MCP6441T-E/LT
- Mfr.Part #
- MCP6441T-E/LT
- Manufacturer
- Microchip Technology
- Package / Case
- 5-TSSOP, SC-70-5, SOT-353
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT SC70-5
- Stock
- 11,417
- In Stock :
- 11,417
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Power Supply Type :
- Single
- Frequency Compensation :
- yes
- RoHS Status :
- ROHS3 Compliant
- Package / Case :
- 5-TSSOP, SC-70-5, SOT-353
- Low-Offset :
- No
- Rad Hardened :
- No
- Shutdown :
- No Shutdown
- HTS Code :
- 8542.33.00.01
- Base Part Number :
- MCP6441
- Type :
- General Purpose Amplifier
- Current - Input Bias :
- 1pA
- Operating Supply Current :
- 450 nA
- Architecture :
- VOLTAGE-FEEDBACK
- Power Supply Rejection Ratio :
- 65(dB)
- Number of Terminations :
- 5
- Supplier Device Package :
- SC-70-5
- Terminal Form :
- Gull wing
- Input Offset Voltage (Vos) :
- 4.5mV
- Bandwidth :
- 9 kHz
- Package Shape :
- RECTANGULAR
- Low-Bias :
- yes
- Wideband :
- No
- Dual Supply Voltage (Max) :
- Not Required(V)
- Programmable Power :
- No
- Factory Lead Time :
- 7 Weeks
- Mount :
- Surface Mount
- Output Current :
- 22mA
- Mounting Type :
- Surface Mount
- Voltage Gain :
- 110dB
- Number of Channels per Chip :
- 1
- Published :
- 2010
- Supply Type :
- Single
- Pin Count :
- 5
- Amplifier Type :
- GENERAL PURPOSE
- Number of Pins :
- 5
- Input Offset Voltage-Max :
- 4500 µV
- Power Supply Requirement :
- Single
- Supply Voltage :
- 5V
- Peak Reflow Temperature (Cel) :
- 260
- Common-mode Reject Ratio-Min :
- 60 dB
- Reach Compliance Code :
- Compliant
- Supplier Package :
- SC-70
- Single Supply Voltage (Typ) :
- 3/5(V)
- Maximum Operating Temperature :
- + 125 C
- Nominal Supply Current :
- 450nA
- JESD-609 Code :
- e3
- Current - Supply :
- 450nA
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Supply Current-Max :
- 0.00065 mA
- Input Offset Voltage :
- 4.5@6V(mV)
- Package Type :
- SC-70
- Output Current per Channel :
- 22 mA
- Base Product Number :
- MCP6441
- Surface Mount :
- yes
- Single Supply Voltage (Max) :
- 6(V)
- Number of Elements :
- 1
- REACH SVHC :
- No SVHC
- Operating Temperature :
- -40°C~125°C
- Voltage - Supply, Single/Dual (±) :
- 1.4V~6V
- Number of Functions :
- 1
- Terminal Position :
- Dual
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Power Supplies :
- 1.5/5 V
- Micropower :
- yes
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Product Type :
- Op Amps - Operational Amplifiers
- Packaging :
- Tape and Reel (TR)
- Number of Channels :
- 1
- Seated Height-Max :
- 1.1 mm
- Gain Bandwidth Product :
- 9kHz
- Unity Gain BW-Nom :
- 9000 kHz
- RoHS :
- Details
- Mounting :
- Surface Mount
- Radiation Hardening :
- No
- Mounting Style :
- SMD/SMT
- Number of Terminals :
- 5
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Shut Down Feature :
- No
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Slew Rate :
- 0.003V/μs
- Voltage Gain-Min :
- 31620
- Dual Supply Voltage (Min) :
- Not Required(V)
- ECCN Code :
- EAR99
- Temperature Grade :
- Automotive
- Product Category :
- Operational Amplifiers - Op Amps
- Series :
- --
- Operating Supply Voltage :
- 3, 3.6 V
- Qualification Status :
- Not Qualified
- Brand :
- Microchip Technology / Atmel
- Single Supply Voltage (Min) :
- 1.4(V)
- Packing Method :
- Tape and Reel
- Manufacturer :
- Microchip
- Minimum Operating Temperature :
- - 40 C
- Maximum Operating Supply Voltage :
- 6 V
- Voltage - Input Offset :
- 4.5mV
- Operating Temperature Classification :
- Automotive
- Pbfree Code :
- yes
- Power :
- No
- Terminal Pitch :
- 0.65 mm
- Supply Voltage Limit-Max :
- 7V
- Product :
- Operational Amplifiers
- JESD-30 Code :
- R-PDSO-G5
- Length :
- 2.25mm
- Shut Down Support :
- No
- Input Type :
- Rail-to-Rail
- Product Status :
- Active
- Contact Plating :
- Tin
- Height :
- 1mm
- Operating Temp Range :
- -40C to 125C
- Number of Circuits :
- 1
- Voltage Gain dB :
- 110 dB
- Common Mode Rejection Ratio :
- 60 dB
- Width :
- 1.35mm
- Output Type :
- Rail-to-Rail
- Qualification :
- AEC-Q100
- Voltage Gain in dB :
- 110(dB)
- Power Supply Rejection Ratio (PSRR) :
- 65dB
- Unity Gain Bandwidth Product :
- 0.009
- Lead Free :
- Lead Free
- Screening Level :
- Extended
- Maximum Input Offset Current :
- 0.000001(TYP)@6V
- Datasheets
- MCP6441T-E/LT

1 Channels 22 mA per Channel 1pA 60 dB Instrumentational OP Amps 3, 3.6 V 1.4V~6V MCP6441 5 Pins 5-TSSOP, SC-70-5, SOT-353
MCP6441T-E/LT Overview
There is a 5-TSSOP, SC-70-5, SOT-353 case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 5h termination of the year. In total, there are 5 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. 5 pins are located on the operational amplifiers. The input offset voltage is 4.5mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 450 nA . It is recommended to keep the voltage gain at 110dB at all times. This op amp contains 1 circuits. On the buffer amps, there are 1 channels that can be used. One of the many benefits of this op amp ic is that it emits Rail-to-Rail signals. The total number of elements in this buffer amplifier is 1. The operating supply voltage of the buffer op amp is rated at 3, 3.6 V. This linear amplifier pack is based on the TAPE AND REEL axis. It is recommended that you use an 450nA power supply with this electrical part in order for it to operate correctly. Instrumentation amplifiers are numbered by their -- series. This op amp ic is capable of conducting at least 31620 voltage gains. There are 5 terminals for wires on this op amp ic.
MCP6441T-E/LT Features
5 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
5Terminations
MCP6441T-E/LT Applications
There are a lot of Microchip Technology
MCP6441T-E/LT Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















