MCP6422-E/MS
- Mfr.Part #
- MCP6422-E/MS
- Manufacturer
- Microchip Technology
- Package / Case
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 2 CIRCUIT 8MSOP
- Stock
- 4
- In Stock :
- 4
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Radiation Hardening :
- No
- Gain Bandwidth Product :
- 90kHz
- Mount :
- Surface Mount
- Product Category :
- Operational Amplifiers - Op Amps
- Number of Elements :
- 2
- Maximum Operating Temperature :
- +125 °C
- Current - Supply :
- 4.4μA
- Reach Compliance Code :
- Compliant
- Output Type :
- Rail-to-Rail
- Terminal Pitch :
- 0.65mm
- Number of Functions :
- 2
- Power Supply Requirement :
- Single
- Dimensions :
- 3 x 3 x 0.95mm
- RoHS Status :
- ROHS3 Compliant
- Minimum Operating Temperature :
- -40 °C
- REACH SVHC :
- No SVHC
- RoHS :
- Details
- Average Bias Current-Max (IIB) :
- 0.00005μA
- Voltage - Supply, Single/Dual (±) :
- 1.8V~5.5V
- HTS Code :
- 8542.33.00.01
- Number of Circuits :
- 2
- Screening Level :
- TS 16949
- Factory Lead Time :
- 7 Weeks
- Nominal Supply Current :
- 4.4mA
- Bandwidth :
- 90kHz
- Rad Hardened :
- No
- Surface Mount :
- yes
- Mounting Type :
- Surface Mount
- Single Supply Voltage (Max) :
- 5.5(V)
- Seated Height-Max :
- 1.1 mm
- Pin Count :
- 8
- Operating Supply Voltage :
- 1.8 V to 5.5 V
- Voltage - Input Offset :
- 1mV
- JESD-30 Code :
- S-PDSO-G8
- Brand :
- Microchip Technology / Atmel
- Operating Supply Current :
- 4.4μA
- Number of Terminals :
- 8
- Single Supply Voltage (Min) :
- 1.8(V)
- Common Mode Rejection Ratio :
- 75 dB
- Length :
- 3mm
- Number of Terminations :
- 8
- Series :
- --
- Slew Rate :
- 0.05V/µs
- Maximum Input Offset Current :
- 0.000001(TYP)@5.5V
- Supply Voltage Limit-Max :
- 6.5V
- Amplifier Type :
- GENERAL PURPOSE
- Dual Supply Voltage (Max) :
- Not Required(V)
- JESD-609 Code :
- e3
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Power Supply Type :
- Single
- Temperature Grade :
- Automotive
- Package :
- Tube
- Published :
- 2004
- Operating Temp Range :
- -40C to 125C
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Height :
- 950μm
- Unity Gain BW-Nom :
- 90 kHz
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Shut Down Feature :
- No
- Voltage Gain :
- 115dB
- Rail to Rail :
- Rail to Rail Input/Output
- Unity Gain Bandwidth Product :
- 0.09
- Supply Voltage :
- 3V
- Operating Temperature :
- -40°C~125°C
- Dual Supply Voltage (Min) :
- Not Required(V)
- Product Status :
- Active
- Base Product Number :
- MCP6422
- Power Supply Rejection Ratio :
- 75(dB)
- Number of Channels per Chip :
- 2
- Width :
- 3mm
- ECCN Code :
- EAR99
- Base Part Number :
- MCP6422
- Input Offset Voltage (Vos) :
- 1mV
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Manufacturer :
- Microchip
- Terminal Form :
- Gull wing
- Shutdown :
- No Shutdown
- Input Offset Voltage-Max :
- 1000 µV
- Input Offset Voltage :
- 1(mV)
- Product :
- Operational Amplifiers
- Terminal Position :
- Dual
- Mounting :
- Surface Mount
- Package Type :
- MSOP
- Operating Temperature Classification :
- Automotive
- Package Shape :
- Square
- Current - Output / Channel :
- 22 mA
- Single Supply Voltage (Typ) :
- 3/5(V)
- Peak Reflow Temperature (Cel) :
- 260
- Number of Channels :
- 2
- Package / Case :
- 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Qualification :
- AEC-Q100
- Current - Input Bias :
- 1pA
- Packaging :
- Tube
- Supplier Device Package :
- 8-MSOP
- Voltage Gain in dB :
- 115(dB)
- Mounting Style :
- SMD/SMT
- Number of Pins :
- 8
- MSL :
- MSL 1 - Unlimited
- Product Type :
- Op Amps - Operational Amplifiers
- Output Current per Channel :
- 22mA
- Datasheets
- MCP6422-E/MS

2 Channels 22mA per Channel 1pA 75 dB Instrumentational OP Amps 0.00005μA 1.8 V to 5.5 V 1.8V~5.5V MCP6422 8 Pins 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
MCP6422-E/MS Overview
Packaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 3V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 1mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 4.4μA, this op amp ic can operate. 115dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 2 circuits. As far as the device is concerned, buffer amplifier has 2 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The linear amplifier consists of 2 different elements in total. The operating supply voltage of the buffer op amp is rated at 1.8 V to 5.5 V. As a result, it is recommended that a power supply of 4.4µA be used with this electronic part. As the name implies, -- refers to the series of the buffer op amp. The buffer op amp is equipped with 8 terminals for attaching wires to it.
MCP6422-E/MS Features
8 Pins
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
8Terminations
MCP6422-E/MS Applications
There are a lot of Microchip Technology
MCP6422-E/MS Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















