MCP6404-E/ST
- Mfr.Part #
- MCP6404-E/ST
- Manufacturer
- Microchip Technology
- Package / Case
- 14-TSSOP (0.173, 4.40mm Width)
- Datasheet
- Download
- Description
- IC OPAMP GP 4 CIRCUIT 14TSSOP
- Stock
- 2,475
- In Stock :
- 2,475
Request A Quote(RFQ)
- * Fullname:
- * Company:
- * E-Mail:
- Phone:
- Comment:
- * Quantity:
- Manufacturer :
- Microchip Technology
- Product Category :
- Instrumentation, OP Amps, Buffer Amps
- Number of Circuits :
- 4
- Power Supply Requirement :
- Single
- Voltage - Input Offset :
- 4.5mV
- Peak Reflow Temperature (Cel) :
- 260
- Mounting Type :
- Surface Mount
- Number of Channels :
- 4
- JESD-30 Code :
- R-PDSO-G14
- Package :
- Tube
- Qualification :
- AEC-Q100
- Input Bias Current :
- 100 pA
- Minimum Operating Temperature :
- - 40 C
- Number of Functions :
- 4
- Product :
- Operational Amplifiers
- Width :
- 4.5mm
- Maximum Operating Supply Voltage :
- 6 V
- Packaging :
- Tube
- Product Status :
- Active
- Operating Temperature :
- -40°C~125°C
- Architecture :
- VOLTAGE-FEEDBACK
- Seated Height-Max :
- 1.2 mm
- Operating Supply Current :
- 45 uA
- Temperature Grade :
- Automotive
- Terminal Finish :
- Matte Tin (Sn) - annealed
- Length :
- 5.1mm
- Screening Level :
- Extended
- Shut Down Feature :
- No
- Product Category :
- Operational Amplifiers - Op Amps
- Supply Current-Max :
- 0.28 mA
- Reach Compliance Code :
- Compliant
- Mount :
- Surface Mount
- Package Type :
- TSSOP
- Schedule B :
- 8542390000
- Bandwidth :
- 1 MHz
- Bias Current-Max (IIB) @25C :
- 0.0001μA
- Lead Free :
- Lead Free
- Number of Amplifiers :
- 4
- Dual Supply Voltage (Typ) :
- Not Required(V)
- Voltage Gain-Min :
- 31620
- Radiation Hardening :
- No
- Shut Down Support :
- No
- Terminal Pitch :
- 0.65mm
- Max Supply Voltage :
- 6 V
- Frequency Compensation :
- yes
- Common Mode Rejection Ratio :
- 56 dB
- Single Supply Voltage (Typ) :
- 3/5(V)
- Voltage Gain in dB :
- 110(dB)
- Output Type :
- Rail-to-Rail
- Min Operating Temperature :
- -40 °C
- Micropower :
- yes
- Surface Mount :
- yes
- Input Offset Voltage :
- 4.5@6V(mV)
- Height :
- 1.05mm
- Shutdown :
- No Shutdown
- JESD-609 Code :
- e3
- Voltage Gain :
- 110dB
- Terminal Form :
- Gull wing
- RoHS Status :
- ROHS3 Compliant
- Rad Hardened :
- No
- Unity Gain Bandwidth Product :
- 1
- Packing Method :
- Tube
- Current - Input Bias :
- 1pA
- Package / Case :
- 14-TSSOP (0.173, 4.40mm Width)
- REACH SVHC :
- No SVHC
- RoHS :
- Compliant
- Number of Channels per Chip :
- 4
- Current - Output / Channel :
- 15 mA
- Nominal Supply Current :
- 45µA
- Supplier Package :
- TSSOP
- Published :
- 2008
- Mounting Style :
- SMD/SMT
- Number of Pins :
- 14
- Moisture Sensitivity Level (MSL) :
- 1 (Unlimited)
- Mounting :
- Surface Mount
- Dual Supply Voltage (Max) :
- Not Required(V)
- Pin Count :
- 14
- Lifecycle Status :
- Production (Last Updated: 2 years ago)
- Maximum Input Offset Current :
- 0.000001(TYP)@6V
- HTS Code :
- 8542.39.00.01
- Low-Bias :
- yes
- Max Operating Temperature :
- 125 °C
- ECCN Code :
- EAR99
- Power Supply Type :
- Single
- Voltage - Supply, Single/Dual (±) :
- 1.8V~6V
- Qualification Status :
- Not Qualified
- Supply Voltage :
- 1.8V
- Series :
- --
- Gain Bandwidth Product :
- 1MHz
- Slew Rate :
- 0.5V/μs
- Dual Supply Voltage (Min) :
- Not Required(V)
- Type :
- General Purpose Amplifier
- Package Shape :
- RECTANGULAR
- Input Offset Voltage-Max :
- 4500 µV
- Maximum Operating Temperature :
- + 125 C
- Power Supply Rejection Ratio :
- 63(dB)
- Factory Lead Time :
- 12 Weeks
- Number of Terminations :
- 14
- Low-Offset :
- No
- Supply Voltage Limit-Max :
- 7V
- Unity Gain BW-Nom :
- 1000 kHz
- Supplier Device Package :
- 14-TSSOP
- Base Part Number :
- MCP6404
- Operating Temperature Classification :
- AUTOMOTIVEC
- Output Current :
- 15mA
- Input Offset Voltage (Vos) :
- 4.5mV
- Power Supplies :
- 2/5V
- Power Supply Rejection Ratio (PSRR) :
- 63dB
- Amplifier Type :
- GENERAL PURPOSE
- Base Product Number :
- MCP6404
- Brand :
- Microchip Technology / Atmel
- MSL :
- MSL 1 - Unlimited
- Average Bias Current-Max (IIB) :
- 0.0001μA
- Number of Terminals :
- 14
- Single Supply Voltage (Min) :
- 1.8(V)
- Product Type :
- Op Amps - Operational Amplifiers
- Number of Elements :
- 4
- Min Supply Voltage :
- 1.8 V
- Operating Temp Range :
- -40C to 125C
- Output Current per Channel :
- 15 mA
- Time@Peak Reflow Temperature-Max (s) :
- 40
- Supply Type :
- Single
- Manufacturer :
- Microchip
- Terminal Position :
- Dual
- Current - Supply :
- 45µA
- Single Supply Voltage (Max) :
- 6(V)
- Operating Supply Voltage :
- 6 V
- Datasheets
- MCP6404-E/ST

4 Channels 15 mA per Channel 1pA 56 dB Instrumentational OP Amps 0.0001μA 6 V 1.8V~6V MCP6404 14 Pins 14-TSSOP (0.173, 4.40mm Width)
MCP6404-E/ST Overview
A 14-TSSOP (0.173, 4.40mm Width) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. It is estimated that there will be 14 terminations in the next few months. There are a total of 14 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 1.8V volts. There are 14 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 4.5mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~125°C . An 45 uA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On this instrumentation amplifier, there are 4 circuits that are connected together. There are 4 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. In order for op amp to function properly, the temperature should not be lower than -40 °C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 125 °C. There are a total of 4 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 6 V. The instrumentation amplifier is packed in the form of TUBE. As a recommendation, this electronic component should be used with a power supply that can deliver 45μA. I would like to point out that this electrical component is capable of working from a voltage below 6 V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 1.8 V at all times. The -- indicates the series number of the op amp. There is a minimum voltage gain of 31620 that this buffer op amp is capable of conducting. In total, there are 4 op amps on the device. In order to connect the buffer amplifier to the wires, it is equipped with 14 terminals.
MCP6404-E/ST Features
14 Pins
supply voltage of 1.8V
110dB voltage gain
Output Type: Rail-to-Rail
14Terminations
MCP6404-E/ST Applications
There are a lot of Microchip Technology
MCP6404-E/ST Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
You may place an order without registering to Chip IC. We strongly recommend that you log in before purchasing as you can track your order at any time.
RFQ (Request for Quotations)It is recommended to send RFQ to get the latest prices and stock availability about the part.Our sales will reply to your inquiry within 24 hours.
Payment MethodFor your convenience, we accept multiple payment methods in USD, Such as:PayPal, Credit Card, and wire transfer.
IMPORTANT NOTICEYou may place an order without registering to 1. You'll receive an order confirmations by e-mail soon . (Please remember to check the spam box if you didn't hear from us). 2. Since stock availability and prices may change at any time, the sales will reconfirm the order details and update you at soonest time.
Most of our products are shipped via FEDEX,DHL,UPS and SF EXPRESS...
Shipping CostShipping Cost starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).If customer have shipping account, we can make shipment under customer’s shipping account with freight collect directly.
The basic freight (for package ≤0.5 KG ) depends on the time zones and countries
Once the goods are shipped, estimated delivery time depends on the shipping methods you chose. You can track it by the tracking no.
















