MCP652-E/MF
- Mfr.Part #
- MCP652-E/MF
- Manufacturer
- Microchip Technology
- Package / Case
- 8-VDFN Exposed Pad
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8DFN
- Stock
- 4
- In Stock :
- 4
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Current - Output / Channel :
- 100mA
- Factory Lead Time :
- 8 Weeks
- Peak Reflow Temperature (Cel) :
- 260
- Input Bias Current :
- 0.006(nA)
- Gain Bandwidth Product :
- 50MHz
- Number of Circuits :
- 2
- Number of Channels per Chip :
- 2
- Number of Terminals :
- 8
- Terminal Form :
- NO LEAD
- Low-Offset :
- yes
- Package / Case :
- 8-VDFN Exposed Pad
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V
- Architecture :
- VOLTAGE-FEEDBACK
- Nominal Supply Current :
- 6mA
- Common Mode Rejection Ratio :
- 65 dB
- Bandwidth :
- 50MHz
- Product Category :
- Operational Amplifiers - Op Amps
- Output Current per Channel :
- 95 mA
- Shut Down Feature :
- No
- Brand :
- Microchip Technology
- Mounting Type :
- Surface Mount
- Input Offset Voltage :
- 0.2(mV)
- Package :
- Tube
- Output Current :
- 95mA
- Min Operating Temperature :
- -40 °C
- Input Offset Voltage (Vos) :
- 200μV
- Reach Compliance Code :
- Compliant
- Slew Rate :
- 30V/µs
- Length :
- 3mm
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Product Type :
- Op Amps - Operational Amplifiers
- Dual Supply Voltage (Min) :
- Not Required(V)
- Current - Input Bias :
- 6pA
- Operating Temperature :
- -40°C~125°C
- Package Shape :
- Square
- Terminal Position :
- Dual
- Supply Current-Max :
- 18 mA
- Base Product Number :
- MCP652
- Max Supply Voltage :
- 5.5 V
- Unity Gain Bandwidth Product :
- 50
- Qualification Status :
- Not Qualified
- Voltage Gain :
- 123dB
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Maximum Operating Temperature :
- + 125 C
- Maximum Operating Supply Voltage :
- 5.5 V
- Output Type :
- Rail-to-Rail
- Width :
- 3mm
- RoHS Status :
- ROHS3 Compliant
- Operating Supply Voltage :
- 5.5 V
- Operating Supply Current :
- 6 mA
- Mounting Style :
- SMD/SMT
- Packaging :
- Tube
- Rail/Rail I/O Type :
- Rail to Rail Output
- Manufacturer :
- Microchip
- Voltage - Input Offset :
- 200μV
- Number of Amplifiers :
- 2
- Number of Pins :
- 8
- Supply Type :
- Single
- Voltage Gain in dB :
- 123(dB)
- Max Operating Temperature :
- 125 °C
- Dual Supply Voltage (Max) :
- Not Required(V)
- Packing Method :
- Tube
- Power Supply Rejection Ratio :
- 61(dB)
- Wideband :
- No
- Number of Elements :
- 2
- Amplifier Type :
- GENERAL PURPOSE
- Mount :
- Surface Mount
- Operating Temp Range :
- -40C to 125C
- Temperature Grade :
- Automotive
- Single Supply Voltage (Max) :
- 5.5(V)
- Terminal Pitch :
- 0.65mm
- Seated Height-Max :
- 1 mm
- Programmable Power :
- No
- Type :
- General Purpose Amplifier
- Shutdown :
- No Shutdown
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Voltage Gain dB :
- 123 dB
- Supply Voltage Limit-Max :
- 6.5V
- Product :
- Operational Amplifiers
- JESD-609 Code :
- e3
- Published :
- 2009
- Screening Level :
- Extended
- Product Status :
- Active
- Rad Hardened :
- No
- Number of Terminations :
- 8
- Package Type :
- DFN EP
- Frequency Compensation :
- yes
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- RoHS :
- Compliant
- Power Supplies :
- 3/5V
- JESD-30 Code :
- S-PDSO-N8
- Supplier Package :
- DFN EP
- Base Part Number :
- MCP652
- Input Offset Voltage-Max :
- 200 µV
- Current - Supply :
- 6mA
- REACH SVHC :
- No SVHC
- Qualification :
- AEC-Q100
- Radiation Hardening :
- No
- Number of Functions :
- 2
- Single Supply Voltage (Min) :
- 2.5(V)
- Unity Gain BW-Nom :
- 50000 kHz
- Supply Voltage :
- 2.5V
- Series :
- mCal Technology
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Micropower :
- No
- Lead Free :
- Lead Free
- Supplier Device Package :
- 8-DFN-EP (3x3)
- Power Supply Requirement :
- Single
- Surface Mount :
- yes
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Minimum Operating Temperature :
- - 40 C
- HTS Code :
- 8542.33.00.01
- Power :
- No
- Height :
- 880μm
- Pin Count :
- 8
- Low-Bias :
- yes
- Operating Temperature Classification :
- Automotive
- Mounting :
- Surface Mount
- Voltage Gain-Min :
- 25100
- Single Supply Voltage (Typ) :
- 3/5(V)
- Schedule B :
- 8542330000, 8542330000/8542330000, 8542330000/8542330000/8542330000, 8542330000/8542330000/8542330000/8542330000
- Average Bias Current-Max (IIB) :
- 0.005μA
- Min Supply Voltage :
- 2.5 V
- ECCN Code :
- EAR99
- Number of Channels :
- 2
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Datasheets
- MCP652-E/MF

2 Channels 95 mA per Channel 6pA 65 dB Instrumentational OP Amps 0.005μA 5.5 V 2.5V~5.5V MCP652 8 Pins 8-VDFN Exposed Pad
MCP652-E/MF Overview
In order to protect the op amps, a 8-VDFN Exposed Pad case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 2.5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 200μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~125°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 6 mA and 10 . Maintain 123dB as the voltage gain. In total, there are 2 circuits on this buffer amplifier. Buffer op amp is equipped with 2 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is recommended that the temperature of this op amp ic should not fall below -40 °C degrees Fahrenheit at any time. Linear amplifier shouldn't be used above 125 °C degrees. As a whole, there are 2 elements that make up this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. As a result of this, the buffer amplifier is packed in TUBE. This electronic part is recommended to be used with an 6mA supply for best performance. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 5.5 V. It is recommended that you keep the instrumentation amplifier's supply voltage higher than 2.5 V when using it. mCal Technology is the number that corresponds to the series of the buffer op amp. A minimum voltage gain of 25100 is the minimum voltage gain that this instrumentation amplifier is capable of producing. A linear amplifier such as this has 2 amplifiers on it. As part of this op amp ic, there are 8 terminals on which wires can be connected.
MCP652-E/MF Features
8 Pins
supply voltage of 2.5V
123dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP652-E/MF Applications
There are a lot of Microchip Technology
MCP652-E/MF Instrumentational OP Amps applications.
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















