MCP6421T-E/LTY
- Mfr.Part #
- MCP6421T-E/LTY
- Manufacturer
- Microchip Technology
- Package / Case
- 5-TSSOP, SC-70-5, SOT-353
- Datasheet
- Download
- Description
- IC OPAMP GP 1 CIRCUIT SC70-5
- Stock
- 8,830
- In Stock :
- 8,830
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Supply Voltage :
- 3V
- Terminal Form :
- Gull wing
- Published :
- 2003
- Current - Supply :
- 4.4μA
- Supplier Device Package :
- SC-70-5
- MSL :
- MSL 1 - Unlimited
- Common-mode Reject Ratio-Min :
- 70 dB
- Input Offset Voltage-Max :
- 1000 µV
- Output Type :
- Rail-to-Rail
- Reach Compliance Code :
- Compliant
- RoHS Status :
- ROHS3 Compliant
- Mounting Type :
- Surface Mount
- Input Voltage Noise Density :
- 95nV/sqrt Hz
- Brand :
- Microchip Technology
- Series :
- --
- Bias Current-Max (IIB) @25C :
- 0.00005 µA
- Package Shape :
- RECTANGULAR
- Package / Case :
- 5-TSSOP, SC-70-5, SOT-353
- Voltage - Supply, Single/Dual (±) :
- 1.8V~5.5V ±0.9V~2.75V
- Number of Functions :
- 1
- Frequency Compensation :
- yes
- Product Category :
- Operational Amplifiers - Op Amps
- Peak Reflow Temperature (Cel) :
- 260
- Number of Elements :
- 1
- Gain Bandwidth Product :
- 90kHz
- Number of Circuits :
- 1
- Mounting Style :
- SMD/SMT
- Pin Count :
- 16
- Input Offset Voltage (Vos) :
- 1mV
- Factory Lead Time :
- 7 Weeks
- HTS Code :
- 8542.33.00.01
- Width :
- 1.25 mm
- Power Supplies :
- 2/5 V
- Seated Height-Max :
- 1.1 mm
- Product Status :
- Active
- Shut Down Support :
- No
- Length :
- 2mm
- Power Supply Type :
- Single
- Screening Level :
- TS 16949
- ECCN Code :
- EAR99
- Surface Mount :
- yes
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Operating Supply Current :
- 4.4μA
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Qualification :
- AEC-Q100
- Current - Input Bias :
- 1pA
- Bandwidth :
- 90kHz
- Low-Bias :
- yes
- Programmable Power :
- No
- Base Product Number :
- MCP6421
- Terminal Finish :
- Nickel/Palladium/Gold (Ni/Pd/Au)
- Number of Pins :
- 5
- Temperature Grade :
- Automotive
- Minimum Operating Temperature :
- - 40 C
- Number of Channels :
- 1 Channel
- Shutdown :
- No Shutdown
- Amplifier Type :
- GENERAL PURPOSE
- Product Type :
- Op Amps - Operational Amplifiers
- Voltage Gain :
- 115dB
- JESD-609 Code :
- e4
- Packaging :
- Tape and Reel (TR)
- Maximum Operating Temperature :
- + 125 C
- Supply Voltage Limit-Max :
- 6.5 V
- Slew Rate :
- 0.05V/µs
- Mount :
- Surface Mount
- Number of Terminals :
- 5
- Terminal Position :
- Dual
- JESD-30 Code :
- R-PDSO-G5
- Unity Gain BW-Nom :
- 90 kHz
- Average Bias Current-Max (IIB) :
- 0.00005 µA
- Low-Offset :
- No
- Micropower :
- yes
- Architecture :
- VOLTAGE-FEEDBACK
- Power Supply Rejection Ratio (PSRR) :
- 90dB
- Operating Temperature :
- -40°C~125°C
- Number of Terminations :
- 5
- Power :
- No
- Supply Current-Max :
- 0.0055 mA
- Packing Method :
- Tape and Reel
- Wideband :
- No
- Operating Supply Voltage :
- 1.8 V to 5.5 V
- Manufacturer :
- Microchip
- Common Mode Rejection Ratio :
- 70 dB
- Package :
- Tape and Reel (TR);Cut Tape (CT);Digi-Reel®;
- Output Current per Channel :
- 22mA
- RoHS :
- Details
- Terminal Pitch :
- 0.65 mm
- Voltage Gain-Min :
- 56200
- Base Part Number :
- MCP6421
- Product :
- Operational Amplifiers
- Qualification Status :
- Not Qualified
- Voltage - Input Offset :
- 1mV
- Datasheets
- MCP6421T-E/LTY

1 Channel Channels 22mA per Channel 1pA 70 dB Instrumentational OP Amps 0.00005 µA 1.8 V to 5.5 V 1.8V~5.5V ±0.9V~2.75V MCP6421 16 Pins 5-TSSOP, SC-70-5, SOT-353
MCP6421T-E/LTY Overview
Packaged in a 5-TSSOP, SC-70-5, SOT-353 case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 5. The pins on this board total to 16 in total. I would like to remind you that this buffer op amp should be powered by an 3V battery. A total of 5 pins are present on the instrumentation amplifier. There is an input offset voltage of 1mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 4.4μA, this op amp ic can operate. 115dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 1 circuits. As far as the device is concerned, buffer amplifier has 1 Channel channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. The linear amplifier consists of 1 different elements in total. The operating supply voltage of the buffer op amp is rated at 1.8 V to 5.5 V. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted. As a result, it is recommended that a power supply of 4.4µA be used with this electronic part. As the name implies, -- refers to the series of the buffer op amp. It is necessary to keep in mind that this instrumentation amplifier is able to conduct a minimum voltage gain of 56200. The buffer op amp is equipped with 5 terminals for attaching wires to it.
MCP6421T-E/LTY Features
16 Pins
supply voltage of 3V
115dB voltage gain
Output Type: Rail-to-Rail
5Terminations
MCP6421T-E/LTY Applications
There are a lot of Microchip Technology
MCP6421T-E/LTY Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















