MCP6482T-E/MS
- Mfr.Part #
- MCP6482T-E/MS
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8MSOP
- Stock
- 8,589
- In Stock :
- 8,589
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- HTS Code :
- 8542.33.00.01
- RoHS Status :
- ROHS3 Compliant
- Length :
- 3mm
- Operating Supply Voltage :
- 5.5 V
- Height Seated (Max) :
- 1.1mm
- Manufacturer :
- Microchip
- Operating Supply Current :
- 240 uA
- Output Type :
- Rail-to-Rail
- Brand :
- Microchip Technology / Atmel
- Maximum Operating Temperature :
- + 125 C
- Reach Compliance Code :
- Compliant
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Voltage - Input Offset :
- 1.5mV
- Current - Output / Channel :
- 12mA
- Number of Circuits :
- 2
- Input Offset Voltage-Max :
- 1500 µV
- Supplier Package :
- MSOP
- Factory Lead Time :
- 7 Weeks
- Voltage - Supply, Single/Dual (±) :
- 2.2V~5.5V ±1.1V~2.75V
- Pin Count :
- 8
- Mounting Type :
- Surface Mount
- Terminal Pitch :
- 0.65mm
- Product :
- Operational Amplifiers
- Surface Mount :
- yes
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Number of Functions :
- 2
- Temperature Grade :
- Automotive
- Unity Gain BW-Nom :
- 4000 kHz
- Terminal Position :
- Dual
- Operating Temperature :
- -40°C~125°C
- Slew Rate :
- 2.7V/μs
- Series :
- --
- Product Category :
- Operational Amplifiers - Op Amps
- Seated Height-Max :
- 1.1 mm
- Maximum Operating Supply Voltage :
- 5.5 V
- Supply Voltage Limit-Max :
- 6.5V
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- JESD-609 Code :
- e3
- Current - Input Bias :
- 1pA
- Number of Channels per Chip :
- 2
- Mount :
- Surface Mount
- Gain Bandwidth Product :
- 4MHz
- Shutdown :
- No Shutdown
- Package Shape :
- Square
- Number of Terminals :
- 8
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Terminal Form :
- Gull wing
- Number of Terminations :
- 8
- JESD-30 Code :
- S-PDSO-G8
- Amplifier Type :
- GENERAL PURPOSE
- Common Mode Rejection Ratio :
- 65 dB
- Current - Supply :
- 240μA
- Qualification :
- AEC-Q100
- Base Product Number :
- MCP6482
- Radiation Hardening :
- No
- Published :
- 2013
- RoHS :
- Details
- Input Offset Voltage (Vos) :
- 2.75V
- Mounting :
- Surface Mount
- Voltage Gain :
- 115dB
- Product Status :
- Active
- Minimum Operating Temperature :
- - 40 C
- Type :
- General Purpose Amplifier
- Mounting Style :
- SMD/SMT
- Screening Level :
- Extended Industrial
- ECCN Code :
- EAR99
- Peak Reflow Temperature (Cel) :
- 260
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Supplier Device Package :
- 8-MSOP
- Supply Voltage :
- 3V
- Number of Channels :
- 2 Channel
- Product Type :
- Op Amps - Operational Amplifiers
- Packaging :
- Tape and Reel (TR)
- Output Current per Channel :
- 12 mA
- Width :
- 3 mm
- Base Part Number :
- MCP6482
- Datasheets
- MCP6482T-E/MS

2 Channel Channels 12 mA per Channel 1pA 65 dB Instrumentational OP Amps 5.5 V 2.2V~5.5V ±1.1V~2.75V MCP6482 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
MCP6482T-E/MS Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a General Purpose-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 3V battery and that the battery should be inserted in the amplifier. Op amp ic rates 2.75V for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 240 uA can be used to operate this linear amplifier. There should be no change in the voltage gain at 115dB. This op amp ic has 2 circuits. There are a total of 2 Channel channels available on the op amps. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5.5 V. For optimal performance, this electrical part should be connected to a supply with a current of 240μA. Buffer op amp series numbers are indicated by the --. There are 8 wire terminals on this op amp ic.
MCP6482T-E/MS Features
8 Pins
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6482T-E/MS Applications
There are a lot of Microchip Technology
MCP6482T-E/MS Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















