MCP651T-E/SN
- Mfr.Part #
- MCP651T-E/SN
- Manufacturer
- Microchip Technology
- Package / Case
- 8-SOIC (0.154, 3.90mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT 8SOIC
- Stock
- 118
- In Stock :
- 118
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Product :
- Operational Amplifiers
- Terminal Position :
- Dual
- RoHS :
- Details
- Product Type :
- Op Amps - Operational Amplifiers
- Gain Bandwidth Product :
- 50MHz
- Voltage Gain dB :
- 123 dB
- Package / Case :
- 8-SOIC (0.154, 3.90mm Width)
- Average Bias Current-Max (IIB) :
- 0.005μA
- HTS Code :
- 8542.33.00.01
- Input Bias Current :
- 6 nA
- Reach Compliance Code :
- Compliant
- Pbfree Code :
- yes
- Seated Height-Max :
- 1.75 mm
- Number of Terminations :
- 8
- Supplier Device Package :
- 8-SOIC
- Peak Reflow Temperature (Cel) :
- 260
- Height :
- 1.25 mm (Min)
- Number of Pins :
- 8
- Maximum Operating Temperature :
- + 125 C
- Low-Bias :
- yes
- Minimum Operating Temperature :
- - 40 C
- Terminal Form :
- Gull wing
- Input Offset Voltage-Max :
- 200 µV
- Mounting Type :
- Surface Mount
- Supply Voltage Limit-Max :
- 6.5V
- Number of Circuits :
- 1
- Factory Lead Time :
- 8 Weeks
- Number of Channels :
- 1 Channel
- Nominal Supply Current :
- 6mA
- Width :
- 3.9 mm
- Supply Current-Max :
- 9 mA
- Base Product Number :
- MCP651
- Package :
- Tape and Reel (TR)
- Packaging :
- Tape and Reel (TR)
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Frequency Compensation :
- yes
- Voltage - Input Offset :
- 200μV
- Max Operating Temperature :
- 125 °C
- Slew Rate :
- 30V/µs
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Common Mode Rejection Ratio :
- 65 dB
- Type :
- General Purpose Amplifier
- Terminal Pitch :
- 1.27 mm
- Published :
- 2011
- Operating Temperature :
- -40°C~125°C
- Number of Functions :
- 1
- Qualification :
- AEC-Q100
- Voltage - Supply, Single/Dual (±) :
- 2.5V~5.5V
- Length :
- 4.9mm
- Surface Mount :
- yes
- Low-Offset :
- yes
- Radiation Hardening :
- No
- Output Type :
- Rail-to-Rail
- Current - Input Bias :
- 6pA
- Number of Terminals :
- 8
- Screening Level :
- Extended
- Power Supply Rejection Ratio (PSRR) :
- 61dB
- Packing Method :
- Tape and Reel
- Micropower :
- No
- Qualification Status :
- Not Qualified
- Mount :
- Surface Mount
- Output Current :
- 95mA
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Pin Count :
- 8
- Series :
- mCal Technology
- Voltage Gain-Min :
- 25100
- RoHS Status :
- ROHS3 Compliant
- Mounting Style :
- SMD/SMT
- Programmable Power :
- No
- Mounting :
- Surface Mount
- JESD-609 Code :
- e3
- Operating Supply Voltage :
- 5.5 V
- Operating Supply Current :
- 6 mA
- Min Operating Temperature :
- -40 °C
- JESD-30 Code :
- R-PDSO-G8
- Architecture :
- VOLTAGE-FEEDBACK
- Unity Gain BW-Nom :
- 50000 kHz
- Amplifier Type :
- GENERAL PURPOSE
- Base Part Number :
- MCP651
- Product Category :
- Operational Amplifiers - Op Amps
- Brand :
- Microchip Technology
- Supply Type :
- Single
- Power Supplies :
- 3/5V
- ECCN Code :
- EAR99
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Maximum Operating Supply Voltage :
- 5.5 V
- Wideband :
- No
- Shutdown :
- No Shutdown
- Voltage Gain :
- 123dB
- Power :
- No
- Max Supply Voltage :
- 5.5 V
- Package Shape :
- RECTANGULAR
- Input Offset Voltage (Vos) :
- 200μV
- Output Current per Channel :
- 95 mA
- Min Supply Voltage :
- 2.5 V
- Current - Output / Channel :
- 100mA
- Number of Channels per Chip :
- 1
- Current - Supply :
- 6mA
- Manufacturer :
- Microchip
- Supplier Package :
- SOIC N
- Supply Voltage :
- 2.5V
- Temperature Grade :
- Automotive
- Number of Elements :
- 1
- Product Status :
- Active
- Datasheets
- MCP651T-E/SN

1 Channel Channels 95 mA per Channel 6pA 65 dB Instrumentational OP Amps 0.005μA 5.5 V 2.5V~5.5V MCP651 8 Pins 8-SOIC (0.154, 3.90mm Width)
MCP651T-E/SN Overview
Packaging for the buffer amplifier is in the form of a 8-SOIC (0.154, 3.90mm Width) case. A General Purpose-type buffer amplifier is shown here. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. A total of 8 terminations have been reported in the past few weeks. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 2.5V. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 200μV. For this electrical component, the recommended mounting type is Surface Mount, which is the most common. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. Using a supply current of 6 mA , this buffer op amp will be able to operate. Keeping the voltage gain at 123dB is the best course of action. The buffer amp consists of 1 circuits in total. 1 Channel channels are available on the instrumentation amplifier. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. This op amp needs to be operated at a temperature of not less than -40 °C degrees Celsius in order to function properly. You should not use op amp above 125 °C degrees. A total of 1 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5.5 V. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. A supply of 6mA or higher is recommended for use with this electronic part. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 5.5 V, and this is an excellent feature. In order to ensure that the instrumentation amplifier's supply voltage remains above 2.5 V, it is recommended to keep it higher. The mCal Technology stands for the buffer op amp's serial number. There are a maximum of 25100 voltage gains that can be conducted by this operational amplifier at its minimum voltage gain. The buffer op amp has 8 terminals that can be used for connecting wires to the amplifier.
MCP651T-E/SN Features
8 Pins
supply voltage of 2.5V
123dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP651T-E/SN Applications
There are a lot of Microchip Technology
MCP651T-E/SN Instrumentational OP Amps applications.
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















