm
- Slew Rate :
- 30V/µs
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Number of Circuits :
- 2
- Current - Output / Channel :
- 100mA
- Brand :
- Microchip Technology
- Low-Offset :
- yes
- Length :
- 3mm
- Mounting :
- Surface Mount
- Surface Mount :
- yes
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Max Supply Voltage :
- 5.5 V
- Power Supplies :
- 3/5V
- Manufacturer :
- Microchip
- Supplier Package :
- DFN EP
- Operating Supply Voltage :
- 5.5 V
- Supply Voltage Limit-Max :
- 6.5V
- Maximum Operating Temperature :
- + 125 C
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Seated Height-Max :
- 1 mm
- Shutdown :
- No Shutdown
- Current - Supply :
- 6mA
- Input Offset Voltage-Max :
- 200 µV
- Micropower :
- No
- Power :
- No
- Operating Temperature :
- -40°C~125°C
- Average Bias Current-Max (IIB) :
- 0.005μA
- Qualification Status :
- Not Qualified
- Frequency Compensation :
- yes
- Terminal Position :
- Dual
- ECCN Code :
- EAR99
- Input Bias Current :
- 6 nA
- RoHS Status :
- ROHS3 Compliant
- Product Status :
- Active
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V
- Amplifier Type :
- GENERAL PURPOSE
- Min Supply Voltage :
- 2.5 V
- Packaging :
- Tape and Reel (TR)
- Gain Bandwidth Product :
- 50MHz
- Current - Input Bias :
- 6pA
- Package Shape :
- Square
- Architecture :
- VOLTAGE-FEEDBACK
- Programmable Power :
- No
- Height Seated (Max) :
- 1mm
- Supply Type :
- Single
- Number of Channels :
- 2 Channel
- Nominal Supply Current :
- 6mA
- Wideband :
- No
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Min Operating Temperature :
- -40 °C
- Supply Current-Max :
- 18 mA
- Radiation Hardening :
- No
- Peak Reflow Temperature (Cel) :
- 260
- Number of Pins :
- 10
- Product Category :
- Operational Amplifiers - Op Amps
- Supply Voltage :
- 2.5V
- Supplier Device Package :
- 10-DFN (3x3)
- Package / Case :
- 10-VFDFN Exposed Pad
- RoHS :
- Details
- Packing Method :
- Tape and Reel
- Mounting Type :
- Surface Mount
- Output Current :
- 95mA
- Product :
- Operational Amplifiers
- Voltage Gain :
- 123dB
- Package :
- Tape and Reel (TR)
- Mounting Style :
- SMD/SMT
- Voltage Gain dB :
- 123 dB
- Number of Elements :
- 2
- Voltage Gain-Min :
- 25100
- JESD-30 Code :
- S-PDSO-N10
- Low-Bias :
- yes
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Mount :
- Surface Mount
- Base Product Number :
- MCP655
- Number of Functions :
- 2
- Base Part Number :
- MCP655
- Minimum Operating Temperature :
- - 40 C
- Height :
- 0.88 mm
- Screening Level :
- Extended
- Type :
- General Purpose Amplifier
- Series :
- mCal Technology
- Reach Compliance Code :
- Compliant
- Factory Lead Time :
- 8 Weeks
- Output Current per Channel :
- 95 mA
- JESD-609 Code :
- e3
- Terminal Pitch :
- 0.5mm
- Published :
- 2009
- Pbfree Code :
- yes
- Max Operating Temperature :
- 125 °C
- Output Type :
- Rail-to-Rail
- Terminal Form :
- NO LEAD
- Unity Gain BW-Nom :
- 50000 kHz
- Voltage - Input Offset :
- 200μV
- Number of Channels per Chip :
- 2
- Temperature Grade :
- Automotive
- Input Offset Voltage (Vos) :
- 200μV
- Maximum Operating Supply Voltage :
- 5.5 V
- Number of Terminals :
- 10
- Datasheets
- MCP655T-E/MF

2 Channel Channels 95 mA per Channel 6pA 65 dB Instrumentational OP Amps 0.005μA 5.5 V 2.5V~5.5V MCP655 10 Pins 10-VFDFN Exposed Pad
MCP655T-E/MF Overview
The linear amplifier is packaged in a 10-VFDFN Exposed Pad case. This is a General Purpose type op amp. Linear amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 10. Buffer amplifier has a total of 10 pins. Please take in mind that this instrumentation amplifier should be run at 2.5V. The buffer op amp includes 10 pins. Regarding input offset voltage, op amp rates 200μV. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~125°C. This op amp can operate from a supply current at 6 mA. Voltage gain should remain at 123dB. There are 2 circuits on this op amp. The op amp ic has 2 Channel channels on it. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The temperature should not be lower than -40 °C for operational amplifier ics to operate. Use op amps only at temperatures no higher than 125 °C. This linear amplifier has a total of 2 elements. The operating supply voltage of the buffer op amp is rated at 5.5 V. TAPE AND REEL is adopted to pack the instrumentation amplifier. It is recommended that this electronic component be used with an 6mA supply. With regard to the supply voltage, this electrical component is capable of working from under 5.5 V. It is advised to keep the op amp's supply voltage higher than 2.5 V. mCal Technology corresponds to the op amp's series. The minimum voltage gain this buffer op amp is able to conduct is 25100. This buffer amplifier is equipped with terminals for wires.
MCP655T-E/MF Features
10 Pins
supply voltage of 2.5V
123dB voltage gain
Output Type: Rail-to-Rail
10Terminations
MCP655T-E/MF Applications
There are a lot of Microchip Technology
MCP655T-E/MF Instrumentational OP Amps applications.
- Inverse/same-phase proportional circuit
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















